• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3803-3810
• /
• 2022

OpenMC is a community-driven open-source Monte Carlo neutron and photon transport simulation code. The Weight Window Mesh (WWM) function and an automatic Global Variance Reduction (GVR) method was recently developed and implemented in a developmental branch of OpenMC. This WWM function and GVR method broaden OpenMC's usage in general purposes deep penetration shielding calculations. However, the Local Variance Reduction (LVR) method, which suits the source-detector problem, is still missing in OpenMC. In this work, the Weight Window Generator (WWG) function has been developed and benchmarked for the same branch. This WWG function allows OpenMC to generate the WWM for the source-detector problem on its own. Single-material cases with varying shielding and sources were used to benchmark the WWG function and investigate how to set up the particle histories utilized in WWG-run and WWM-run. Results show that there is a maximum improvement of WWM generated by WWG. Based on the above results, instructions on determining the particle histories utilized in WWG-run and WWM-run for optimal computation efficiency are given and tested with a few multi-material cases. These benchmarks demonstrate the ability of the OpenMC WWG function and the above instructions for the source-detector problem. This developmental branch will be released and merged into the main distribution in the future.

• Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.113-118
• /
• 2015

An important problem in low-dose CT is the image quality degradation caused by photon starvation. There are a lot of algorithms in sinogram domain or image domain to solve this problem. In view of strong self-similarity contained in the special sinusoid-like strip data in the sinogram space, we propose a novel non-local filtering, whose average weights are related to both the image FBP (filtered backprojection) reconstructed from restored sinogram data and the image directly FBP reconstructed from noisy sinogram data. In the process of sinogram restoration, we apply a non-local method with smoothness parameters adjusted adaptively to the variance of noisy sinogram data, which makes the method much effective for noise reduction in sinogram domain. Simulation experiments show that our proposed method by filtering in both image and projection domains has a better performance in noise reduction and details preservation in reconstructed images.

• Korean Journal of Remote Sensing
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2015

The essential idea of de-noising is referring to neighboring pixels of a center pixel to be updated. Conventional adaptive de-noising filters use local statistics, i.e., mean and variance, of neighboring pixels including the center pixel. The drawback of adaptive de-noising filters is that their performance becomes low when edges are contained in neighboring pixels, while anisotropic diffusion de-noising filters remove adaptively noises and preserve edges considering intensity difference between neighboring pixel and the center pixel. The anisotropic diffusion de-noising filters, however, use only intensity difference between neighboring pixels and the center pixel, i.e., local statistics of neighboring pixels and the center pixel are not considered. We propose a new connectivity function of two adjacent pixels using statistics of neighboring pixels and apply connectivity function to diffusion coefficient. Experimental results using an aerial image corrupted by uniform and Gaussian noises showed that the proposed algorithm removed more efficiently noises than conventional diffusion filter and median filter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2068-2086
• /
• 2011

Based on the quincunx sub-sampling grid, the New Interleaved Hierarchical INTerpolation (NIHINT) method is recognized as a superior pyramid data structure for the lossless and progressive coding of natural images. In this paper, we propose a new image interpolation algorithm, Edge Adaptive Hierarchical INTerpolation (EAHINT), for a further reduction in the entropy of interpolation errors. We compute the local variance of the causal context to model the strength of a local edge around a target pixel and then apply three statistical decision rules to classify the local edge into a strong edge, a weak edge, or a medium edge. According to these local edge types, we apply an interpolation method to the target pixel using a one-directional interpolator for a strong edge, a multi-directional adaptive weighting interpolator for a medium edge, or a non-directional static weighting linear interpolator for a weak edge. Experimental results show that the proposed algorithm achieves a better compression bit rate than the NIHINT method for lossless image coding. It is shown that the compression bit rate is much better for images that are rich in directional edges and textures. Our algorithm also shows better rate-distortion performance and visual quality for progressive image transmission.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.1
• /
• pp.111-118
• /
• 1996

In this paper, topographic edge points are detected from digital elevation model. Topographic edge points can be considered as the points which have rapid variation from its neighborhood. In this study, these points are dotected by Laplacian operator and noise reduction system is applied to remove small ripple. The results of this study show that Laplacian operator detects efficiently the topographic edge points, and that noise reduction system by local variance is efficient to remove small ripple but inefficient to reconstruct topographical features.

• Particle and aerosol research
• /
• v.7 no.3
• /
• pp.99-108
• /
• 2011

To establish area specific control strategies for the reduction of the ozone concentration, the Ozone Isopleth Plotting Package for Research(OZIPR) model has been widely used. However, the model results tend to changed by various input parameters such as the background concentration, emission amount of NOx and volatile organic compounds (VOCs), and meteorological condition. Thus, sensitivity analysis should be required to ensure the reliability of the result. The OZIPR modeling results for five local government districts in the Seoul Metropolitan Area (SMA) in June 2000 were used for the sensitivity analysis. The sensitivity analysis result showed that the modeling result of the SMA being VOC-limited region be still valid for a wide range of input parameters' variation. The estimated ozone concentrations were positively related with the initial VOCs concentrations while were negatively related with the initial NOx concentrations. But, the degree of the variations at each local district was different suggesting area specific characteristics being also important. Among the five local governments, Suwon was chosen to identify other variance through the period from April to September in 2000. The monthly modeling results show different ozone values, but still showing the characteristics of VOCs-limited region. Limitations due to not considering long range transport and transfer from neighbor area, limitation of input data, error between observed data and estimated data are all discussed.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2119-2129
• /
• 2020

Flow-accelerated corrosion (FAC), liquid droplet impingement erosion (LDIE), cavitation and flashing can cause continuous wall-thinning in nuclear secondary pipes. In order to prevent pipe rupture events resulting from the wall-thinning, most NPPs (nuclear power plants) implement their management programs, which include periodic thickness inspection using UT (ultrasonic test). Meanwhile, it is well known in field experiences that the thickness measurement errors (or deviations) are often comparable with the amount of thickness reduction. Because of these errors, it is difficult to estimate wall-thinning exactly whether the significant thinning has occurred in the inspected components or not. In the previous study, the authors presented an approximate estimation procedure as the first step for thickness measurement deviations at each inspected component and the statistical & quantitative characteristics of the measurement deviations using plant experience data. In this study, statistical significance was quantified for the current methods used for wall-thinning determination. Also, the authors proposed new estimation procedures for determining local wall-thinning to overcome the weakness of the current methods, in which the proposed procedure is based on analysis of variance (ANOVA) method using subgrouping of measured thinning values at all measurement grids. The new procedures were also quantified for their statistical significance. As the results, it is confirmed that the new methods have better estimation confidence than the methods having used until now.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.175-182
• /
• 1998

Any classification process using SAR images presupposes the reduction of multiplicative speckle noise, since the variations caused by speckle make it extremely difficult to distinguish between neighboring classes within the feature space. Therefore, several adaptive filter algorithms have been developed in order to distinguish between them. These algorithms aim at the preservation of edges and single scattering peaks, and smooths homogeneous areas as much as possible. This task is rendered more difficult by the multiplicative nature of the speckle noise the signal variation depends on the signal itself. In this paper, LEE(Lee 1908) and R-LEE(Lee 1981) filters using local statistics, local mean and variance, are applied to RADARSAT SAR images. Also, a new method of speckle filtering, EPOS(Edge Preserving Optimal Speckle)(Hagg & Sties 1994) filter based on the statistical properties of speckle noise is described and applied. And then, the results of filtering SAR images with LEE, R-LEE and EPOS filters are compared with mean and median filters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.629-635
• /
• 2017

In this paper, we proposed a nonlinear synthesis filter for noise reduction to reduce the effects of Gaussian noise and impulse noise. When the centralization of the local mask is judged to be Gaussian noise by the noise judgment, the weight value of the weight filter are applied differently according to the spatial weight filter and the pixel change by using the sample variance in the local mask. And if it is determined as the impulse noise, we proposed an algorithm that applies different weights of local histogram weight filter and standard median filter according to noise density of mask. In order to evaluate the performance of the proposed filter algorithm, we used PSNR(peak signal to noise ratio) and compared existing methods and proposed filter algorithm in the mixed noise environment with Gaussian noise, impulsive noise, and two noises mixed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2369-2381
• /
• 1999

In this paper, we propose an iterative algorithm for reducing the blocking artifact in block transform-coded images by using a wavelet transform. In the proposed method, an image is considered as a set of one-dimensional horizontal and vertical signals and one-dimensional wavelet transform is utilized in which the mother wavelet is the first order derivative of a Gaussian like function. The blocking artifact is reduced by removing the blocking component, that causes the variance at the block boundary position in the first scale wavelet domain to be abnormally higher than those at the other positions, using a minimum mean square error (MMSE) filter in the wavelet domain. This filter minimizes the MSE between the ideal blocking component-free signal and the restored signal in the neighborhood of block boundaries in the wavelet domain. It also uses local variance in the wavelet domain for pixel adaptive processing. The filtering and the projection onto a convex set of quantization constraint are iteratively performed in alternating fashion. Experimental results show that the proposed method yields not only a PSNR improvement of about 0.56-1.07 dB, but also subjective quality nearly free of the blocking artifact and edge blur.