• 대한원격탐사학회지
• /
• 제23권3호
• /
• pp.189-198
• /
• 2007

Introduction of lidar technology have contributed to a wide range of applications in generating quality surface models. Accordingly, because of the importance of terrain surface models in mapping applications, rigorous studies have been performed to extract ground points from a lidar data point cloud. Although most filters have been shown abilities to extract ground points with their parameters tuned, however, most experiments revealed that there are certain limitations in optimizing filter parameters and the correction of remaining misclassified points is not straightforward. In this study, therefore, a method to improve the quality of filtered lidar data is proposed, which exploits neighboring surface properties arising between immediate neighbors. The method comprises a sequence of procedures which can reduce commission and omission errors. Commission errors occurring in low-rise objects are reduced by utilizing morphological operations. On the other hand, omission errors are reduced by adding missing ground points around step edges. Experimental results show that the qualities of filtered data can be improved considerably by the proposed method.

• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.79-92
• /
• 2015

In this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with $0^{\circ}$ orientations in this study. Fiber volume fraction ($v_f$), fiber aspect ratio ($L_f/d_f$), damage length ($L_D$) and its location (${\lambda}/L$), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.244-253
• /
• 2015

본 논문은 비의도 움직임 검출 및 적응적 움직임 완화 필터를 이용한 동영상 안정화 기법을 제안한다. 제안된 기법은 비의도 움직임 검출 단계와 검출된 비의도 움직임을 완화 필터링하는 단계로 구성된다. 움직임 완화 과정에 요구되는 속성들을 활용하기 위하여 누적 전역 움직임 매개변수들로 구성된 집합의 국부 최대값과 국부 최소값을 정의한다. 국부 정보를 사용하여 비의도 움직임 검출에 필요한 제약조건을 정의하며, 제약조건들을 기반으로 하여 알파-조정 평균 필터의 알파 값을 결정하여 재구성된 동영상의 움직임 완화 정도를 제어한다. 실험 결과를 통해 제안된 방식의 성능 우수성을 입증하였다.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1349-1357
• /
• 2004

Computer-Aided Inspection Planning (CAIP) is the integration bridge between CAD/CAM and Computer Aided Inspection (CAI). A CAIP system for On-Machine Measurement (OMM) is proposed to inspect the complicated mechanical parts efficiently during machining or after machining. The inspection planning consists of Global Inspection Planning (GIP) and Local Inspection Planning (LIP). In the GIP, the system creates the optimal inspection sequence of the features in a part by analyzing the various feature information such as the relationship of the features, Probe Approach Directions (PAD), etc. Feature groups are formed for effective planning, and special feature groups are determined for sequencing. The integrated process and inspection plan is generated based on the sequences of the feature groups and the features in a feature group. A series of heuristic rules are developed to accomplish it. In the LIP of Part II, the system generates inspection parameters. The integrated inspection planning is able to determine optimum manufacturing sequence for inspection and machining processes. Finally, the results are simulated and analyzed to verify the effectiveness of the proposed CAIP.

• 한국운동역학회지
• /
• 제12권1호
• /
• pp.125-133
• /
• 2002

The purpose of this study was to develop a method for estimating 3-D coordinates of lower trunk muscles using orientation angles during a motion. Traditional 3-D motion analysis system with DLT technique was used to track down the locations of eight reference markers which were attached on the back of the subject. In order to estimate the orientations of individual lumbar vertebrae and musculoskeletal parameters of the lower trunk muscle, the rotation matrix of the middle trunk reference frame relative to the lower trunk reference frame was determined and the angular locations of individual lumbar vertebrae were estimated by partitioning the orientation angles (Cardan angles) that represent the relative angles between the rotations of the middle and lower trunks. When the orientation angles of individual intervertebral joints were known at a given instant, the instantaneous coordinates of the origin and insertion for all selected muscles relative to the L5 local reference frame were obtained by applying the transformation matrix to the original coordinates which were relative to a local reference frame (S1, L4, L3, L2, or L1) in a rotation sequence about the Z-, X- and Y-axes. The multiplication of transformation matrices was performed to estimate the geometry and kinematics of all selected muscles. The time histories of the 3-D coordinates of the origin and insertion of all selected muscles relative to the center of the L4-L5 motion segment were determined for each trial.

• 한국통신학회논문지
• /
• 제37권3A호
• /
• pp.172-178
• /
• 2012

This paper studies the application of a fuzzy-ARTMAP (FAM) neural network to multi-user detector (MUD) for direct sequence (DS)-code division multiple access (CDMA) system. This method shows new solution for solving the problems, such as complexity and long training, which is found when implementing the previously developed neural-basis MUDs. The proposed FAM based MUD is fast and easy to train and includes capabilities not found in other neural network approaches; a small number of parameters, no requirements for the choice of initial weights, automatic increase of hidden units, no risk of getting trapped in local minima, and the capabilities of adding new data without retraining previously trained data. In simulation studies, binary signals were generated at random in a linear channel with Gaussian noise. The performance of FAM based MUD is compared with other neural net based MUDs in terms of the bit error rate.

• 대한수학회논문집
• /
• 제20권1호
• /
• pp.145-159
• /
• 2005

In this paper we consider the problem of testing statistical hypotheses for unknown parameters in nonlinear regression models and propose three asymptotically equivalent tests based on regression quantiles estimators, which are Wald test, Lagrange Multiplier test and Likelihood Ratio test. We also derive the asymptotic distributions of the three test statistics both under the null hypotheses and under a sequence of local alternatives and verify that the asymptotic relative efficiency of the proposed test statistics with classical test based on least squares depends on the error distributions of the regression models. We give some examples to illustrate that the test based on the regression quantiles estimators performs better than the test based on the least squares estimators of the least absolute deviation estimators when the disturbance has asymmetric and heavy-tailed distribution.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.423-428
• /
• 1999

A high precision hot strip width control method has been developed in this study by applying interstand looper tension measuring system at finishing mill stands. As with deviation of hot rolled steel strip is closely related to abnormal increase in the interstand strip tension, on-line measuring device of looped tension and data analyzing system was developed in this study. To determine dominant factors that will cause local width shortage, the logged data sets of bar width, bar thickness, looper tension, and strip thickness along the strip length were correlated with the data set of strip width change. With the result of the correlation analysis, existing sequence control logic and parameters for looper actuator were modified for strip width quality and the gains of the looper control were refined for the stable operation during the full passage of rolled strip. The on-line tension measurement and tension feedback control for looper system improved strip travelling stability and reduced strip width deviation in the srip top end region.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.1041-1049
• /
• 2003

In this paper, a new local two-point approximation method which is based on the exponential intervening variable is proposed. This new algorithm, called the Two-Point Convex Approximation(TPCA), use the function and design sensitivity information from the current and previous design points of the sequential approximate optimization to generate a sequence of convex, separable subproblems. This paper describes the derivation of the parameters associated with the approximation and the numerical solution procedure. In order to show the numerical performance of the proposed method, a sequential approximate optimizer is developed and applied to solve several typical design problems. These optimization results are compared with those of other optimizers. Numerical results obtained from the test examples demonstrate the effectiveness of the proposed method.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.87-98
• /
• 1994

Object-oriented analysis-synthesis coding subdivides each image of a sequence into moving objects and compensates the motion of each object. Thus it can reconstruct real motion better than conventional motion-compensated coding techniques at very-low-bit-rates. It uses a mapping parameter technique for estimating motion information of each object. Since a mapping parameter technique uses gradient operators it is sensitive to redundant details and noise. To accurately determine mapping parameters, we propose a new analysis method using integral projections for estimation of gradient values. Also to reconstruct correctly the local motion the proposed algorithm divides an image into segmented objects each of which having uniform motion information while the conventional one assumes a large object having the same motion information. Computer simulation results with several test sequences show that the proposed image analysis method in object-oriented analysis-synthesis coding shows better performance than the conventional one.