• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.63-71
• /
• 2006

An automated carbonyl measurement system was constructed. Atmospheric carbonyl compounds were extracted onto DNPH containing collection solution while flowing through a glass coil. Each carbonyl species was separated on a HPLC column and quantified by UV absorption detector. Using this system, carbonyl compounds were continuously measured at the campus of Korea University in Seoul, Korea during June, 2005. Sampling resolution was 30 minutes and the detection limit of HCHO was 0.19 ppbv. Also, $\O_{3}$, it's precursors, and meteorological parameters were measured. The maximum, minimum, average, and median concentrations of HCHO during the whole experiment was 35.8 ppbv, 1.4 ppbv, 11.7 ppbv, and 9.3 ppbv respectively. Formaldehyde showed a distinct diurnal variation with a broad maximum around 13 $\sim$ 15, which was 1 $\sim$ 3 hours ahead of an ozone maximum. During a couple of days, however, HCHO concentrations were kept high through the night or increased concomitantly with NOx in the morning. These results imply that HCHO was mainly produced from the photochemical oxidation of VOCs, but local emission sources couldn't be ruled out. The differences between daily maximum and minimum of $O_{3}$ and HCHO were calculated for 11 days of June, when typical diurnal variations were observed for the two species. A strong positive correlation was found between $\Delta O_{3}$ and $\Delta HCHO$ and the average mole ratio of $\Delta HCHO$ to $\Delta O_{3}$ was 2.6. It indicates that formaldehyde played a key role in $\Delta O_{3}$ production as an indicator species in Metropolitan Seoul during June, 2005.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.169-172
• /
• 2004

Deep sub-micron device required to get the superior ultra thin gate oxide characteristics. In this research, I will recommend a novel shallow trench isolation structure(STI) for thin gate oxide and a $N_2$O gate oxide 30 $\AA$ by NO ambient process. The local oxidation of silicon(LOCOS) isolation has been replaced by the shallow trench isolation which has less encroachment into the active device area. Also for $N_2$O gate oxide 30 $\AA$, ultra thin gate oxide 30 $\AA$ was formed by using the $N_2$O gate oxide formation method on STI structure and LOCOS structure. For the metal electrode and junction, TiSi$_2$ process was performed by RTP annealing at 850 $^{\circ}C$ for 29 sec. In the viewpoints of the physical characteristics of MOS capacitor, STI structure was confirmed by SEM. STI structure was expected to minimize the oxide loss at the channel edge. Also, STI structure is considered to decrease the threshold voltage, result in a lower Ti/TiN resistance( Ω /cont.) and higher capacitance-gate voltage(C- V) that made the STI structure more effective. In terms of the TDDB(sec) characteristics, the STI structure showed the stable value of 25 % ～ 90 % more than 55 sec. In brief, analysis of the ultra thin gate oxide 30 $\AA$ proved that STI isolation structure and salicidation process presented in this study. I could achieve improved electrical characteristics and reliability for deep submicron devices with 30 $\AA$ $N_2$O gate oxide.

• 한국지역사회생활과학회지
• /
• 제20권4호
• /
• pp.549-558
• /
• 2009

This study examined the basic information on the native pear c.v. 'Baekwoon' grown in Mt. Baekwoonsan, Gwangyang, to develop as a local specialty product. the sensory characteristics, chemical compositions, and physiological activities of 'Baekwoon' pear were examined and compared with those of 'Niitaka' pear. Hardness of 'Baekwoon' pear was 19.30N, which was higher than 'Niitaka'. The sugar content of 'Baekwoon' was 11.5 $^{\circ}Brix$, which was lower than 'Niitaka'. The total amino acid contents of the fruit skin and flesh of 'Baekwoon' were 222 mg/100g dry weight (DW) and 130 mg/100g DW, respectively, which were much higher than those of 'Niitaka'. Especially, serine contents in fruit skin and flesh of 'Baekwoon' were 75.4 mg/100g DW and 40.2 mg/100g DW, respectively, which were significantly (p<0.05) higher than those of 'Niitaka'. However, physiological activities, such as total phenol content, DPPH radical scavenging activity, total flavonoid content and nitrite scavenging activity, of 'Baekwoon' were lower than or similar to those of 'Niitaka'. Consequently, vitamin and amino acid contents of 'Baekwoon' were better than those of 'Niitaka'. It is suggested to use fruit skin because of its good composition and physiological activities so that it helps to improve the quality and the biological activity.

• 대한환경공학회지
• /
• 제32권4호
• /
• pp.379-392
• /
• 2010

최근 국내에서 인공습지는 하 폐수처리장 방류수의 후처리, 비점오염원 관리, 생태하천 복원 등 다양한 용도로 적용되고 있다. 그러나 인공습지가 설치되는 지역의 기후, 유입수의 특성, 지역적 특성 등에 따라 매우 영향을 많이 받기 때문에 인공습지 내에서의 오염물질의 제거기작은 확실하게 이해되고 있지는 않다. 그러므로, 이 연구에서는 인공습지 내에서 질소, 인을 중심으로 한 오염물질의 제거기작을 중심으로 살펴보았다. 그 결과, 질소 제거의 주된 기작은 인공습지 내의 근권(rhizosphere)에서의 질산화/탈질에 의한 것으로 판단되며, 인 제거의 주된 기 작은 인공습지내 여재 등의 기층(substrate)에서의 흡착에 의한 것으로 판단된다. 그러나, 인공습지내의 인의 거동은 산화/환원 전위(ORP), 흡착/탈착, 미생물의 작용 등에 따라 다양한 형태를 가질 수 있는 것으로 판단된다.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.851-861
• /
• 2019

In this study, we performed a sediment elution experiment to evaluate water quality in terms of phosphorus, as influenced by the dissolved oxygen consumed by sediments. Three separate model column treatments, namely, raw, calcined, and sonicated oyster shell powders, were used in this experiment. Essential phosphorus fractions were examined to verify their roles in nutrient release from sediment based on correlation analyses. When treated with calcined or sonicated oyster shell powder, the sediment-water interface became "less anaerobic," thereby producing conditions conducive to partial oxidation and activities of aerobic bacteria. Sediment Oxygen Demand (SOD) was found to be closely correlated with the growth of algae, which confirmed an intermittent input of organic biomass at the sediment surface. SOD was positively correlated with exchangeable and loosely adsorbed phosphorus and organic phosphorus, owing to the accumulation of unbound algal biomass-derived phosphates in sediment, whereas it was negatively correlated with ferric iron-bound phosphorus or calcium fluorapatite-bound phosphorus, which were present in the form of "insoluble" complexes, thereby facilitating the free migration of sulfate-reducing bacteria or limiting the release from complexes, depending on applied local conditions. PCR-denaturing gradient gel electrophoresis revealed that iron-reducing bacteria were the dominant species in control and non-calcined oyster shell columns, whereas certain sulfur-oxidizing bacteria were identified in the column treated with calcined oyster powder.

• 한국분말재료학회지
• /
• 제30권6호
• /
• pp.516-520
• /
• 2023

Highly safe lithium-ion batteries (LIBs) are required for large-scale applications such as electrical vehicles and energy storage systems. A highly stable cathode is essential for the development of safe LIBs. LiFePO₄ is one of the most stable cathodes because of its stable structure and strong bonding between P and O. However, it has a lower energy density than lithium transition metal oxides. To investigate the high energy density of phosphate materials, vanadium phosphates were investigated. Vanadium enables multiple redox reactions as well as high redox potentials. LiVPO₄O has two redox reactions (V⁵⁺/V⁴⁺/V³⁺) but low electrochemical activity. In this study, LiVPO₄O is doped with fluorine to improve its electrochemical activity and increase its operational redox potential. With increasing fluorine content in LiVPO₄O_1-xF_x, the local vanadium structure changed as the vanadium oxidation state changed. In addition, the operating potential increased with increasing fluorine content. Thus, it was confirmed that fluorine doping leads to a strong inductive effect and high operating voltage, which helps improve the energy density of the cathode materials.

• Animal Bioscience
• /
• 제36권11호
• /
• pp.1738-1746
• /
• 2023

Objective: The aim of this study was to investigate quality characteristics of reduced-salt, low-fat pork sausage (PS) using pre-rigor muscle and sea tangle extract (STE) to reduce salt level of sausages during refrigerated storage. Methods: Pork ham was prepared with pre-rigor and post-rigor muscle from the local market. Sausages using post-rigor muscle were manufactured with the 1.5% of salt content, and samples with pre-rigor muscle were processed by different salt concentrations (0.8%). Accordingly, PSs were prepared in 4 treatments (REF, PS with 1.5% of salt using post-rigor muscle; CTL, PS with 0.8% of salt using pre-rigor muscle; TRT1, PS with 0.8% of salt and 5% of STE using pre-rigor muscle; TRT2, PS with 0.8% of salt and 10% of STE using pre-rigor muscle). For the evaluation of quality characteristics and shelf-life of reduced-salt PS, pH and color values, cooking loss (%), expressible moisture (%), textural properties, lipid oxidation (thiobarbituric reactive substances), protein denaturation (volatile basic nitrogen), and microbiological analysis (total plate counts and Enterobacteriaceae counts) were determined. Results: The pH and temperature of pre-rigor raw pork ham were higher than those of post-rigor pork ham. Hardness of TRT2 was higher than that of REF or CTL. TRT2 had higher gumminess and chewiness than CTL. TRT1 and TRT2 had lower volatile basic nitrogen than CTL. Total plate counts of TRT2 were lower than those of CTL. Expressible moisture values of TRT1 and TRT2 were similar to those of REF. The addition of STE into PS improved functional properties and shelf-life of PS. Conclusion: Reduced-salt PS containing pre-rigor muscle and STE had similar functional properties to those of regular-salt ones, while containing approximately 47% less salt compared to regular-salt level.

• Tribology and Lubricants
• /
• 제40권3호
• /
• pp.103-110
• /
• 2024

Gas foil thrust bearings (GFTBs) are oil-free self-acting hydrodynamic bearings that support axial loads with a low friction during airborne operation. They need solid lubricants to reduce dry-friction between the runner and top foil and minimize local wears on their surfaces during start-up and shutdown processes. In this study, we evaluate the lift-off speeds and load capacity performance of a GFTB with Polytetrafluoroethylene (PTFE) surface coating by measuring drag torques during a series of experimental tests at increasing ambient temperatures of 25, 75 and 110℃. An electric heat gun provides hot air to the test GFTB operating in the closed booth to increase the ambient temperature. Test results show that the increasing ambient temperature delays the lift-off speed and decreases the load capacity of the test GFTB. An early developed prediction tool well predicts the measured drag torques at 60 krpm. After all tests, post inspections of the surface coating of the top foil are conducted. Scanning electron microscope (SEM) images imply that abrasive wear and oxidation wear are dominant during the tests at 25℃ and 110℃, respectively. A quantitative energy dispersive spectroscopy (EDS) microanalysis reveals that the weight percentages of carbon, oxygen, and nitrogen decrease, while that of fluorine increases significantly during the highest-temperature tests. The study demonstrates that the increasing ambient temperature noticeably deteriorates the static performances and degrades the surface coating of the test GFTB.

• 한국식품영양학회지
• /
• 제28권3호
• /
• pp.415-421
• /
• 2015

This study investigated the quality change of strip loin from hanwoo with quality grade 2 produced by dry aging, and compared the quality of dry-aged strip loin with that of strip loin from hanwoo with quality grade $1^+$. Hanwoo strip loins with quality grade $1^+$ (SL1) and 2 (SL2) after a day of slaughter and dry-aged strip loin (DSL2) aged for 21 days at $2^{\circ}C$ with 85% humidity were obtained from local markets. The proximate composition, pH, cooking loss, lipid oxidation, instrumental color (CIE $L^*$, $a^*$ and $b^*$ value) and sensory properties of the strip loins were measured. DSL2 contained low moisture and high protein contents compared with SL2, and low fat, high protein, and high ash contents compared with SL1 (p<0.05). The pH and cooking loss were higher and lower, respectively, in DSL2 compared to SL2 (p<0.05). SL1 had a higher pH than DSL2 (p<0.05). However, the cooking loss was not different between SL1 and DSL2. The TBARS value was the highest in DSL2 and the lowest in SL2 (p<0.05). DSL2 had higher $L^*$ and $b^*$ value compared with SL2 (p<0.05). There were no significant differences of $L^*$, $a^*$ and $b^*$ values between DSL2 and SL1. Sensory properties such as the color, flavor, taste, texture, and acceptability of DSL2 were higher than those of SL2 (p<0.05). There was no significant different in all sensory properties between DSL2 and SL1. According to the results, dry aging can improve the nutritional and sensorial quality of strip loin with quality grade 2 to quality comparable to quality grade $1^+$.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.285-291
• /
• 2004

LiCl-$Li_2O-O_2$ 용융염계에서 용융염 취급장치의 구조재료를 위한 평가의 일환으로 Inconel 718, X-750, Haynes 75, 263 합금의 부식거동을 분위기온도; $650^{\circ}C$, 부식시간: 24~168h, $Li_2O$농도; 3wt%, 혼합가스농도; Ar-10%$O_2$에서 조사하였다. LiCl-$Li_2O-O_2$ 용융염계에서 부식속도는 Haynes 263 ＜ Haynes 75 ＜ Inconel X-750 ＜ Inconel 718 순서로 나타났으며, Haynes 263 합금이 가장 우수한 내부식성을 나타내었다. Haynes 75의 부식생성물은 $Cr_2O_4$, $NiFe_2O_4$, $LiNiO_2$, $Li_2NiFe_2O_4$, Inconel 718의 부식생성물은 $Cr_2O_4$ 및 $NiFe_2O_4$ 이며 Haynes 263은 $Li(Ni,Co)O_2$, $NiCr_2O_4$ 및 $LiTiO_2$, Inconel X-750은 $Cr_2O_3$, $NiFe_2O_4$,$FeNi_3$, (Al,Nb,Ti)$O_2$의 부식생성물을 나타내었다. Haynes 263은 국부부식의 거동을 보이는 반면, Haynes 75, Inconel 718 및 Inconel X-750은 전면 부식 거동을 나타내었다.