• 제목/요약/키워드: Local density

검색결과 1,099건 처리시간 0.035초

Asymptotic Density of Quadratic Forms

  • 최기현
    • 응용통계연구
    • /
    • 제4권2호
    • /
    • pp.149-156
    • /
    • 1991
  • 본 논문에서는 여러 분야에서 중요한 역할을 하는 이차형식의 정확한 밀도함수를 구하는 것 이 어려운 경우에 극소극한정리를 포함하는 문제들에 토레플리트(Toelitz) 형식의 고유값에 대한 점근 이론을 갖고서 이차형식의 점근 밀도함수를 구하였다.

  • PDF

지방자치단체의 지역문화자원 활용 효율성 분석 (An Efficiency Analysis of the Local Cultural Resources Utilization of Local Governments)

  • 강보배
    • 지역과문화
    • /
    • 제6권2호
    • /
    • pp.77-104
    • /
    • 2019
  • 본 연구는 지역 문화 생태계의 전제가 되는 지역문화자원에 대한 지방자치단체의 활용 효율성을 분석하고자 하였다. 이를 위해 자료포락분석(DEA)을 통해 전국 17개 광역시·도의 상대적인 효율성을 측정하였다. 이와 더불어 지역문화자원 환경 관련 산출 변수를 포함하여 '전체 효율성'을 도출하고, 앞서 도출한 '활용 효율성'과 비교하여 지역문화자원 '환경 효율성'이 지자체의 효율성 순위 변동에 미치는 영향을 추정하였다. 분석 결과, 17개 광역시·도 중 5곳의 기초자치단체들이 효율적으로 지역문화자원을 활용한 것으로 평가되었으며, 비효율적인 광역시·도의 기초자치단체들은 순기술효율성 보다 규모의 비효율이 상대적으로 영향을 미치고 있음을 확인하였다. '환경 효율성' 추정 결과, 17개 광역시·도의 '활용 효율성'과 '전체 효율성' 순위가 동일한 곳은 없었으며, '전체 효율성'의 순위 증감을 통해 '환경 효율성'의 영향을 확인하였다. 지방자치단체의 효율성 차이는 투입 변수에 전제된 인구밀도가 큰 영향을 미치기 때문에, 향후 효율성을 개선하기 위해서는 지역문화자원 활용의 주요 수요자인 지역주민 인구 추계에 따라 투입의 적정 수준을 조절해야 할 필요가 있다. 더불어 현재 지방자치단체에서 개최하고 있는 지역축제, 마을축제의 점검을 통해 비효율적인 부분을 제거하여 산출량을 질적으로 개선해야 한다. 또한 지방자치단체의 지역문화자원 효율성을 분석하고자 할 때, 환경적 산출 요인의 고려가 함께 충분히 이루어져야 한다.

다목적 실용위성 1호로 측정한 저위도 상부 이온층의 전자 온도와 전자 밀도의 경도 및 계절별 변화 (LONGITUDINAL AND SEASONAL VARIATIONS OF THE ELECTRON TEMPERATURE AND DENSITY IN THE LOW_LATITUDE TOPSIDE IONOSPHERE OBSERVED BY KOMPSAT-1)

  • 김희준;박선미;이재진;이은상;민경욱;한원용;남욱원;진호
    • Journal of Astronomy and Space Sciences
    • /
    • 제19권2호
    • /
    • pp.123-132
    • /
    • 2002
  • 다목적 실용위성 1호는 고도 685km, $98^{\circ}$의 궤도 경사각를 가지며, 탑재된 이온층 측정 센서(Ionospheric Measurement Sensor)로 전자 온도와 전자 밀도를 측정하였다. 이 관측 자료로부터 22:50LT인 밤 시간에 $+60^{\circ}~-60^{\circ}$의 저위도 지역에서 자기적으로 안정한 상태(Kp <4)의 계절별 전자 밀도와 전자 온도의 분포를 구하였다. 관측 결과, 전자 온도와 전자 밀도의 분포는 계절과 경도에 따라 변화를 나타냈다. 대체로 전자 밀도는 자기 적도 부근에서 높아지고, 전자 온도는 낮아지는 경향을 보였다. 봄, 가을에는 전자 밀도와 온도 모두 자기 적도를 중심으로 대칭적으로 분포하였다. 그러나 여름에는 전체적으로 북반구 쪽으로 이동하여 전자 밀도의 극대점과 전자 온도의 극소점이 자기 적도 북쪽에 위치하였고, 겨울에는 이와 반대의 변화를 나타냈다. 또한, 각 계절에서 경도에 따라서도 전자 온도와 밀도 분포의 차이를 보였다. 이러한 차이가 생기는 원인은 경도와 계절에 따라 달라지는 F층의 중성 바람이 이온층 플라즈마에 영향을 주는 것에 의해 설명될 수 있다. 이 관측에서 얻은 전자온도와 밀도의 분포는 IRI95모델을 이용해 구한 분포와 차이를 보였다.

벼 육묘상자를 이용한 돌나물 재배에서 삽식밀도에 따른 생육 및 수량 (Growth and Yield of Sedum sarmentosum as Affected by Planting Density in Cultivation System Using a Rice Nursery Tray)

  • 김효진;이승엽
    • 한국작물학회지
    • /
    • 제53권2호
    • /
    • pp.196-202
    • /
    • 2008
  • 무가온 하우스에서 벼 육묘상자($30{\times}60{\times}3\;cm$)를 이용한 고품질 돌나물 생산체계를 확립하기 위하여, 완주 및 금산지역종을 재료로 육모상자당 40, 60, 80개체씩 9월7일에 삽식한 다음, 월동전후 두 지역종간 생육특성과 수량성을 조사하였다. 삽식후 60일째에 초장과 줄기수는 삽식밀도 간에 유의한 차이를 보이지 않았으나, 두 지역종의 잎장과 식물체 당 곁가지 수는 40개체보다 80개체 밀식에서 유의한 감소를 보였다. 월동후 1차 수확시(4월 20일), 금산 지역종의 생육은 삽식밀도간 차이가 없었으나, 완주 지역종의 줄기직경, 줄기당 마디수와 잎수 등은 40개체 삽십보다 80개체 삽식에서 유의한 감소를 보였다. 생체중과 건물중은 두 계통 모두 삽식밀도간 차이가 없었으나, 완주지역종에서 유의한 증가를 보였다. 2차 수확시(6월 5일)의 생육은 두 지역종 모두 총 줄기수에서만 40개체 삽십보다 80개체 삽식에서 유의한 증가를 보였다. 생체중과 건물중은 금산 지역종에서 40개체 삽십보다 60개체 삽식에서 유의하게 증가하였고, 완주 지역종의 건물중이 금산 지역종보다 높았다. 완주 지역종은 줄기가 두껍고 마디가 짧으며, 잎이 크고 웃자라지 않아, 수량성이 금산 지역종보다 높았다. 따라서 무가온 하우스에서 벼 육묘상자를 이용한 돌나물 재배시 완주 지역종이 금산 지역종보다 적합하였으며, 재식밀도는 상자당 40개체가 적당하였다.

Galaxy Clusters at High Redshift

  • Im, Myungshin
    • 천문학회보
    • /
    • 제40권1호
    • /
    • pp.41.1-41.1
    • /
    • 2015
  • Hierarchical galaxy formation models under LCDM cosmology predict that the most massive structures such as galaxy clusters (M > $10^{14}M_{\odot}$) appear late (z < 1) in the history of the universe through hierarchical clustering of small objects. Galaxy formation is also expected to be accelerated in overdense environments, with the star formation rate-density relation to be established at z ~ 2. In this talk, we present our search of massive structures of galaxies at 0.7 < z < 4, using the data from GOODS survey and our own imaging survey, Infrared Medium-deep Survey (IMS). From these studies, we find that there are excess of massive structures of galaxies at z > 2 in comparison to the Millennium simulation data. At 1 < z < 2, the number density of massive structures is consistent with the simulation data, but the star formation history is more or less identical between field and cluster. The star formation quenching process is dominated by internal process (stellar mass). The environmental effect becomes important only at z < 1, which contributes to create the well known star formation-density relation in the local universe. Our results suggest that galaxy formation models under LCDM cosmology may require further refinements to match the observation.

  • PDF

Density Functional Theory for Calculating the OH Stretching Frequency of Water Molecules

  • Jeon, Kiyoung;Yang, Mino
    • 대한화학회지
    • /
    • 제60권6호
    • /
    • pp.410-414
    • /
    • 2016
  • The anharmonic frequency of a local OH stretching mode of a water monomer and dimer was calculated using various levels of density functional theory. The quantum chemical potential energy curves as a function of the OH bond distance were calculated, and they were fitted with the Morse potential function to analytically obtain the fundamental transition frequency. By comparing those values with the frequencies similarly calculated using an ab initio quantum chemical method, the coupled cluster theory including both single and double excitations with the perturbative inclusion of triple excitation in the complete basis limit, the accuracy of various density functional methods in the calculation of anharmonic vibration frequency of water molecules was assessed. For a water monomer, X3LYP and B3LYP methods give the best accuracy, whereas for a water dimer, B972, LCBLYP, ${\omega}B97X$, ${\omega}B97$ methods show the best performance.

스토캐스틱 모델 ( Stochastic Model ) 에 의한 고체입자상 의 산란작용 에 대한 연구 I (A Study for Dispersive Action on The Solid Particle by Stochastic Model (I))

  • 맹주성
    • 대한기계학회논문집
    • /
    • 제6권4호
    • /
    • pp.308-314
    • /
    • 1982
  • An experimental study has been made for the dispersion phenomena by a stochastic model in a turbulent pipe flow. Local instantaneous passage of suspended solid particles were recorded in two dimensions, employing a periscopic system coupled vidicon camera. Probability density of passage was calculated. Second moment shows qualitatively that dispersive action is dependent on particle's geometric characteristics in vertical pipe flow. In case that density of the solid particles is larger than that of liquid, particles have a tendency to approach from the center of pipe to the wall, and in the contrary case the approach the center of pipe. It seems that there exists a field of radial accelerations, centrifugal or centripetal according to the sign of density difference between two phases.

TFT-LCD 영상에서 결함 군집도 특성 기반의 확률밀도함수를 이용한 결함 검출 알고리즘 (Defect Detection algorithm of TFT-LCD Polarizing Film using the Probability Density Function based on Cluster Characteristic)

  • 구은혜;박길흠
    • 한국멀티미디어학회논문지
    • /
    • 제19권3호
    • /
    • pp.633-641
    • /
    • 2016
  • Automatic defect inspection system is composed of the step in the pre-processing, defect candidate detection, and classification. Polarizing films containing various defects should be minimized over-detection for classifying defect blobs. In this paper, we propose a defect detection algorithm using a skewness of histogram for minimizing over-detection. In order to detect up defects with similar to background pixel, we are used the characteristics of the local region. And the real defect pixels are distinguished from the noise using the probability density function. Experimental results demonstrated the minimized over-detection by utilizing the artificial images and real polarizing film images.

직병렬 유도결합형 안테나를 이용한 대면적 플라즈마 소스 연구

  • 김봉주;이승걸;오범환;이일항;박세근
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
    • /
    • pp.201-204
    • /
    • 2002
  • A large area inductively coupled plasma which is applicable to LCD processing is built with a modified single loop RF antenna. Combination of parallel and series paths of RF current through the antenna induces local enhancement of plasma density, which in turn provides uniform plasma density near the substrate. The plasma density distribution is measured and compared with that of the conventional single loop antenna. Aisotropic etching of photoresist is performed, and it is found that etch uniformity is improved by 3% from 15% of the conventional etcher over 350$\times$300mm glass substrates. Photoresist etching rate and uniformity can be further improved by applying a periodic weak axial magnetic fieid.

  • PDF