• Steel and Composite Structures
• /
• 제29권3호
• /
• pp.379-389
• /
• 2018

In this research, the explicit closed-form local buckling solution of steel plates in contact with concrete, with both loaded and unloaded edges elastically restrained against rotation and subjected to eccentric compression is presented. The Rayleigh-Rize approach is applied to establish the eigenvalue problem for the local buckling performance. Buckling shape which combines trigonometric and biquadratic functions is introduced according to that used by Qin et al. (2017) on steel plate buckling under uniform compression. Explicit solutions for predicting the local buckling stress of steel plate are obtained in terms of the rotational stiffness. Based on different boundary conditions, simply yet explicit local buckling solutions are discussed in details. The proposed formulas are validated against previous research and finite element results. The influences of the loading stress gradient parameter, the aspect ratio, and the rotational stiffness on the local buckling stress resultants of steel plates with different boundary conditions were evaluated. This work can be considered as an alternative to apply a different buckling shape function to study the buckling problem of steel plate under eccentric compression comparing to the work by Qin et al. (2018), and the results are found to be in consistent with those in Qin et al. (2018).

• Toxicological Research
• /
• 제14권3호
• /
• pp.393-400
• /
• 1998

As a series of safety studies on DA-3585, a recombinant human erythropoietin, its local irritancy was examined in rabbits after the following treatments; application into the conjunctival sac of the eye(single), subcutaneous injection (single and -day repeated)and intravenous injection (7-day repeated.)In addition, perivascular irritation of DA-3585 was investigated in mice. In the result of ocular irritation test, 10,000IU/ml solution of DA-3585 could be considered as a non-irritating material. The local irritation of DA-3585 by a single and 7-day repeated subcutaneous injection was negligible and not so much different from that of saline. In the vascular irritancy test, macro-and microscopic observations revealed that local irritation of DA-3585 was comparable to that of saline when injected into retroauricular vein of rabbits for 7 consecutive days. Furthermore the perivascular administration of DA-3585 upto the concentration of 10,000 IU/ml did not induce any morphological abnormalities at injection sites. The results obtained from the present study suggest that the local irritancy of DA-3585 is not different from that of saline when injected through intravenous or subcutaneous route for clinical practice.

• Archives of Plastic Surgery
• /
• 제37권6호
• /
• pp.795-800
• /
• 2010

Purpose: According to various medical publications, it is believed that epinephrine should not be injected in fingers. However numerous articles show the successful use of local anesthetic with epinephrine in the digits. Epinephrine-mixed lidocaine solution enables to maintain a bloodless field for operation and provides long duration of local anesthesia when patient was wide awake. Methods: From May 2009 to December 2009, ten patients underwent flexor tendon reconstruction with local anesthesia using epinephrine. No tourniquet was necessary. Before operation, all patients were injected with local anesthetics using 1% lidocaine 20 mL and 0.1% epinephrine 0.1 mL. Results: There was no case of digital necrosis nor gangrene in the epinephrine injection. All 10 patients actively could move the finger through a full range of motion. All procedures were performed without sedation nor tourniquet and we could obtain a good vision of operative field and patients were comfortable. The patient make his or her fingers move through a full range of active motion before the skin is closed. Phentolamine was not required to reverse the vasoconstriction in any patients. Conclusion: The assertation that epinephrine should not be injected into the fingers is clearly no longer valid. The epinephrine injection allowed the authors to adjust flexor tendon surgery without risks associated with general anesthesia. It also enables to ensure longer anesthetic duration and bloodless operative field, and prevent post operative complications. In case of flexor tendon surgery, the use of epinephrine injection is recommended because of the advantages of local anesthesia.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권6호
• /
• pp.507-525
• /
• 2021

Local anesthesia is indispensable in dentistry. Worldwide, millions of local anesthetic injections are administered annually, and are generally considered safe invasive procedures. However, adverse effects are possible, of which dentists should be aware of. This scoping review aimed to provide an extensive overview of the reported literature on the adverse effects of dental local anesthesia. The types of papers, what is reported, and how they are reported were reviewed. Additionally, the incidence and duration of adverse effects and factors influencing their occurrence were also reviewed. An electronic search for relevant articles was performed in PubMed and Embase databases from inception to January 2, 2020. The titles and abstracts were independently screened by two reviewers. The analysis was narrative, and no meta-analysis was performed. This study included 78 articles. Ocular and neurological adverse effects, allergies, hematomas, needle breakage, tissue necrosis, blanching, jaw ankylosis, osteomyelitis, and isolated atrial fibrillation have been described. Multiple adverse effects of dental local anesthesia have been reported in the literature. The results were heterogeneous, and detailed descriptions of the related procedures were lacking. Vital information concerning adverse effects, such as the dosage or type of anesthetic solution, or the type of needle used, was frequently missing. Therefore, high-quality research on this topic is needed. Finally, the adverse effects that are rarely encountered in real-world general practice are overrepresented in the literature.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.120-126
• /
• 1991

본 연구에서는 Kawabata가 제안한 직접수치해법(direct numerical solution method)을 확대하여 윤활표면으 국부 회소가스 효과(local rarefaction effect)로 인 한 공기분자의 벽면 미끄름 현상을 고려한 지배방정식을 Navier-Stokes방정식으로 부 터 유도하고 이를 2차원 유동의 경우까지 확대하여 극소틈새와 높은 압축성 계수를 갖 는 경우에 적용하고 그 결과를 기존의 수정된 레이노래즈 방정식의 해석결과와 비교하 고자 한다.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1428-1436
• /
• 2000

The absorption of vapor involves simultaneous heat and mass transfer in the vapor/liquid system. In this paper, a numerical study for vapor absorption process into LIBr-H$_2$O solution film flowing over helical absorber has been carried out. Axisymmetric cylindrical coordinate system was adopted to model the helical tube and the transport equations were solved by the finite volume method. The effects of operating conditions, such as the cooling water temperature. the system pressure, the film Reynolds number and the solution inlet concentration have been investigated in view of the absorption mass flux and the total absorption mass flux and the total absorption rate. The results for the temperature and concentration profiles, as well as the local absorption mass flux at the helical absorber are presented. It is shown that solution inlet concentration affected other than operation conditions for a mass flux.

• Journal of Welding and Joining
• /
• 제22권2호
• /
• pp.59-68
• /
• 2004

Plasma transferred arc welding (PTAW) has been taken into consideration for repairing Ni-based superalloy components used gas turbine blades. Various cracks has been generally reported to be found in the base metal heat affected zone(HAZ) along grain boundary. Thus, hot cracking susceptibility of Ni-based superalloys was evaluated according to heat treatments. Hot ductility test was conducted on specimens with solution treated at 112$0^{\circ}C$ for 2 hours and aging treated at 845$^{\circ}C$ for 24hours after solution treatment. The results of the hot ductility test appeared that solution treated specimens were the highest ductility recovery rate among three conditions. The loss of ductility at high temperature in Ni-based superalloy was mainly controlled by the degree of pain boundary wetting due to constitutional liquation of MC carbide precipitates. Meanwhile, the highest ductility recovery rate in solution-treated alloys seems to be lack of M23C6, which can be dissolved during heating and then result in the local enrichment of Cr in the vicinity of the grain boundary.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3015-3020
• /
• 2014

The behavior of benzo[a]pyrene-7,8-dione (BPQ) in aqueous solution and its interaction with native DNA was investigated using conventional absorption and linear dichroism (LD) spectroscopy. The appearance of a broad absorption maximum at long wavelengths and its proportional relationship to solvent polarizability suggested that BPQ adopts a aggregated state for all solutions examined. Disappearance of this absorption band at higher temperatures in aqueous solution also supported BPQ aggregation. When associated with DNA absorption spectral properties were essentially the same as that in aqueous solution. However, two isosbestic wavelengths were found in the concentration-dependent absorption spectrum of the BPQ-DNA complex, suggesting the presence of at least two or more DNA-bound BPQ species. Both species produced $LD^r$ spectra whose magnitude in BPQ absorption region is larger or comparable to that in the DNA absorption region, suggesting that the molecular BPQ plane is near perpendicular relative to the local DNA helical axis. Therefore, BPQ molecules are aligned along the DNA stem in both DNA-aggregated BPQ species.

• 한국세라믹학회지
• /
• 제12권1호
• /
• pp.16-22
• /
• 1975

The network structure of a glass is known to be cracked by a chemical reaction, diffusion, and ion exchange of alkali ion, formed at the crack tip of the glass surface, when water is present on the glass surface. Since the durability of glass is reduced, due to the fatigue phenomenon mentioned above, pollution problem of glass goods, especially bottle glass, is becoming acute gradually. A static fatigue phenomenon was studied thermodynamically in this paper, and a mechanism of static fatigue, a quality control, and a method of preventing pollution for the main local glass goods were also investigated. The PH of reacted solution and the quantity of extracted alkali were measured at different conditions such as temperature, reacting time, particle size of a crushed glass sample, and the nature of reacting solution. The enthalpy change was calculated from the Arrhenius equation. The results are given below; 1) The absolute value of enthalpy change for the bottle glass was found to be higher than the for the flat glass. 2) The fatigue phenomenon of a glass was more sensitive to the temperature than to the reacting time. 3) The durability of glass in acid solution is stronger than in alkaline solution. 4) The substance which cracks the network structure of glas is considered the hydroxyl ion.

• 유통과학연구
• /
• 제10권11호
• /
• pp.61-70
• /
• 2012

Purpose - The entry of Super Supermarkets (SSM), operated by large corporations, into the retail distribution market weakens the competitive power of local supermarkets (SM) and their families leading to a rapid collapse of the local-SM market. Accordingly, this is a very sensitive and urgent issue in Korean society and politics. Therefore, the government is required to take steps to activate a local-SM market and regain the loyalty of their customers. However, in spite of the urgent need of a comparative study on the advantages and competitive power of local-SM in relation to the SSM, little research has been done on this issue to date. One purpose of this study is to analyze the differences in store characteristics of the local SM and SSM, and to explore the relationships amongst various store characteristics, such as consumption emotion, relation quality, and store loyalty between store types to provide an efficient solution to activate a local-SM market. Research design, data, methodology - To analyze the differences in the evaluation of store characteristics between store types, and to test the moderator and mediator effects, data were collected from 488 customers in Seoul, Incheon,and Gyeonggi Province. The theoretical model consists of four hypotheses, and data was processed to test these using factor analysis, t-test, regression analysis, hierarchical regression, and the three step regression proposed by Baron and Kenny. Results - First, the analysis shows that local-SM customers evaluate location characteristic factors significantly higher compared to SSM customers. However, SSM customers evaluate quality of merchandise, sales promotion activities, and store environment significantly higher. Yet, there are no significant differences in the evaluation of consumption emotion, relation quality,and store loyalty between the store types. Second, the analysis of moderator effects of the store type show that sales promotion and store atmosphere factors have a significantly negative moderating effecton positive consumption emotion, while positive consumption emotion has a significantly positive moderating effect on absorption of relation quality, while there are no significant moderating effects between consumption emotion and store loyalty. Third, while both trust and absorption of relation quality are partially mediated between consumption emotion and store loyalty, only absorption is partially mediated between positive consumption emotion and store loyalty. There are no significant mediating effects of absorption between negative consumption emotion and store loyalty. Conclusions - We strongly recommend that location restrictions on entrance of SSM into local-SM market should either be further strengthened or sustained for the activation of the local store market. Government should strengthen financial support to improve the quality of merchandise, sales promotion, employee education, store environment of the local-SM by providing appropriate business consulting. Moreover, the result implies that the owners of alocal-SM should take measures to increase customers' absorption and store loyalty, such as store cleanliness, maintaining a delightful atmosphere at the store, and training employees on attitudes towards customers. As this study is restricted within Seoul, Incheon, and Gyeonggi Province, care needs to be taken in generalizing the interpretation and application to the national level.