• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2337-2346
• /
• 1996

One of the most useful method for increasing combustion loading of premixed flame is to strengthen the turbulent intensity of unburned mixture. It produces an important information to a design of efficient combustion equipment that analysing microstructure of strong turbulence premixed flame. The flame structure and characteristics are depend on the turbulence of unburned mixture. Therefore, to strengthen the turbulent intensity of unburned mixture make flame scale small and accomplish efficient combustion. We measured the velocity of local flame front movements, local eddy radius and local reaction zone thickness quantitatively with increasing turbulent intensity of unburned mixture. We researched the microstructure of flame using ion currents that react sensitively in the reaction zone. Consequently, the velocity of local flame front movements is depend on the velocity of unburned mixture and local eddy scale is to be small with increasing turbulent intensity. But there is no change in local reaction zone thickness with turbulence.

• 한국연소학회지
• /
• 제6권2호
• /
• pp.36-42
• /
• 2001

Usually, we use the flame thickness and turbulence scale to classify the flame structure on a phase diagram of turbulent combustion. The flame structure in turbulence is still in debate, and many studies have been done. Since the flame motion is rapid and its reaction zone thickness is very thin, it is difficult to estimate the flame thickness. Here, we propose a new approach to determine the reaction zone thickness based on ion current signals obtained by an electrostatic probe, which has enough time and space resolution to detect flame fluctuation. Since the signal depends on the flow condition and flame curvature, it may be difficult to analyze directly these signals and examine the flame characteristics. However, ion concentration is high only in the region where hydrocarbon-oxygen reactions occur, and we can specify the reaction zone. Based on the reaction zone existing, we estimate the reaction zone thickness. We obtain the thickness of flames both in the cyclone-jet combustor and on a Bunsen burner, compared with theoretically predicted value, the Zeldovich thickness. Results show that the experimentally obtained thickness is almost the same as the Zeldovich thickness. It is concluded that this approach can be used to obtain the local flame structure for modeling turbulent combustion.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1813-1821
• /
• 2004

Until now, the 40% of wall thickness criterion, which is generally used for the plugging of steam generator tubes, has been applied only to a single cracked geometry. In the previous study by the authors, a total number of 9 local failure prediction models were introduced to estimate the coalescence load of two collinear through-wall cracks and, then, the reaction force model and plastic zone contact model were selected as the optimum ones. The objective of this study is to estimate the coalescence load of two collinear through-wall cracks in steam generator tube by using the optimum local failure prediction models. In order to investigate the applicability of the optimum local failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two collinear through-wall cracks in steam generator tube were carried out. Thereby, the applicability of the optimum local failure prediction models was verified and, finally, a coalescence evaluation diagram which can be used to determine whether the adjacent cracks detected by NDE coalesce or not has been developed.

• The Journal of Korean Physical Therapy
• /
• 제19권1호
• /
• pp.67-78
• /
• 2007

Purpose: The purpose of this study were to examine the anti-hyperalgesic effects of combination of electroacupuncture and microcurrent on anti-hyperalgesia in local hyperalgesia zone. Methods: It used 24 rats for experiment, divided them into control group, electroacupuncture group (EA group), microcurrent group (MC group), combination of electroacupuncture with microcurrent (EA+MC group), caused hyperalgesia by injecting ${\lambda}-carrageenan$ into hindpaw. Thickness of hindpaw, mechanical pain threshold (MPT), thermal pain threshold (TPT), noxious flexion withdrawal reflex (NFR) and somatosensory evoked potential (SEP) were measured immediately after induction, at 24 hours, 48 hours and 72 hours after induction. The electrical stimulation was given once a day for three days, 20min per session. Results: Change of thickness, MPT, and TPT showed significant difference in all groups compared to control group. In particular, there were remarkable difference in EA+ME group. In particular there were remarkable differences in EA group and EA+MC group. Change of NFR(% threshold, % reaction time, % RMS) and SEP showed mainly significant differences in EA group and EA+ME group compared to control group. In particular, there were remarkable difference in EA+ME group. Conclusion: The above results suggest that appropriate combination of microcurrent with electroacupuncture for pain control will be very desirable.