• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.911-920
• /
• 2005

The present study investigates heat/mass transfer and flow characteristics in a ribbed rotating passage with turning region. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter ($D_h$) of 26.67 mm. Rib turbulators are attached in the parallel arrangement on the leading and trailing surfaces of the passage. The ribs have a rectangular cross section of 2 m (e) $\times$ 3 m (w) and an attack angle of $70^{\circ}$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio (e/$D_h$) is 0.075. The rotation number ranges from 0.0 to 0.20 while the Reynolds number is constant at 10,000. To verify the heat/mass transfer augmentation, internal flow structures are calculated for the same conditions using a commercial code FLUENT 6.1. The results show that a pair of vortex cells are generated due to the symmetric geometry of the rib arrangement, and heat/mass transfer is augmented up to $Sh/Sh_0=2.9$ averagely, which is higher than that of the cross-ribbed case presented in the previous study for the stationary case. With the passage rotation, the main flow in the first-pass deflects toward the trailing surface and the heat transfer is enhanced on the trailing surface. In the second-pass, the flow enlarges the vortex cell close to the leading surface, and the small vortex cell on the trailing surface side contracts to disappear as the passage rotates faster. At the highest rotation number ($R_O=0.20$), the turn-induced single vortex cell becomes identical regardless of the rib configuration so that similar local heat/mass transfer distributions are observed in the fuming region for the cross- and parallel-ribbed case.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.499-504
• /
• 2001

A validation of a 3D CFD model for predicting local subcooling of moderator in the vicinity of calandria tubes in a CANDU reactor is performed. The small scale moderator experiments performed at Sheridan Park Experimental Laboratory(SPEL) in Ontario, Canada[1] is used for the validation. Also a comparison is made between previous CFD analyses based on 2DMOTH and PHOENICS, and the current model analysis for the same SPEL experiment. For the current model, a set of grid structures for the same geometry as the experimental test section is generated and the momentum, heat and continuity equations are solved by CFX-4.3, a CFD code developed by AEA technology. The matrix of calandria tubes is simplified by the porous media approach. The standard $k-\varepsilon$ turbulence model associated with logarithmic wall treatment and SIMPLEC algorithm on the body fitted grid are used and buoyancy effects are accounted for by the Boussinesq approximation. For the test conditions simulated in this study, the flow pattern identified is a buoyancy-dominated flow, which is generated by the interaction between the dominant buoyancy force by heating and inertial momentum forces by the inlet jets. As a result, the current CFD moderator analysis model predicts the moderator temperature reasonably, and the maximum error against the experimental data is kept at less than $2.0^{\circ}C$ over the whole domain. The simulated velocity field matches with the visualization of SPEL experiments quite well.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1595-1603
• /
• 2002

In this paper we have presented the results of diffusion behavior of model systems for eight liquid n-alkanes ($C_{12}$-$C_{44}$) in a canonical (NVT) ensemble at several temperatures using molecular dynamics simulations. For these n-alkanes of small chain length n, the chains are clearly <$R_{ee}^2$>/6<$R_g^2$>>1 and non-Gaussian. This result implies that the liquid n-alkanes over the whole temperatures considered are far away from the Rouse regime, though the ratio becomes close to the unity as n increases. Calculated self-diffusion constants $D_{self}$ are comparable with experimental results and the Arrhenius plot of self-diffusion constants versus inverse temperature shows a different temperature dependence of diffusion on the chain length. The global rotational motion of n-alkanes is examined by characterizing the orientation relaxation of the end-to-end vector and it is found that the ratio ${\tau}1/{\tau}2$ is less than 3, the value expected for a isotropically diffusive rotational process. The friction constants ${\xi}$of the whole molecules of n-alkanes are calculated directly from the force auto-correlation (FAC) functions and compared with the monomeric friction constants ${\xi}_D$ extracted from $D_{self}$. Both the friction constants give a correct qualitative trends: decrease with increasing temperature and increase with increasing chain length. The friction constant calculated from the FAC's decreases very slowly with increasing temperature, while the monomeric friction constant varies rapidly with temperature. By considering the orientation relaxation of local vectors and diffusion of each site, it is found that rotational and translational diffusions of the ends are faster than those of the center.

• The Journal of the Korean bone and joint tumor society
• /
• v.3 no.1
• /
• pp.47-55
• /
• 1997

During the last decade, the use of primary amputation has decreased, and a larger number of patients are being treated with resection and reconstruction with limb preservation. The advantage of chemotherapy, improvements in diagnostic imaging methods and newer techniques for reconstruction have made limb salvage an alternative to amputation for most patients with malignant bone tumor. Clinical results and functional results of the limb salvage operation of bone tumors treated at the Department of Orthopaedic Surgery, Guro Hospital, Korea university was reviewed. Eighteen bone tumors(seven giant cell tumors and eleven malignant bone tumors.) were studied over a period of five years. The limb salvage group included fourteen endoprothesis, two pasteurized autograft, one near total scapulectomy and one rotationplasty. Functional evaluation was performed according to the Enneking's modified system. The results were as followed; 1. At a mean follow-up of thirty two months (15-77 months), fourteen(83%) of the eighteen patients with limb salvage procedures had been continuously disease free. 2. There are no local recurrence but deep infection developed in two patients and three patients with distant metastasis. 3. Thirteen(87%) of the fifteen patients showed above 60% of functional results. 4. Fourteen(93%) of the fifteen patients were satisfied with the limb salvage procedures.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.255-266
• /
• 1999

The objective of this experiment is to observe the elastic and inelastic behaviors of high-rise reinforced concrete frames having non-seismic details. To do this, a building frame designed according to Korean seismic code and detailed in the Korean conventional practice was selected. A 1:12 scale plane frame model was manufactured according to similitude law. A reversed lateral load test and a monotonic pushover test were performed under the displacement control. To simulate the earthquake effects, the lateral force distribution was maintained to be an inverse triangle by using a whiffle tree. From the tests, base shears, crack pattern, local rotations in the ends of critical members and the relations between interstory drift versus story shear are obtained. Based on test results, conclusions are drawn on the implications of the elastic and inelastic behaviors of a high-rise reinforced concrete frame having non-seismic details.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.1085-1114
• /
• 2016

This paper investigates the transverse impact response for ultra lightweight cement composite (ULCC) filled pipe-in-pipe structures through a parametric study using both a validated finite element procedure and a validated theoretical model. The parametric study explores the effect of the impact loading conditions (including the impact velocity and the indenter shape), the geometric properties (including the pipe length and the dimensions of the three material layers) as well as the material properties (including the material properties of the steel pipes and the filler materials) on the impact response of the pipe-in-pipe composite structures. The global impact responses predicted by the FE procedure and by the theoretical model agree with each other closely. The parametric study using the theoretical approach indicates the close relationships among the global impact responses (including the maximum impact force and the maximum global displacement) in specimens with the equivalent thicknesses, proposed in the theoretical model, for the pipe-in-pipe composite structures. In the pipe-in-pipe composite structure, the inner steel pipe, together with the outer steel pipe, imposes a strong confinement on the infilled cement composite and enhances significantly the composite action, leading to improved impact resistance, small global and local deformations.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.1013-1032
• /
• 2000

At present, the scale of Electronic Commerce through internet has been rapidly increasing due to the development of information & communication technology, and aggregated to 2.4 billion dollar in America last year (1998). The market scale of worldwide electronic commerce is also presumed to be about 130 billion dollar in 2000, and to occupy more than 20% of the whole world trade in world 2020. Since the right of trademark, despite of being effective only in registered nations on the principle of territorialism, is unified on the cyber space of internet without domestic barrier or local limitation which make it easier to conduct the distribution of information rapidly through the address-internet domain name, those are very important that the systematic dispute-solving plan on problems such as decision of its Act and international jurisdiction to be established, in an effort to prevent the newly emerging dispute instances such as trademark infringement and improper competitiveness. In addition, it is natural that on the threshold of the electronic commerce age which formed with an unified area without the worldwide specific regulation, each country including us makes haste with the enactment of "electronic commerce Act" aiming at coming into force in 1999, in keeping with getting through "non-tariff law on electronic commerce" by U. S. parliament on May, 1998. In view of the properties of electronic commerce transactions through internet, there are the large curtailment of distributive channel, surmounting of restrictions on transaction area, space and time and the easy feedback with consumer and the cheap-required capital, from which the problems may arise - registration of trademark, the trademark infringement of domain name and the protection of prestigious trademark. Therefore, it is necessary to take the counter-measure, with a view of reviewing the infringement of trademark and domain name and the instances of each national precedent and to preventing the disputes. The improvement of the persistent system should be needed to propel the harmonious protection of those holding trademark right's credit and demanders' expectant profit by way of the righteous use of trademark.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.2
• /
• pp.139-158
• /
• 2017

CMAQ (Community Multiscale Air Quality Model) simulations were carried out to estimate the potential range of contributions on surface $PM_{2.5}$ concentrations over the Seoul Metropolitan Area (SMA) with the gaseous precursors and Primary Particulate Matters(PPM) available from a recent national emissions inventory. In detail, on top of a base simulation utilizing the 2013 Clean Air Policy Supporting System (CAPSS) emission inventory, a set of Brute Force Method (BFM) simulations after reducing anthropogenic $NO_x$, $SO_2$, $NH_3$, VOCs, and PPM emissions released from area, mobile, and point sources in SMA by 50% were performed in turn. Modeling results show that zero-out contributions(ZOC) of $NH_3$ and PPM emissions from SMA are as high as $4{\sim}5{\mu}g/m^3$ over the region during the modeling period. On the contrary, ZOC of local $NO_x$ and $SO_2$ emissions to SMA $PM_{2.5}$ are less than $1{\mu}g/m^3$. Moreover, model analyses indicate that a wintertime $NO_x$ reduction at least up to 50% increases SMA $PM_{2.5}$ concentrations, probably due to increased HNO3 formation and conversion to aerosols under more abundant ozone and radical conditions after the $NO_x$ reduction. However, a nation-wide $NO_x$ reduction decreased SMA $PM_{2.5}$ concentrations even during winter, which implies that nation-wide reductions would be more effective to curtail SMA $PM_{2.5}$ concentrations than localized efforts.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1119-1133
• /
• 2013

These days there is a flow of support for returning to design and handcraft, and the arts and crafts ideas of William Morris have an influence until the present over periods. The semanticity and methodology of guild production method supported by William Morris is studied. The foundation that human is in beautiful harmony with nature is on free labor and artistic life. In the organic relationship, the decline of art is understood as general crisis of culture, and human living condition should be changed in order to rouse the human sense of beauty and comprehension of art. Once human labor becomes artistic, the consumption living and local living become artistic as well. And then consumers desire more artistic works, structures, or urban spaces, and the demands for those move artificers to go toward producing more artistic works and structures. That is, the course of succession of art and culture through living is the driving force of social progress. Even if the period when Morris lived and the present are very different, this paper will shows that a large amount of art and culture will be greatly developed in twenty-first century which is 'the period led by cultural consumers', and the people directly creating art works will be also increased at the same time, as Alvin Toffler suggested. Furthermore, we can aware through this paper that such the people will rule the world. Finally it reached the period that we must face to 'making artistic life' as Morris expected a century ago. According to the result of this paper, we realized the study about Morris will contribute greatly to improve the quality of human life.