• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.9-16
• /
• 2005

The purpose of this study is to investigate the settlement characteristics of large drilled shafts embedded into bed rocks. To perform this research, 35 pile load test results for the large drilled shafts are used, because these deep foundations generally used as substructure systems for grand bridges. In case of the yield load can not be easily determined by load(P)-settlement(S) curve from the pile load test at the maximum loads, the standard settlements which can determine a yield load is established. The residual settlement equation of pile embedded in gneiss and igneous rocks is presented in this study. Also a equation is proposed to characterize the relationship between loads and elastic settlements in pile load tests on the large drilled shaft embedded into bedrock. Then, large drilled shaft's settlement characteristics are examined on pile length, pile diameter and pile's socked depth into rock at the pile tip.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.605-610
• /
• 2002

Waste body settlement is an important aspect of management of landfill sites both during the operational and the post-closure phases. Settlement in landfill waste is caused by combination of load, creep and biodegradation induced effects. In this paper, settlement characteristics of closed waste landfill were studied by analyzing in situ measured data and computer simulation technique. Techniques for the analysis of load-induced and creep settlement, and for their implementation, can be adapted for landfill waste. The estimate of settlements from models shows a increase according to time.

• 한국지반공학회지:지반
• /
• 제13권6호
• /
• pp.61-70
• /
• 1997

매입말뚝공법으로 시공된 말뚝의 거동은 항타말뚝의 그것과는 다르고 또한 여기서 얻어지는 하중-침하량 곡선의 특성도 다름에도 불구하고 이에 대한 기본적인 고찰없이 항타공법에서 적용해 왔던 허용하중 결정방법을 그대로 매입말뚝공법에도 준용하고 있다. 국내의 관련기준에 의하면 허용지지력을 결정하는 방법들이 기준마다 서로 다르고 또한 적용 안전율도 차이가 있어 서로 상충되는 면이 있다. 본 논문에서는 106개 말뚝의 정재하시험을 통해 얻어진 하중-침하량 곡선을 분석하고 이들 결과를 공법별로 비교하였다. 분석결과 일정한 곡선을 기준하여 제시된 각종의 수학적 기법들은 허용지지력을 결정하기 위한 적절한 방법이 아님을 알 수 있었다. 또한 분석결과를 바탕으로 적절한 허용하중 판정방법 및 적용안전율을 제안하였다.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.449-461
• /
• 2018

The load sharing ratio (${\alpha}_{pr}$) of piles is one of the most common problems in the preliminary design of piled raft foundations. A series of 3D numerical analysis are conducted so that special attentions are given to load sharing characteristics under varying conditions, such as pile configuration, pile diameter, pile length, raft thickness, and settlement level. Based on the 3D FE analysis, influencing factors on load sharing behavior of piled raft are investigated. As a result, it is shown that the load sharing ratio of piled raft decreases with increasing settlement level. The load sharing ratio is not only highly dependent on the system geometries of the foundation but also on the settlement level. Based on the results of parametric studies, the load sharing ratio is proposed as a function of the various influencing factors. In addition, the parametric analyses suggest that the load sharing ratios to minimize the differential settlement of piled raft are ranging from 15 to 48% for friction pile and from 15 to 54% for end-bearing pile. The recommendations can provide a basis for an optimum design that would be applicable to piled rafts taking into account the load sharing characteristics.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.106-116
• /
• 1989

This study aims at scrutinizing the long4errn consolidation characteristics of peats sampled at three different regions of Chonbuk province. The standard consolidation test and the single load consolidation test were performed about these samples and especially in case of the latter the loading period was 350 days. The main condusions analyzed are as follows. 1. Void ratio showed much greater values than that of the general clay and was decresed greatly according to the increase of the load. 2. In case of the relationship between the sefflement and the long-term settlement time the rate of settlement increment became great according to the increase of the load step and the long4erm settlement became linely proportional to the logarithm of time alter 10 minutes. 3. The linear correlation was showed between the long4erm settlement time and the void ratio and therefore equations by regression analysis were derived in order to estimate the long-term settlement The slope of straight lines increased according th the increase of the load step and secondary consolidation coefficients ranged from 0.04-0.27. 4. The secondary consolidation coeffcient became linealy proportional to the compression index and the ratio of Ca to CC was 0.072. 5. The period required in ending the primary consolidation was about 10 minutes and alter that the secondary consolidation coefficient appeared to have constant value. Therefore the secondary consolidation coefficient was judged to be used as a significant factor in estimating the long4erm settlement. 6. In case of the single load consolidation test the secondary consolidation coefficient showed the tendancy increasing according to the increase of the consolidation pressure.

• 한국지반공학회논문집
• /
• 제21권5호
• /
• pp.111-122
• /
• 2005

암반에 근입된 대구경 현장타설말뚝에 대한 하중-침하량 특성을 조사하기 위하여 35개소에서 실시된 말뚝재하시험 결과를 분석하였다. 일반적으로 단단한 암반에 근입된 대구경 현장타설말뚝의 침하량은 대단히 미소하여 말뚝의 설계 시방서상에 제시된 말뚝의 전체침하량이나 잔류침하량에 대한 규정을 적용하여 극한하중을 결정할 수가 없다. 따라서 암반에 근입된 대구경 현장타설말뚝의 항복하중을 결정하기 위하여 항타말뚝을 대상으로 이전에 제시된 P-logS분석법을 적용하여 보았다. 적용결과, 이 방법은 기존의 다른 분석법인 P-S, logP-logS, S-logt 및 P-S분석법에 비하여 항복하중결정이 비교적 간편하고 정확하였다. 그리고 암반에 근입된 대구경 현장타설말뚝의 하중이 항복하중에 도달하기 전까지의 말뚝의 하중-침하량 관계를 나타낼 수 있는 회귀분석식이 제시되었다. 또한, 지지층의 종류와 암반 근입심도에 따른 말뚝의 침하거동특성도 조사하였다. 끝으로 현장말뚝재하시험결과에 대한 고찰을 통하여 암반에 근입된 현장타설말뚝의 항복하중을 결정할 수 있는 새로운 침하량 기준값이 제시되었다.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.155-164
• /
• 2020

In recent years, the stability, safety and comfort of trains has received increased attention. The mechanical characteristics and differential settlement of the foundation are the main problems studied in high-speed railway research. The mechanical characteristics and differential settlement of the foundation are greatly affected by the ground treatment. Additionally, the effects of train load and earthquakes have a great impact. The dynamic action of the train will increase the vibration acceleration of the foundation and increase the cumulative deformation, and the earthquake action will affect the stability of the substructure. Earthquakes have an important practical significance for the dynamic analysis of the railway operation stage; therefore, considering the impact of earthquakes on the railway substructure stability has engineering significance. In this paper, finite element model of the CFG (Cement Fly-ash Gravel) pile + cement-soil compacted pile about composite foundation is established, and manual numerical incentive method is selected as the simulation principle. The mechanical characteristics and differential settlement of CFG pile + cement-soil compacted pile about composite foundation under train load are studied. The results show: under the train load, the neutral point of the side friction about CFG pile is located at nearly 7/8 of the pile length; the vertical dynamic stress-time history curves of the cement-soil compacted pile, CFG pile and soil between piles are all regular serrated shape, the vertical dynamic stress of CFG pile changes greatly, but the vertical dynamic stress of cement-soil compacted pile and soil between piles does not change much; the vertical displacement of CFG pile, cement-soil compacted pile and soil between piles change very little.

• 한국지반공학회논문집
• /
• 제28권11호
• /
• pp.33-40
• /
• 2012

말뚝과 raft의 하중 분담 효과를 고려한 Piled Raft 기초의 설계는, 말뚝의 지지력만을 고려하여 설계하는 기존의 말뚝기초 설계 방식에 비해 경제적인 설계를 가능하게 해준다. 일반적으로 Piled Raft 기초 거동의 해석 및 설계는, 해석의 복잡성으로 인해 주로 컴퓨터를 이용한 수치 해석을 이용하고 있으며, 하중 분담 효과에 대한 해석 또한 개별적 상황에 따른 수치해석의 결과로 이루어진다. 본 연구에서는 기초 요소의 하중-침하 특성을 고려하여 Piled Raft 기초에서의 수직하중에 대한 raft와 말뚝의 하중 분담 효과를 평가할 수 있는 모델을 제안하고자 하였다. 기초의 비선형적 거동을 고려하여 말뚝과 raft의 거동을 각각 쌍곡선(hyperbolic curve) 형태의 정규화된 하중-침하 곡선(normalized load-settlement curve)으로 표현하고, 이를 통해 기초의 침하에 따른 말뚝과 raft의 하중 분담 정도를 평가할 수 있는 모델을 제시하였다. 또한 제시한 모델의 적용성을 평가하기 위하여 Piled Raft 기초에 대한 원심모형실험 결과와 비교하였다. 그 결과, 제시한 모델과 원심모형실험 결과로부터 나타난 침하에 따른 하중 분담률의 변화 양상이 전체적으로 유사한 형태를 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.350-357
• /
• 2002

The scale effect should be considered to determine the bearing capacity and settlement of footings from Plate-Load Test, because of the size difference between a footing and a loading plate. To analyze characteristics of bearing capacity and settlement according to the difference of loading plate sizes, model tests were peformed with four different sizes of square plate, which is B=10, 15, 20 and 25cm respectively, on five different kinds of subsoil, which is pure sand(100:0), sand-clay mixed soil(75:25, 50:50, 25:75), and pure clay(0:100). Based on the analyzed results, this paper also proposed a method of bearing capacity and settlement determination, where scale effect is considered depending on the mixing ratio of sand and clay. Applying the formular proposed in this research to field problems, it is expected that evaluation of bearing capacity and settlement of footings can be more reliable and more economic construction can be achieved.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.366-373
• /
• 2002

This paper describes the load distribution and settlement of rockbolted-drilled shafts subjected to axial and lateral loads with the view to shortening the embedded depth of the pile shaft. The emphasis was on quantifying the reinforcing effects of rockbolts placed from the shafts to surrounding weathered rocks based on small-scale model tests peformed on instrumented piles. The major influencing parameters on reinforcing drilled shaft behavior are the number, the positions on the shaft, the grade, and the inclination angle at which the rockbolts are placed. The model tests was 1/40 scaled simulations of the behavior of the drilled shafts with varying combinations of the major influencing parameters. The incremental effects of reinforcement based on the various parameters have been weighed against load transfer characteristics before and after rockbolt installations.