• 제목/요약/키워드: Load reduction factor

검색결과 234건 처리시간 0.028초

스마트 건설기반의 강봉앵커 수동저항 효과를 고려한 단기 안전율 (The Short-term Safety Factor Considering Passive Resistance Effect of Bar Anchor Based on Smart Construction)

  • 이동혁;백두현
    • 한국지반환경공학회 논문집
    • /
    • 제25권4호
    • /
    • pp.29-35
    • /
    • 2024
  • 본 연구는 강봉앵커의 프리스트레스 도입 전 수동저항 효과를 확인하기 위한 해석적 연구이다. 영구앵커로 강봉을 사용하는 경우 두부 하중 재하 전에도 비탈면 내 변위 발생 시 강봉, 그라우트, 주변 지반사이 상호작용에 따른 수동저항효과로 변위가 억제된다. 이에 실제 강봉앵커가 적용된 현장을 대상으로 한계평형해석 및 유한요소해석을 이용하여 파괴면의 형상 및 안전율 변화를 검토하였다. 검토결과, 강봉앵커가 보강된 비탈면의 안전율은 유한요소해석결과 2.02이며, 한계평형해석결과 2.14에 비해 약 5.9% 작게 발생하였고 활동면의 위치도 더 깊게 발생하였다. 이는 보강 전 비탈면에 비해 안전율이 한계평형해석은 163%, 유한요소법은 153% 증가된 것이다. 또한, 최대발생 변위는 비탈면 내 하부 무보강구간에서 발생하였으며, 강봉앵커가 설치된 위치에서는 변위가 42~83% 감소되는 것으로 나타났다.

처리기술에 근거한 산업폐수 배출허용기준 국내 적용성 연구(II) : 산업폐수 위해성 지표를 이용한 오염부하 기여도 분석 (Assessment of Technology Based Industrial Wastewater Effluent Limitation and Standards for the Application of Domestic Industries (II) : Analysis Pollution Loads Contribution by Risk Assessment Indicator in Industrial Wastewater)

  • 김경진;김원기;정상구;정진영;김재훈;김상훈;염익태
    • 한국물환경학회지
    • /
    • 제26권2호
    • /
    • pp.191-199
    • /
    • 2010
  • Introduction of Technology-Based Effluent Limitations (TBELs) concepts into Korea requires extensive and through analyses on the expected pollutants reduction effects and the cost factor for the industry side. In addition, the TEBLs should be optimized for the regulatory environments of Korea and be applied in a progressive manner to minimize the undesirable effects. It is also necessary to assess the contribution of each industrial categories's to the pollution of natural water bodies to find the priority of TEBLs application. For these purposes, the pollution loads of various industrial categories were analyzed using risk assessment indicator based on Toxic Weighting Factors (TWFs). First, the TWFs were calculated for the pollutants regulated using the method adopted by USEPA. And the effluent characteristics of the eighty two categories of industry in Korea were investigated. Although the analytical data on the wastewater from different industrial categories are relatively limited, the results from two previous studies were used. The first study, conducted by the National Institute of Environmental Research in 2001~2004, investigated the wastewater characteristics from 255 industrial sources covering the major 20 industrial categories. The second study includes more recent analytical data for the wastewater from 500 industrial sources, covering all the 82 industrial categories. In the result of the pollution loads analyses, the category of 'Synthetic and Chemical manufacture' was found to show the highest raw pollution load. On the other hand the category of 'Ion & Steel manufacture' was found to show the highest effluent pollution loads, which can be considered as the real impacts on natural water streams. The top five categories occupied 62.2% of the total effluent pollution loads. Through the analyses, the relative importances of each industrial categories and the priorities of TEBL-based pollution reduction were determined.

금강수계의 수질관리를 위한 QUAL-2E 모델의 적용(II) -자생BOD를 고려한 허용오염부하량 산정- (Application of QUAL-2E Model for Water Quality Management in the Keum River -Waste loads Allocation Analysis by Considering Autochthonous BOD-)

  • 김종구;이지연
    • 한국환경과학회지
    • /
    • 제10권1호
    • /
    • pp.21-25
    • /
    • 2001
  • The Keum river has been utilized for drinking water supply of several city including Kunsan city and is deepening pollution state due to numerous municipal and industrial discharges. The concentration BOD in river is affected by the organic loading from a tributary and the algae biomass that largely happen to under eutrophication state. In the eutrophic water mass such as the Keum river, the autochthonous BOD was very important part for making a decision of water quality management, because it was accounted for majority of the total BOD. The predict of water quality has important meaning for management of water quality pollution of the Keum river. The purpose of this study will manage and predict water quality of the Keum river using QUAL-2E model considering the autochthonous BOD. The estimation of autochthonous BOD represented that the relationship between BOD and chlorophyll a. The regression equation was shown to be autochthonous BOD=$\beta$(sub)5$\times$chlorophyll a. The results of this study may be summarized as followed; The QUAL-2E model was calibrated with the data surveyed in the field of the study area in June, 1998. The calculated value by QUAL-2E model are in good agree to measured value within relative error of 7.80~20.33%. Especially, in the case of the considering autochthonous BOD, the calculated value of BOD were fairly good coincided with the observed values within relative error of 15%. But the case of not considering autochthonous BOD, relative error of BOD was shown to be 43.2%. In order to attain II grade of water quality standard in Puyo station which has a intake facility of water supply, we reduced to the pollutants loading of tributaries. In the case of removed 100% BOD of tributaries, the BOD of Puyo station was 4.07mg/$\ell$, belong to III grade of water quality standard. But in the case of removed 88% nutrient of tributaries, it was satisfied to II grade of water quality standard as below 3mg/$\ell$ of BOD. For estimation of autochthonous BOD in Keum river, we are performed simulating in accordance with reduction of nutrient load(50~100%) under conditions removal 90% organic load. Occupancy of autochthonous BOD according to nutrient loading reductions were varied from 25.97~79.51%. Occupancy of autochthonous BOD was shown to be a tendency to increasing in accordance with reduction of nutrient loading. Showing the above results, the nutrient that one of the growing factor of algae was important role in decision of BOD in the Keum river. For the water quality management of the Keum river, therefore, it is necessary to considering autochthonous BOD and to construction of advanced sewage treatment plant for nutrient removal.

  • PDF

진무탕(眞武湯)이 Gentamicin-유도 신독성에 미치는 영향 (Effects of Jinmootang on the Gentamicin-induced Nephrotoxicity in Rats)

  • 이규현;김길훤
    • 동의생리학회지
    • /
    • 제14권2호통권20호
    • /
    • pp.189-198
    • /
    • 1999
  • Aminoglycosides, including gentamicin, have been used as antibiotics for the various infections by gram-negative bacteria. However, there are some restrictions for using these drugs. Gentamicin, a typical aminoglycoside, has the side effect of nephrotoxicity, including polyuria, glycosuria, proteinuria, glomerulonephritis, and uremia. The aims of this study were to examine the prevention or reduction effects of Jinmootang on the gentamicin-induced nephrotoxicity and to investigate the possible mechanisms on the effect of Jinmootang. The subcutaneous injections of 60mg of gentamicin per kg of boby weight to Sprague-Dawley rats for 8 days induced typical symptoms of nephrotoxicity by aminoglycosides. 0.6ml of water extract Jinmootang (100ml/chup) was orally treated in the experimental animal. 24-hour urine was collected with the metabolic cage and plasma was sampled from the abdominal aorta. The plasma concentration of sodium was significantly decreased by the treatment of gentamicin but it was not-significantly changed by the treatment of Jinmootang to the animal. The concentration of potassium was greatly decreased in the gentamicin-treated animals. However. it was returned to the normal level in the Jinmootang-treated animals. The concentrations of creatinine and urea were increased by gentamicin treatment. But, Jinmootang reduced these concentrations. Nevertheless, the osmolalities of plasma in both group were not different from each other. Even though the plasma concentration of aldosterone was not significantly changed, the mean value was increased by the gentamicin intoxication. The concentration of aldosterone was decreased by the treatment of Jinmootang. The reduction of aldosterone level in plasma could be a factor to improve the hypokalemia. The fractional excretion of potassium was much higher than normal by the treatment of gentamicin and it was decreased by 50% in the Jinmootang-treated rats. Therefore, the reabsorption of potassium was significantly increased by the treatment of Jinmootang, even though the filtered load of potassium in the experimental group was much highter than control. Even though the concentration of plasma aldosterone was decreased by the treatment of Jinmootang, the fractional excretion of sodium was not increased, slightly lower. These data suggested that Na reabsorption was increased in the proximal tubule by Jinmootang. The filtered load of glucose in the Jinmootang-treated group was greater than in control. Nevertheless, the fractional excretion of glucose in the experimental group was not different from that in control. These results indicate that glucose reabsorption was increase in the proximal tubule by Jinmootang treatment. The results of this study suggest that Jinmootang could improve the some nephrotoxic symptoms induced by gentramicin treatment. Hypokalemia, the reduced glomerular filtration rate, and dysfunctions of renal proximal tubule and distal nephron were significantly recovered to normal level. The increase of glomerular filtration rate by Jinmootang might contribute to eliminate the waste product, including creatinine and urea, and/or gentamicin through the kidney.

  • PDF

인사이징 처리 낙엽송 CCA-방부원주목의 강도 성능 평가 (Strength Property of the Incised Larix (Larix kaempferi Carr.) Round Posts treated with CCA)

  • 박준철;김상우;류재윤;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권3호
    • /
    • pp.85-92
    • /
    • 2008
  • 본 연구에서는 인사이징 처리 낙엽송 방부 원주목의 강도 성능을 평가하기 위하여 원목, 원주목과 강도 성능을 비교 분석하였다. 원목과 원주목의 휨강도(MOR)는 큰 차이가 없었다. 인사이징 처리 방부 원주목은 휨탄성 계수(MOE)가 9% 감소하였고 휨강도는 원목에 대한 강도비 0.71로 약 29% 강도의 저하를 보였다. 일반적인 2인치 제재목이 아닌 원주 형태의 원주목을 이용한 휨허용응력 산정시 인사이징 방부처리 저감계수를 휨탄성계수는 0.91, 휨강도는 0.71로 적용해야 할 것으로 사료된다. 못뽑기 저항은 원목, 원주목, 방부 원주목 모두 큰 차이를 보이지 않았다. 볼트 접합부의 전단력은 인사이징 처리 방부 원주목과 원주목의 차이는 거의 나타나지 않았다. 볼트 접합부의 허용 전단 내력 산정에는 인사이징 저감 계수의 적용은 검토하지 않아도 됨을 확인할 수 있었다.

강섬유 보강 초고강도 콘크리트의 인장 특성 실험 연구 (An Experimental Study on Tensile Properties of Steel Fiber-Reinforced Ultra High Strength Concrete)

  • 양인환;박지훈;이재호
    • 한국건설순환자원학회논문집
    • /
    • 제7권3호
    • /
    • pp.279-286
    • /
    • 2019
  • 본 연구에서는 기준압축강도 180MPa의 강섬유 보강 초고강도 콘크리트(UHSC)의 인장 특성에 관한 실험 연구를 수행하였다. 부피비 1%의 강섬유를 혼입하여 직접인장강도 시편과 3점 하중재하 휨 실험을 위한 프리즘 시편을 제작하였다. 제작된 시편은 균열 유도를 위하여 시편 중앙에 노치를 설정하였으며, 각 평가방법에 따라 실험을 수행하였다. 우선, 콘크리트의 균열 후 거동 특성을 파악하기 위하여 직접인장강도 실험을 수행하여 응력-변형률 곡선을 분석하였으며, 3점 하중재하 휨 실험을 통하여 하중-CMOD 곡선을 얻고, 역해석을 수행하여 응력-변형률 곡선을 분석하였다. 직접인장강도 실험과 3점 하중재하 휨 실험의 인장거동 특성은 유사하게 나타났다. 또한, SC 구조설계지침에서 제시하고 있는 인장응력-변형률 곡선 모델링을 수행하고, 측정값과 예측값의 비교분석을 수행하였다. 재료감소계수가 1.0일 때, 변형률이 0.02일 때까지 예측값은 측정값과 유사하게 나타나지만, 재료감소계수가 0.8일 때, 예측값은 측정값의 최소값에 근접한다. 또한, 변형률이 0.02를 초과하는 구간에서는 SC 구조설계지침에 의한 예측값이 측정값을 과소평가한다.

사질토 지반에 설치된 버킷기초 및 얕은기초의 수직지지력 산정 (Evaluation of Vertical Bearing Capacity for Bucket and Shallow Foundations Installed in Sand)

  • 박정선;박두희;지성현;김동준
    • 한국지반환경공학회 논문집
    • /
    • 제16권9호
    • /
    • pp.33-41
    • /
    • 2015
  • 사질토 지반에 설치된 버킷기초의 수직지지력은 주면마찰력과 선단지지력의 합으로 산정할 수 있다. 하지만 수직하중 작용 시 나타나는 주면마찰력 감소와 선단지지력 증가의 특징을 정확하게 고려할 수 있는 설계식이 없으며, 실제와 같은 사질토 지반의 비관련흐름 특성이 반영되어야 한다. 본 연구에서는 2차원 축대칭 유한요소해석으로 사질토 지반에 설치된 원형 버킷기초의 수직지지력을 다양한 지반 마찰각과 기초 크기에 대하여 산정하였다. 해석 결과의 극한지지력을 주면마찰력과 선단지지력으로 분리하여 특징을 분석한 후 각각의 설계식을 도출하였다. 버킷기초의 주면마찰력은 선단지지력에 비해 크기가 매우 작고 말뚝 설계식과 차이가 근소하므로 이를 동일하게 사용하였다. 주면마찰력의 영향으로 얕은기초의 지지력보다 증가하는 버킷기초의 선단지지력은 기존의 설계식을 수정하여 적용할 수 있도록 해석 결과를 토대로 새로운 형상-깊이계수($s_q{\cdot}d_q$)를 제안하였다. 또한 관련흐름법칙을 적용하여 제안된 기존의 얕은기초 형상계수와 깊이계수는 실제 사질토 지반에서의 지지력을 과대예측하므로 비관련흐름 특성을 반영한 형상-깊이계수를 사용하여 지지력을 예측해야 한다.

조립토 다짐말뚝에 대한 현장재하시험 결과 및 간편 침하량 산정방법의 제시 (Field Load Test Results and Suggestion of Simple Settlement Estimation Method for Granular Compaction Piles)

  • 황정순;김홍택;김정호;이상경;이형규
    • 한국지반공학회논문집
    • /
    • 제21권3호
    • /
    • pp.159-168
    • /
    • 2005
  • 조립토 다짐말뚝의 침하거동에 대한 현재까지의 연구성과들은 주로 응력분담비와 치환율을 토대로 한 침하저감계수의 평가를 위주로 수행되어 왔으나, 조립토 다짐말뚝이 설치된 지반을 복합지반으로 단순화하여 분석을 수행함으로서, 말뚝의 변형시 주로 발생하는 상부영역의 횡방향 거동을 반영하지 못하고 응력분담비로 표현되는 연직방향의 상대강성 차이와 치환율만을 고려한다는 제약성이 있다. 필자 등은 이러한 제약성을 보완하는 데 초점을 두어, 말뚝재료의 강성 및 직경 그리고 지반의 연직방향 강성과 함께 횡방향 변형을 종합적으로 고려하는 침하량 평가기법을 기 제안한 바 있다. 본 연구에서는 기 제안된 기법의 적용 타당성 등을 보다 구체적으로 확인하기 위해, 현장재하시험 및 3차원 수치해석 등을 실시하여 그 결과를 비교, 분석하였다. 아울러 기 제안된 침하량 평가기법 등을 활용하여, 실무에서 간편하게 수 계산으로 조립토 다짐말뚝의 침하량 산정이 가능한 방법을 제안하였다.

SEM파일의 이완하중 산정방법별 이완하중량 비교 연구 (A study on the comparison by the methods of estimating the relaxation load of SEM-pile)

  • 김형규;박은형;조국환
    • 한국터널지하공간학회 논문집
    • /
    • 제20권3호
    • /
    • pp.543-560
    • /
    • 2018
  • 도심지 지하공간의 개발과 운행선 하부를 저토피로 입체 교차화하는 시설 증가에 따라 비개착식 공법의 수요는 점차 증가추세에 있으나 대다수의 공법은 중대구경 강관을 압입하여 루프를 형성하고 내부를 굴착하는 파이프루프(Pipe roof) 계열의 공법이 주로 적용되고 있다. 강관 압입 시 발생되는 이완영역 및 하중은 여러 인자의 영향을 받게 되나 가장 큰 요소는 압입하는 강관의 크기에 좌우되며 이는 강관 루프 내 지중구조물에 작용하는 하중의 크기로 볼 수 있다. 지반의 교란 및 이완하중 발생을 최소화시키기 위해 개발된 SEM공법(Super Equilibrium Method)은 기존의 중대구경 강관 대신 ${\Phi}114mm$ 내외의 소구경 강관을 사용한다. 이 소구경 강관을 SEM파일로 명명하였으며 강관의 선 압입 및 그라우팅 보강을 실시한 후 지반의 침하나 융기 없이 지반 내 횡단구조물을 유압잭을 이용하여 압입하게 된다. 이와 같이 SEM공법의 구성 중 지보역할을 하는 SEM파일은 선단부 굴착 시 지반의 붕락을 방지하고 상재하중을 지지하기 위한 길이 5 m 내외의 Fore poling 파일이며 이 파일의 배치간격, 시공연장, 부재의 강성 등을 산정하기 위해서는 이완영역의 적절한 산정이 필수적이다. 본 논문은 SEM공법의 최적설계를 위하여 SEM파일 압입 시 발생되는 이완하중 산정 값을 비교분석하였다. 이완영역 산정에 근거한 주요 이론식 및 경험식들의 영향인자를 고려하여 분석하고 FEM analysis (유한요소 해석)를 수행하여 SEM파일에 적합한 이완하중 산정을 검토하였다. 또한 실제 SEM파일 압입 및 굴착 시 발생되는 지반이완을 확인하기 위해 강관압입 축소모형실험을 수행하였으며 토피고/강관(H/D)에 따른 지표침하 및 지반이완을 정량적으로 검토하였다.

항공기 주익구조물의 피로균열 진전 해석 및 실험을 위한 응력 스펙트럼 알고리즘 개발 (Stress Spectrum Algorithm Development for Fatigue Crack Growth Analysis and Experiment for Aircraft Wing Structure)

  • 천영철;장윤정;정태진;강기원
    • 대한기계학회논문집A
    • /
    • 제39권12호
    • /
    • pp.1281-1286
    • /
    • 2015
  • 항공기는 다양한 임무를 수행함으로써 장기간 운영 시 비행시간 누적으로 인해 피로균열을 발생시킬 수 있다. 주익 구조물에 균열이 발생하면 수명단축 등 여러 문제점들이 발생할 수 있다. 이의 해결을 위해 피로임계위치(Fatigue critical location, FCL)에서의 균열진전 해석이 필요하다. 균열진전 해석을 위해서는 장시간의 응력 스펙트럼이 필요한데 실제 항공기에서 필요한 만큼의 데이터를 얻는 것은 막대한 시간과 비이 소요된다. 본 논문에서는 SwRI(South West Research Institute)보고서에 제시되어있는 임무별 단시간 하중배수 자료를 바탕으로 Peak-Valley Cycle Counting 을 진행하여 장시간의 응력 스펙트럼을 산출하는 알고리즘을 개발하였다.