• 제목/요약/키워드: Load reduction

검색결과 2,339건 처리시간 0.04초

운동훈련(運動訓練)에 대(對)한 심폐기능(心肺機能)의 적응(適應)에 관(關)한 연구(硏究) (Cardio-pulmonary Adaptation to Physical Training)

  • 조강하
    • The Korean Journal of Physiology
    • /
    • 제1권1호
    • /
    • pp.103-120
    • /
    • 1967
  • As pointed out by many previous investigators, the cardio-pulmonary system of well trained athletes is so adapted that they can perform a given physical exercise more efficiently as compared to non-trained persons. However, the time course of the development of these cardio-pulmonary adaptations has not been extensively studied in the past. Although the development of these training effects is undoubtedly related to the magnitude of an exercise load which is repeatedly given, it would be practical if one could maintain a good physical fitness with a minimal daily exercise. Hence, the present investigation was undertaken to study the time course of the development of cardio-pulmonary adaptations while a group of non-athletes was subjected to a daily 6 to 10 minutes running exercise for a period of 4 weeks. Six healthy male medical students (22 to 24 years old) were randomly selected as experimental subjects, and were equally divided into two groups (A and B). Both groups were subjected to the same daily running exercise (approximately 1,000 kg-m). 6 days a week for 4 weeks, but the rate of exercise was such that the group A ran on treadmill with 8.6% grade for 10 min daily at a speed of 127 m/min while the group B ran for 6 min at a speed of 200 m/min. In order to assess the effects of these physical trainings on the cardio-pulmonary system, the minute volume, the $O_2$ consumption, the $CO_2$ output and the heart rate were determined weekly while the subject was engaged in a given running exercise on treadmill (8.6% grade and 127 m/min) for a period of 5 min. In addition, the arterial blood pressure, the cardiac output, the acid-base state of arterial blood and the gas composition of arterial blood were also determined every other week in 4 subjects (2 from each group) while they were engaged in exercise on a bicycle ergometer at a rate of approximately 900 kg m/min until exhaustion. The maximal work capacity was also determined by asking the subject to engage in exercise on treadmill and ergometer until exhaustion. For the measurement of minute volume, the expired gas was collected in a Douglas bag. The $O_2$ consumption and the $CO_2$ output were subsequently computed by analysing the expired gas with a Scholander micro gas analyzer. The heart rate was calculated from the R-R interval of ECG tracings recorded by an Offner RS Dynograph. A 19 gauge Cournand needle was inserted into a brachial artery, through which arterial blood samples were taken. A Statham $P_{23}AA$ pressure transducer and a PR-7 Research Recorder were used for recording instantaneous arterial pressure. The cardiac output was measured by indicator (Cardiogreen) dilution method. The results may be summarized as follows: (1) The maximal running time on treadmill increased linearly during the 4 week training period at the end of which it increased by 2.8 to 4.6 times. In general, an increase in the maximal running time was greater when the speed was fixed at a level at which the subject was trained. The mammal exercise time on bicycle ergometer also increased linearly during the training period. (2) In carrying out a given running exercise on treadmill (8.6%grade, 127 m/min), the following changes in cardio·pulmonary functions were observed during the training period: (a) The minute volume as well as the $O_2$ consumption during steady state exercise tended to decrease progressively and showed significant reductions after 3 weeks of training. (b) The $CO_2$ production during steady state exercise showed a significant reduction within 1 week of training. (c) The heart rate during steady state exercise tended to decrease progressively and showed a significant reduction after 2 weeks of training. The reduction of heart rate following a given exercise tended to become faster by training and showed a significant change after 3 weeks. Although the resting heart rate also tended to decrease by training, no significant change was observed. (3) In rallying out a given exercise (900 kg-m/min) on a bicycle ergometer, the following change in cardio-vascular functions were observed during the training period: (3) The systolic blood pressure during steady state exercise was not affected while the diastolic blood Pressure was significantly lowered after 4 weeks of training. The resting diastolic pressure was also significantly lowered by the end of 4 weeks. (b) The cardiac output and the stroke volume during steady state exercise increased maximally within 2 weeks of training. However, the resting cardiac output was not altered while the resting stroke volume tended to increase somewhat by training. (c) The total peripheral resistance during steady state exercise was greatly lowered within 2 weeks of training. The mean circulation time during exorcise was also considerably shortened while the left heart work output during exercise increased significantly within 2 weeks. However, these functions_at rest were not altered by training. (d) Although both pH, $P_{co2}\;and\;(HCO_3-)$ of arterial plasma decreased during exercise, the magnitude of reductions became less by training. On the other hand, the $O_2$ content of arterial blood decreased during exercise before training while it tended to increase slightly after training. There was no significant alteration in these values at rest. These results indicate that cardio-pulmonary adaptations to physical training can be acquired by subjecting non-athletes to brief daily exercise routine for certain period of time. Although the time of appearance of various adaptive phenomena is not identical, it may be stated that one has to engage in daily exercise routine for at least 2 weeks for the development of significant adaptive changes.

  • PDF

허혈성 심장 질환의 One-stop Evaluation Protocol: Myocardial Fusion PET Study (One-stop Evaluation Protocol of Ischemic Heart Disease: Myocardial Fusion PET Study)

  • 김경목;이병욱;이동욱;김정수;장영도;방찬석;백종훈;이인수
    • 핵의학기술
    • /
    • 제14권2호
    • /
    • pp.33-37
    • /
    • 2010
  • 관상동맥질환의 진단 및 평가에 있어서 myocardial perfusion SPECT검사와 FDG를 이용한 myocardial PET검사 그리고 PET/CT에 장착된 64-slice CT를 이용한 coronary CT angiography를 동시에 실행함으로 검사의 신뢰도와 편의성을 한층 더 높이고자 한다. 먼저 약물부하 myocardial perfusion SPECT검사를 먼저 시행한다. 환자의 피폭경감을 위해서 $^{99m}Tc$-MIBI 10 mCi 로 주사하며 myocardial PET검사를 위해서 지방식을 먹지 않고 ursodeoxcholic acid 100 mg을 생수와 함께 복용하게 하여 1시간 후에 SPECT 영상을 얻는다. 이어서 myocardial FDG PET검사를 시행한다. 혈중의 지방산 농도를 낮추고 심장의 FDG섭취율을 증가시키기 위해 혈중 포도당 농도치에 따라 insulin과 Acipimox를 함께 사용하는 독창적인 경구 당 부하법을 사용하였으며, 환자의 피폭 경감을 위해서 $^{18}F$-FDG 5 mCi를 주사하고 1시간 후에 10분간 gated 영상을 얻으며 필요시 delay 영상을 얻는다. PET검사가 끝남과 동시에 환자는 동일한 position을 하고 연속해서 coronary CTA를 시행한다. 이 검사에서 가장 중요한 것은 심박동수 조절과 환자의 호흡협조이다. 심박동수를 65회 이하로 낮추기 위해 beta blocker 50 mg~200 mg을 의사와 상의하여 복용케 하고 호흡법을 충분히 연습을 시키다. 검사 직전에 isosorbide dinitrate를 3~5회 분무하여 혈관벽의 긴장을 낮추고 혈관을 확장시켜서 coronary artery의 해부학적 형태를 더욱 잘 나타낼 수 있게 한다. 촬영 시 CT 조영제를 4.0~5.0 mL/sec의 압력으로 주입하며 촬영을 한다. Coronary CTA를 이용하면 coronary artery stenosis가 잘 보이며, 약물부하 myocardial perfusion SPECT로 coronary CTA에서 보인 stenosis와 perfusion저하의 상관관계를 검토(culprit vessel 확인)할 수 있으며, FDG PET으로 hibernating myocardium 또는 infarction site의 viability를 확인할 수 있다. 한 가지 검사로 lesion site와 severity 및 치료에 대한 반응 예측이 가능함으로 약물치료, PCI, CABG 등 치료방향을 설정할 수 있다. 또한 모든 검사 과정들이 연속적으로 동시에 이루어지기 때문에 짧은 시간(3시간) 내에 one-stop으로 검사를 종료할 수 있는 큰 장점을 가지게 된다. 그러므로 이 검사법은 ischemic heart disease의 one-stop evaluation에 있어서 유용한 protocol로 보여진다.

  • PDF

반복 하중이 Full veneer crown의 유지력에 미치는 영향에 관한 연구 (THE EFFECT OF CYCLIC LOADING ON THE RETENTIVE STRENGTH OF FULL VENEER CROWNS)

  • 김기연;이선형;정헌영;양재호;허성주
    • 대한치과보철학회지
    • /
    • 제38권5호
    • /
    • pp.583-594
    • /
    • 2000
  • Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

  • PDF

불투수면 저감기법의 유출량 및 오염부하량 저감 효과 분석 (Analysing the effect of impervious cover management techniques on the reduction of runoff and pollutant loads)

  • 박형석;최환규;정세웅
    • 환경영향평가
    • /
    • 제24권1호
    • /
    • pp.16-34
    • /
    • 2015
  • 불투수면(IC)이란 빗물 등의 강수가 토양 속으로 침투할 수 없는 포장 지역이라 정의할 수 있으며, 일반적으로 도시화 과정에서 형성되는 불투수면은 주로 도로(Drive way), 인도(Sidewalk), 주차장(Parking lot), 건물의 지붕(Roof) 등의 형태로 나타난다. 불투수면의 증가는 유출계수를 증가시켜 강수의 침투량 및 지하수 수위를 감소시킨다. 이로 인해 홍수기에 직접 유출량과 홍수피해를 증가시키고, 갈수기에는 하천의 건천화를 유발하여 수생태계를 악화시킨다. 미국 환경부에서는 불투수면을 저감하기 위한 주요정책으로 LID(Low Impact Development) 또는 GI(Green Infrastructure)의 도입을 제시하고 있다. 본 연구에서는 도시 유역의 강우-유출 및 수질 해석을 위해 SWMM모형을 구축하고, 도시 유역의 대표적인 토지이용 유형에서 불투수면 영향 저감을 위한 다양한 LID 기법을 적용하고 그 효과를 평가하였다. 모형의 보정기간은 2009년 7월 17일, 검정기간은 2009년 8월 11일이며, 강우유출발생시 측정한 실측 데이터를 사용하여 검 보정을 하였다. 아파트, 학교, 도로, 공원 등으로 구성된 복합용지에 투수성 포장(Pervious cover)과 옥상녹화(Green roof)기법을 단계별로 적용하고 유출량 및 오염부하 저감에 미치는 영향을 모의한 결과, 유역 내 불투수면이 투수면으로 전환되는 비율이 증가함에 따라 강우시 발생하는 유출량과 오염물질 부하량의 저감 효과가 큰 것으로 나타났다. 특히, 건물 옥상 녹화 및 주차장과 도로에 투수성 포장을 적용한 경우, 총 유출량은 15~61 %의 저감효과를 보였으며, 오염부하량에 대해서는 TSS 22~72 %, BOD 23~71 %, COD 22~71 %, TN 15~79 %, TP 9~64 %의 저감효율을 나타냈다.

직접분사식 디젤엔진에서 아산화질소의 생성에 관한 실험적 연구 (A Experimental Study on Nitrous Oxide Formation in Direct Injection Diesel Engine)

  • 유동훈
    • 해양환경안전학회지
    • /
    • 제21권2호
    • /
    • pp.188-193
    • /
    • 2015
  • 일반적으로 선박용 디젤엔진의 아산화질소($N_2O$)배출률은 이산화황($SO_2$)배출률과 밀접한 상관성을 갖고 있고, 선박에서 사용되는 연료의 다양성은 $N_2O$배출특성에 영향을 미친다고 받아들여져 왔다. 최근의 연구보고에 의하면 연료 연소에서 발생한 충분한 일산화질소(NO)가 존재할 경우, 배기의 $SO_2$배출률이 $N_2O$생성에 미치는 영향은 NO의 영향보다 막대하게 크다. 그러므로 $SO_2$성분으로부터 기인하는 $N_2O$생성은 NOx저감을 위한 배기가스 재순환(EGR) 시스템에서 중요한 인자로 작용한다. 본 실험적인 연구의 목적은 $SO_2$유량 증가를 갖는 디젤엔진의 흡기가 배기의 $N_2O$배출률에 미치는 영향에 대하여 조사하는 것이다. 실험에 사용된 테스트 엔진은 2600rpm에서 12kW의 출력을 갖는 4행정 직접분사식 디젤엔진이고, 운전조건은 75% 부하에서 실시되었다. 0.499%($m^3/m^3$)의 $SO_2$표준가스는 흡기의 $SO_2$농도를 변화시키기 위해 사용되었다. 결과적으로 황 성분을 포함하지 않는 연료는 $SO_2$를 배출시키지 않았고, 흡기 중에 $SO_2$표준가스의 증가에 따른 배기의 $SO_2$배출률은 $SO_2$흡입률과 비교하여 거의 같은 비율이었다. 또한, 흡기의 $SO_2$유량 상승은 $N_2O$배출률을 상승시켜 배기 중의 $N_2O$는 흡기의 $SO_2$혼합기에 의해 생성되었다. 결국 황 성분을 함유한 연료는 연소 중에 $SO_2$를 형성하고 배기 중의 $N_2O$는 연소실에 존재하는 NO와 $SO_2$의 반응에 의해 발생된다고 할 수 있다.

시화호 유입하천의 수질오염물질 농도에 관한 연구 (Spatial Characteristics of Pollutant Concentrations in the Streams of Shihwa Lake)

  • 장정익;한인섭;김경태;나공태
    • 대한환경공학회지
    • /
    • 제33권4호
    • /
    • pp.289-299
    • /
    • 2011
  • 본 연구에서는 시화호 연안오염총량관리제 도입시 과학적인 기초자료를 제공하기 위하여 하천을 통해 시화호로 유입되는 수질오염물질의 농도 특성을 조사하였다. 시화호 유역 하천수 내 부유물질(SS), 화학적 산소요구량(COD), 용존영양염($NO_2$, $NO_3$, $NH_4$, $PO_4$, $SiO_2$), 총인(TP) 및 총질소(TN) 등을 분석하였으며 조사시기별 및 지역별(산업지역, 도시지역 및 농업지역) 하천수의 오염물질 농도 특성을 비교하였다. 12월 조사 결과가 다른 조사 시기에 비해 모든 수질항목에서 상대적으로 높은 농도를 나타냈다. 산업지역 내 하천수에서의 COD의 평균값은 12.6 mg/L로 도시지역(6.6 mg/L) 및 농업지역(5.9 mg/L)에 비해 약 2배 높은 농도를 나타냈다. 총인 농도는 COD와 유사하게 산업지역 내 하천수에서 가장 높았고 농업지역 내 하천에서 상대적으로 낮은 농도를 보였으며 용존 인산염($PO_4$)이 약 21%를 차지하고 있었다. 총질소는 산업지역, 도시지역 및 농업지역에서의 평균농도가 각각 5.89 mg/L, 3.02 mg/L 및 5.27 mg/L로 산업지역과 더불어 질소계 비료의 사용의 영향으로 농업지역에서도 높은 농도를 보였다. 조사시기 및 지역에 따라 차이는 있으나 총질소 중 질소화합물의 평균비율은 $NH_4$ (35.1%) > $NO_3$ (30.0%) > DON (22.8%) > PON (8.9%) > $NO_2$ (3.2%)의 순으로 나타났고 약 70%가 용존무기질소($NH_4$, $NO_3$, $NO_2$)의 형태로 존재하고 있었다. 하천수의 용존영양염, 총인 및 총질소 농도는 시화호 표층수에 비해 3.2~37.2배 높았으며 이는 많은 양의 오염물질이 처리과정 없이 하천을 통해 시화호로 유출되는 것을 시사하고 있다. 특히 시화산단을 관통하는 군자천 중류지역에서 상류 또는 하류지점에 비해 높은 농도를 나타내 산업단지에서 발생한 하수와 폐수 일부가 관로 오접 및 무단 방류되어 하수구를 통하여 유입되고 있어 하천수에 대한 하수처리시설로의 이송 및 환경기초시설 증대 등의 대책이 필요한 것으로 사료된다. 본 연구결과는 향후 시행 예정인 시화호 연안오염총량관리제의 기본계획 및 시행계획 수립시 오염부하량 산정과 삭감계획 수립에 유용한 정보로 사용될 수 있을 것이다.

완전 지르코니아 크라운의 교합면 두께에 따른 파절강도의 비교 연구 (Comparative study of fracture strength depending on the occlusal thickness of full zirconia crown)

  • 장수아;김윤영;박원희;이영수
    • 대한치과보철학회지
    • /
    • 제51권3호
    • /
    • pp.160-166
    • /
    • 2013
  • 연구 목적: 본 연구의 목적은 전통적인 금속도재관과 완전 지르코니아 크라운의 교합면 두께에 따른 파절강도를 비교하는 것이다. 연구 재료 및 방법: 하악 제1대구치에 해당하는 레진치를 교합면 1.5 mm, 변연은 1.0 mm 폭의 rounded shoulder로 하고 축면 경사각이 $6^{\circ}$가 되도록 삭제하여 금속 다이 64개를 제작하였다. 완전 지르코니아 크라운은ZIRKONZAHN CAD/CAM을 이용하여 Prettau zirconia blanks를 절삭하여 48개의 크라운을 제작하고 교합면 교두정의 두께에 따라 6개 군으로 분류하였다(0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm). 16개의 금속도재관을 제작하여 교합면 교두정 도재의 두께에 따라 2개 군으로 분류하였다(1.0 mm, 1.5 mm). 완성된 완전 지르코니아 크라운과 금속도재관은 만능시험기 상에서 치아 교합면에 수직으로 하중이 가하도록 하여 파절강도를 측정하였다. One-way ANOVA, Tukey multiple comparison test (${\alpha}=.05$)와 t-test (${\alpha}=.05$)로 검정하였다. 결과: 본 연구의 결과는 다음과 같다. 1. 실험 1군은 가장 낮은 값(646.48 N)을 나타내었고(P<.05), 실험 2, 3, 4, 5군은 교합면의 두께가 증가할수록 파절강도는 증가하였지만 (866.40 N, 978.82 N, 1196.82 N, 1222.41 N) 통계적으로 유의한 차이를 나타내지 않았다(P>.05). 실험 6군은 다른 군보다 통계적으로 유의하게 가장 높은 값(1781.24 N)을 나타내었다(P<.05). 2. 대조군의 파절강도는 도재의 두께가 1.0 mm와 1.5 mm일때각각2515.71 N, 3473.31 N이며 이는 통계적으로 유의한 차이를 나타내지 않았다(P>.05). 결론: 완전 지르코니아 크라운은 대구치부에서 최대교합력보다 높은 파절강도를 갖기 위해서는 1.0 mm이상의 두께가 필요하다.

중학교 가정과 교사의 교과 관련 교내 자율장학에 대한 인식과 실태 (Middle school Home Economics teachers' perception and actual performance of self-supervision at school related to Home Economics)

  • 고미영;채정현
    • 한국가정과교육학회지
    • /
    • 제22권4호
    • /
    • pp.91-107
    • /
    • 2010
  • 본 연구의 목적은 중학교 가정과 교사들의 가정교과관련 교내 자율장학에 관한 인식 및 수행실태를 알아봄으로써 가정과 교사의 가정교과관련 전문성 신장 활동을 지원하는데 필요한 기초 자료를 제공하는데 있다. 본 연구는 전국의 가정과 교사를 대상으로 이메일을 통하여 설문조사를 하였다. 회수된 질문지 150부는 SPSS/Win(Ver 10.1) 프로그램을 이용하여 빈도, 백분율, 평균, 표준편차, ANOVA, T-test로 분석되었다. 중학교 가정과 교사를 대상으로 한 본 연구의 결과는 다음과 같다. 첫째, 가정교과관련 교내 자율장학 인식에 대해서 대부분(88.0%)의 가정과 교사는 이 장학이 자기반성과 전문성 향상에 도움이 되므로 매우 필요하다고 인식하고 있으며, 선호하는 장학은 동료장학으로 나타났다. 둘째, 가정교과 교내 자율장학의 목표 선정 및 구체적인 계획 수립에 대해서 반 정도(50.7%)의 가정과 교사들은 이 장학의 목표 선정 및 계획 수립 과정이 가정교과협의회를 거쳐서 민주적으로 결정된다고 인식하였다. 셋째, 교내장학의 유형별 실시 횟수의 경우, 수업장학과 약식장학은 1년에 1회 정도이었고, 자체연수는 실시되지 않는 편이였다. 동료장학과 자기장학은 수시로 이루어졌다. 장학의 유형별 도움의 정도는 자기장학과 동료장학이 가장 높은 것으로 나타났다. 장학에 도움을 얻는 분야는 장학유형에 상관없이 가정과교수방법이 가장 높게 나왔으며, 다음으로는 교과내용, 교육평가, 교육철학 순이었다. 넷째, 교장이나 교감과 동료교사의 장학에 대한 실제적 도움 정도에 대해서는 별로 도움을 받지 못하는 것으로 나타났다. 동료교사와의 다양한 정보공유는 열심히 하는 편이나 아직도 22.6%에 달하는 중학교 가정과 교사들이 정보공유를 기피하는 것으로 나타났다. 반 정도(43.3%)의 가정과 교사는 교수-학습개선을 위한 수업공개자로 '모든 교사'를 꼽았다. 다섯째, 대부분(70.7%)의 가정과 교사는 가정교과관련 교내 자율장학이 잘 실행되지 않는 이유로 과중한 업무 부담으로 인한 시간 부족, 교수-학습 개선활동에 대한 부정적, 소극적 태도, 교사의 의견이 반영되지 못하는 행정위주의 장학형태, 경제적, 환경적 여건부족을 꼽았다. 대부분의 가정과 교사들은 항상 열심히 교수-학습개선을 위해 노력하는 동료교사를 장학담당자로 가장 선호하며, 교내 자율장학의 수행 후 평가방법으로는 교사 스스로 평가하는 자기 평가를 가장 선호하였다. 여섯째, 교내 자율장학 활성화를 위해서 잡무경감 및 시간적 여유, 가정교육학에 대한 확실한 철학, 2007 개정 교육과정에 적용된 실천적 문제 중심 교육과정의 인지, 다양한 지원 프로그램 제공, 도서, 자료, 도구, 장소 등 물리적 지원, 교내 가정과 동료교사가 없는 경우 관내에서 가정과 교사들과 연계, 장학담당자(교장, 교감)의 장학에 대한 적극적 지원을 요구하였다.

  • PDF

강관 및 PHC 매입말뚝의 최적화에 따른 교량기초의 공사비 비교 (Comparison of Construction Costs for Bridge Foundation with Optimization of Steel and PHC Embedded Piles)

  • 윤중만;여규권;김홍연;김동민;김수로
    • 한국지반신소재학회논문집
    • /
    • 제15권4호
    • /
    • pp.71-78
    • /
    • 2016
  • 본 연구에서는 동일한 지층 및 하중조건에서 PHC말뚝을 강관말뚝으로 대체할 경우 말뚝 본수의 변화와 푸팅을 포함한 공사비를 비교하였다. 얕은 풍화암층에 강관말뚝을 지지할 경우 PHC말뚝과 비교하여 12.5%의 본수가 절감되었다. 실 사례로부터 가정된 1.7m 두께의 풍화암층을 통과하여 깊은기초를 연암층에 지지할 경우 일반 및 고강도 강관말뚝은 각각 풍화암층에 설치한 PHC 말뚝 대비 35.7% 및 46.4%, 강관말뚝 대비 26.5% 및 38.8%의 본수가 절감되는 효과가 있는 것으로 나타났다. 푸팅두께가 일정하다고 가정할 경우 풍화암층을 관통하여 연암층에 설치된 일반 및 고강도 강관말뚝은 풍화암층에 설치된 PHC말뚝 대비 각각 12.2% 및 45.4%까지 푸팅의 소요면적을 절감할 수 있는 것으로 나타났다. 이러한 결과를 가지고 말뚝시스템의 전체 공사비를 산정한 결과 풍화암에 지지된 PHC말뚝과 비교할 때 연암층에 설치된 일반 강관말뚝의 비용은 12% 높게 산정된 반면, 이를 고강도 강관말뚝으로 대체하였을 경우는 오히려 16% 절감효과가 있는 것으로 나타났다. 이는 고강도 강관말뚝의 재료비가 상대적으로 높으나 말뚝 본수 및 푸팅면적의 감소로 인한 비용 절감효과가 더 크기 때문이다. 풍화암층 두께를 변화시키며 해석하여 말뚝시스템의 공사비를 비교한 결과 풍화암층 두께가 5m 이하인 조건에서는 PHC말뚝을 풍화암층에 지지하는 것보다 이를 관통하여 연암층에 고강도 강관말뚝을 지지하는 것이 전체 공사비 측면에서 유리한 것으로 나타났다.

포장가속시험을 이용한 보수형 배수성 포장의 온도저감 효과 및 소성변형 저항특성 연구 (Evaluation of the Temperature Drop Effect and the Rutting Resistance of Moisture Retaining-Porous Asphalt Pavement Using Accelerated Pavement Testing)

  • 곽병석;서영찬;송철영;김주원
    • 한국도로학회논문집
    • /
    • 제11권3호
    • /
    • pp.97-109
    • /
    • 2009
  • 높은 포장온도는 아스팔트포장 소성변형의 주요인이나 소성변형을 줄이기 위한 방안으로서 포장온도를 줄이는 측면에서는 아직 많은 연구가 이루어지지 않은 실정이다. 본 연구에서는 소성변형결함을 줄이기 위한 하나의 대안으로, 온도저감 효과가 있는 것으로 알려져 있는 보수성 포장을 배수성 포장의 하부층에 설치한 포장의 공용특성을 연구하였다. 본 연구의 목적은 보수형 배수성 포장의 온도저감효과를 정량화하고, 포장가속시험(Accelerated Pavement Testing)을 이용하여 온도 저감에 따른 소성변형 감소효과를 확인하고, 정량화하는데 있다. 또한 추가적으로 보수성 포장의 상대강도계수를 분석하고, 일반 포장과 비교하여 설계법 적용시 포장두께를 줄일 수 있는지 여부를 알아보고자 하였다. 본 연구를 위해 보수형 배수성포장 2개 단면 및 일반 배수성 포장 1개 단면 등 총 3개 시험구간이 시공되었다. 히팅 및 살수를 일정주기로 실시하였으며 하중조건은 윤하중 8.2ton, 타이어 공기압 $7.03kgf/cm^2$ 타이어 접지면적 $610cm^2$이었다. 이 연구에서 포장체 온도저감효과는 중간층의 경우 $6.6{\sim}7.9^{\circ}C$(평균$7.4^{\circ}C$), 표층의 경우 $7.9{\sim}9.8^{\circ}C$(평균 $8.8^{\circ}C$)였으며, 이를 통해 포장표면의 소성변형 발생을 26% 감소시킬 수 있었다. 또한 탄성계수로부터 추정된 보수성 포장의 상대강도계수는 0.173으로 일반 밀입도 포장의 1.2배 정도였으며, 일반배수성 포장 구간에서는 표층, 중간층, 기층 모두 소성변형이 발생한데 반해 보수형 배수성 포장 구간에서는 표층에서 대부분의 소성변형이 발생된 것으로 나타났다.

  • PDF