• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.56-64
• /
• 2019

Recently, as the environmental regulation for earth moving equipment has been tightened, advanced systems using electronic control have been introduced for energy savings. An IMV(Independent Metering Valve), which consists of four 2-way valves, is one of the electro-hydraulic control systems that provides more flexible controllability and potential for energy savings in excavators, when compared to the conventional 4-way spool valve system. To fully realize an IMV, a two-stage bi-directional flow control valve which can regulate the large amount of flow in both directions, should be developed in advance. A simple design that allows proportional flow control to apply the pilot pressure from the current-controlled solenoid to the spring loaded flow control spool and thus valve displacement, is proportional to the solenoid current. However, this open-loop type valve is vulnerable to flow force which directly affects the valve displacement. Force feedback servo of which the position loop is closed by the feedback spring which interconnects the solenoid valve and flow control spool, could compensate for the flow force. In this study, linearity for the solenoid current input and robustness against load pressure disturbance is investigated by linear analysis of the static nonlinear equations for the IMV proportional flow control valve with feedback spring. Gains of the linear system confirm the performance improvement with the feedback spring design.

• 한국컴퓨터정보학회논문지
• /
• 제28권2호
• /
• pp.143-151
• /
• 2023

이 연구는 남자대학생을 대상으로 점진적 스쿼트 운동시 하체 근활성도와 발바닥압력의 변화를 살펴보고 근전도와 스마트 슈즈를 이용하여 근육이 불균형을 확인 및 인지시키고 즉각적인 피드백을 제공하여 효율적인 운동지도에 도움이 되고자 실시되었다. 연구의 대상자는 D대학교 재학생으로 20명으로 실시하였다. 이 연구 결과 스퀴트 부하가 증가할수록 8개 근육 중 왼쪽 반힘줄모양근, 양쪽 앞정강근을 제외한 모든 근육의 활성도가 유의하게 증가하였으며, 발바닥 압력은 스쿼트 부하가 증가될 수 발앞부(FF)의 압력이 유의하게 증가하였고 발뒤부(RF)의 압력은 유의하게 감소하였다. 따라서 웨어러블 기기를 이용하여 즉각적인 피드백 제공은 근육의 불균형을 예방하고 효과적인 운동지도를 할 수 있을 것으로 생각된다.

• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.41-47
• /
• 2003

In this study an elevator plant model is made with an electro-hydraulic servo valve and a single rod cylinder. A PID controller, a velocity feedback PID controller and a MRAC controller ate designed. Experimental apparatus including an elevator plant model and these controllers are constructed. In case of experiment, external load which is made with a hydraulic cylinder and a pressure control valve burdens varying load to the elevator plant model being driven. With experiment, the control performances of three proposed control methods are compared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1075-1080
• /
• 2007

In order to reduce energy consumption, secondary controlled system has been applied to many types of equipments. In lifting equipments or press machines using hydraulic cylinder, a hydraulic transformer is used as a control component instead of a valve for motion control and a component for recovering potential energy of load. The transformer is a combination of a variable displacement pump/motor as a secondary controlled element and a fixed displacement pump/motor. In this paper the effect of transformer is studied. Multiple closed loop controllers with displacement feedback of variable pump/motor, speed feedback and position feedback of cylinder are used. The efficiency and energy consumption when cylinder is driven up and down is calculated by simulation. Simulation results show that considerable energy saving is achieved by choosing load ratio, circuit type and supply pressure.

• 대한물리의학회지
• /
• 제14권2호
• /
• pp.1-7
• /
• 2019

PURPOSE: This study was conducted to investigate effects of shoulder adduction load on rotator cuff muscles, including the infraspinatus, during the external rotation exercise of shoulder. METHODS: This study investigated 16 healthy university students from Daegu University. Before the study started, all participants understood the content of this study. They signed an informed consent form. Five electrodes for surface electromyography (sEMG) were attached to their infraspinatus, middle deltoid, posterior deltoid, upper trapezius and pectoralis major. The participants then underwent the shoulder external rotation exercise with the shoulder adduction at three loads (0 mmHg, 20 mmHg and 40 mmHg) that were controlled using a stabilizer Pressure $Bio-feedback^{TM}$ device. The surface electrodes recorded the electromyographic data during the external rotation exercise of shoulder. RESULTS: The infraspinatus was most activated when the shoulder adduction pressure was 40 mmHg during the external rotation exercise of shoulder. The infraspinatus activation significantly increased when the shoulder adduction pressure intensity increased, while the middle deltoid activation and the posterior deltoid activation significantly decreased (p<.05). CONCLUSION: In conclusion, increases in shoulder adduction load intensity during shoulder external rotation exercises can have a positive effect on the infraspinatus, which consists of rotator cuff muscles, with minimal activity in the middle and posterior deltoid.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권1호
• /
• pp.26-32
• /
• 1993

The loads exerted on electro-hydraulic servo system are classified into inertial, viscous, and spring load. The additional load called disturbances is also exerted on system but is generally not modeled. To deal with these kinds of loads, it is necessary to maintain the continuous signal transfer, so we can construct compensator to satisfy control specifications using feedback signal such as displacement, velocity, acceleration and pressure known as state variables. In case of controlling the speed of hydraulic motor, we must keep up robust performance for the various loads and disturbances acted on the system. However, the load flow rate in the valve is characterized by nonlinearity so that traditional theory of linear control could not be expected to give the desired performance. In this paper, it is shown that speed controller of hydraulic motor gives a good command following and disturbance rejection performance by applying sliding mode theory as a way of robust control to the nonlinearity, variation of loads and disturbances.

• 드라이브 ㆍ 컨트롤
• /
• 제18권3호
• /
• pp.1-7
• /
• 2021

In a hydraulic control system, since a hydraulic cylinder drives a relatively large mass of an object, an external load force acts as a disturbance on the control performance of the system. Additionally, as the hydraulic system is used for a long period, there are disturbances that occur gradually, such as a drop in supply pressure because of abrasion of the pump, oil leakage from a valve, and oil leakage from a cylinder. In this study, a state feedback controller based on a linearization technique is applied. To prevent the performance degradation of the controller from the load disturbance, an Extended Luenberger observer (ELO) is used for the Extended system. The case of using the proportional controller, which is a representative linear controller, and the result of using the controller designed in this study are compared and reviewed through simulation. Also, we propose an experimental gain-setting method for a state feedback controller that can be used at industrial sites, and examine how the stability and control performance of the system changes because of the disturbance inputs through the experimental results.

• 전력전자학회논문지
• /
• 제13권3호
• /
• pp.171-178
• /
• 2008

본 논문에서는 압력예측기법과 직접 순시토크 제어기법을 통한 유압펌프용 SRM의 압력제어 구동시스템을 제안하였다. 일반적으로 유압 펌프 시스템은 유압센서의 응답성으로 인하여 제어시스템의 시지연이 비교적 길어지게 되며, 이러한 시간지연은 PI 또는 PID 제어 구조에서 장시간의 진동과 불안정화를 만들기 쉽다. 본 논문에서는 시간 지연문제를 해결하고 리플이 없는 압력제어를 위하여 스미스 예측기(simth predictor)를 통한 지연보상과 직접 순시토크제어기법(Direct Instantaneous Torque, 이하 DITC)을 적용하였다. 제안된 제어 방식은 펌프와 센서간의 기구적 문제에 의한 지연문제 해결과 안정성을 확보하고, 펌프 압력제어의 동특성을 향상시키며 전류(轉流, commutation) 구간에서 균일한 토크를 발생시켜 토크 리플을 억제하기 위함이다. 제안된 제어방식은 시뮬레이션과 실험을 통하여 효용성을 검증하였다.

• 항공우주시스템공학회지
• /
• 제15권5호
• /
• pp.98-105
• /
• 2021

본 연구에서는 우주발사체용 복합재 산화제탱크의 구조 강건성을 검증하기 위해 수행된 정하중시험 결과를 제시하였다. 먼저, 복합재 산화제탱크 정하중시험에 사용된 시험장비를 소개하고, 복합재 산화제탱크가 만족해야 하는 시험 요구도를 설명하였다. 그리고, 정하중 시험치구, 유압, 제어장비, 데이터획득장비로 구성되는 시험셋업 구성도를 제시하였고, 전단, 등가압축, 굽힘, 조합시험으로 구성된 복합재 산화제탱크 정하중 시험의 하중 프로파일을 제시하였다. 하중 제어의 결과로 시험하중 증가에 따른 각 하중부과기에서 입력하중과 출력하중 사이의 오차와 각 로드셀 A와 b 채널사이의 오차를 제시하여 본 시험의 신뢰성을 확인하였다. 정하중 시험 결과로, 각 시험에서 하중부과기의 하중은 허용 오차 범위 내에서 적절히 잘 제어되었으며, 시험시편도 요구 하중 내에서 파손이나 심각한 구조적 결함을 유발하는 좌굴은 발생하지 않는 것으로 확인되었다.

• 드라이브 ㆍ 컨트롤
• /
• 제13권2호
• /
• pp.1-9
• /
• 2016

In this paper, an elementary force fighting problem was investigated. The problem is encountered when a double-rod type EHA(electro-hydrostatic actuator) is combined with a single-rod type EHA to build a redundant actuator system with synchronized motion. When the rod-side chambers of the two different types of EHAs have the same effective piston areas and are simultaneously pressurized by an external load, the two EHAs behave identically, sharing the external load equally. However, when the piston head-side chamber of the single rod type EHA, having a larger effective area than the rod-side chamber, is pressurized by the external load, an abnormal force fighting between the two EHAs occurs, unless their pump speeds are properly decoupled. In this study, the output drive forces of each EHA were obtained from the cylinder pressure signals and applied to the position control for each EHA to maintain the balance between their pump speeds. Adding minor force difference feedback loops to the position control, the force fighting phenomena could be eliminated and steady state synchronization errors were reduced. The power consumption of the pumps also could be remarkably reduced, avoiding unnecessarily high load pressures to the pumps.