• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.64-71
• /
• 2023

If an impedance mismatch occurs between the source and load in a Radio Frequency transmission system, reflected power is generated. This results in incomplete power transmission and the generation of Reflected Power, which returns to the Radio Frequency generator. To minimize this Reflected Power, Impedance matching is performed. Fast and efficient Impedance matching, along with converging reflected power towards zero, is advantageous for achieving desired plasma characteristics in semiconductor processes. This paper explores Impedance matching by adjusting the Vacuum Variable Capacitor of an L-type Matching Module based on the trends observed in the voltage of the Phase Sensor and Electromotive Force voltage. After assessing the impedance matching characteristics, the findings are described.

• ETRI Journal
• /
• 제38권3호
• /
• pp.568-578
• /
• 2016

A wireless power transfer (WPT) system is usually classified as being of either a two-coil or four-coil type. It is known that two-coil WPT systems are suitable for short-range transmissions, whereas four-coil WPT systems are suitable for mid-range transmissions. However, this paper reveals that the two aforementioned types of WPT system are alike in terms of their performance and characteristics, differing only when it comes to their matching-network configurations. In this paper, we first find the optimum load and source conditions using Z-parameters. Then, we estimate the maximum power transfer efficiency under the optimum load and source conditions, and we describe how to configure the matching networks pertaining to both types of WPT system for the given optimum load and source conditions. The two types of WPT system show the same performance with respect to the coupling coefficient and load impedance. Further, they also demonstrate an identical performance in the two cases considered in this paper, that is, a strong-coupled case and a weak-coupled case.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.60-66
• /
• 1987

In this paper a fast matching method using subtemplate and search and down technique to reduce very heavy computational load of the conventional matching method, is presented The proposed method is spplied to an automatic target tracker in order to track one moving object in comparatively simple backgoriund. Experimental results show that istperformanced is not so degraded in spite of high computational reduction as that of the conventional matching method.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.63-71
• /
• 1988

In this paper, a fast matching method using hierarchical neighborhood search and subtemplate to reduce very heavy computational load of the conventional matching method, is presented. Some parameters of the proposed method are chosen so that an automatic target tracker to which it is applied can track one moving object well in comparatively simple background. Experimental results show that its performance is not so degraded in spite of high computational reduction over that of the matching method using 3-step search.

• 한국전자파학회논문지
• /
• 제29권7호
• /
• pp.484-490
• /
• 2018

본 논문은 13.56 MHz 임피던스 자동 정합 시스템 내의 VI 센서를 이용하여 전압 신호와 전류 신호를 측정하고, 부하임피던스를 계산하는 새로운 알고리즘에 대해서 기술하였다. 기존의 $50{\Omega}$ 교정 부하로 하던 방식에서 벗어나 임의의 복소수 교정 부하를 사용하여 에러율이 향상되는 알고리즘을 제안한다. 에러율은 $R_{IN}$ 평균 1 % 이하, $X_{IN}$은 평균 20 %이하 목표로 한다. 일차적으로 믹서를 사용하여 IF 주파수를 계산하여 에러율을 줄였고, 두 번째로 임의의 복소수 부하를 교정 부하로 사용하였을 때 에러율이 $R_{IN}$은 평균 2.7 %에서 평균 0.3 %로 감소하였고, $X_{IN}$은 평균 102 %에서 평균 18.3%까지 감소하였습니다.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.453-458
• /
• 2009

This paper presents two methods of designing a Broadband Impedance Matching (BIM) circuit for maximizing a power line communication (PLC) equipment (or Modem) signal injection into its load at any power line connection port. This optimal (BIM) circuit design is achieved in two phases: Butterworth gain function and Tchebycheff gain function. According to the comparison of simulation and practical results, the performances of two gain functions on BIM are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.807-809
• /
• 2003

본 논문에서는 회전형 압축기용 단상유도 전동기의 부하 matching 설계에 관하여 다루었다. 압축기 내부에서의 전동기 운전 온도를 알기 위해 압축기 실험을 행하였고 부하 토크를 추정하기 위해 전동기의 상온 및 실기조건 실험을 행하였다. 추정된 부하 토크를 적용하여 재설계 및 기존 전동기와 비교 검토하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.652-655
• /
• 2003

In this paper, step-down piezoelectric transformer is studied. The piezoelectric transformer, made of lead zirconate titanate solid solution ceramic, is operated by a fundamental contour-extensional vibration mode. The transformer of 14mm length, 14mm width and 4.5mm thickness was made up two shape(Type I and II). The resonant frequency (fr) is 144kHz and 128kHz at the load resistant of $7.5{\Omega}$ that is a similar to calculating matching impedance. The gain (G) obtained 0.19 and 0.08 at each resonant frequency, when applied input voltage is 25V. The temperature difference with the variation of load resistant was increased with increasing load resistant and was the lowest at $7.5{\Omega}$ near the matching of output impedance.

• ETRI Journal
• /
• 제38권5호
• /
• pp.962-971
• /
• 2016

A wireless power transfer (WPT) system is generally designed with the optimum source and load impedance in order to achieve the maximum power transfer efficiency (PTE) at a specific coupling coefficient. Empirically or intuitively, however, it is well known that a high PTE can be attained by adjusting either the source or load impedance. In this paper, we estimate the maximum achievable PTE of WPT systems with the given load impedance, and propose the condition of source impedance for the maximum PTE. This condition can be reciprocally applied to the load impedance of a WPT system with the given source impedance. First, we review the transducer power gain of a two-port network as the PTE of the WPT system. Next, we derive two candidate conditions, the critical coupling and the optimum conditions, from the transducer power gain. Finally, we compare the two conditions carefully, and the results therefore indicate that the optimum condition is more suitable for a highly efficient WPT system with a given load impedance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.474-478
• /
• 1999

Genetic algorithm is an efficient search method using principles of natural selection and population genetics. In conventional genetic algorithms, however, the size of gene pool should be increased to insure a convergency. Therefore, many memory spaces and much computation time were needed. Also, since child chromosomes were generated by chromosome crossover and gene mutation, the algorithms have a complex structure. Thus, in this paper, a compact stereo matching algorithm using a population-based incremental teaming based on probability vector is proposed to reduce these problems. The PBIL method is modified for matching environment. Since the Proposed algorithm uses a probability vector and eliminates gene pool, chromosome crossover, and gene mutation, the matching algorithm is simple and the computation load is considerably reduced. Even if the characteristics of images are changed, stable outputs are obtained without the modification of the matching algorithm.