• Journal of the Korea Computer Industry Society
• /
• v.5 no.4
• /
• pp.511-516
• /
• 2004

In this paper, we propose a low-power motion-estimation VLSI architecture based on systolic array using partial norms and spatial correlation. Our approach reduces computational load based on eliminating invalid block-matching points.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.15-18
• /
• 2002

Power supply technique for electrodeless lamps, especially Endura of Osram, is presented in this paper. The power supply uses a conventional power factor correction technique due to its proved performance. But in the inverter stage, resonant converter with parallel loading scheme is used to mitigate the variation of matching circuit characteristics by time varying load. Less performance but sufficient to predict future success compared to Osram's one is verified as a result of experiment of the prototype.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.13-16
• /
• 2004

Power supply technique for electrodeless lamps is presented in this paper. The power supply uses a conventional power factor correction technique due to its proved performance. But in the inverter stage, resonant converter with parallel loading scheme is used to mitigate the variation of matching circuit characteristics by time varying load. Experiment and performance comparison for both Endura md QL are performed and further study to commercialization are discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.859-864
• /
• 2001

For earthquake resistance design, a response modification factor is used to reduce the design strength and it reflects ductility, reserve strength, redundancy and damping effect. But this factor has not theoretical basis. In this study, two response modification factors are compared and analyzed for shear wall apartment building.; the one is introduced by ATC-19 Procedures, the other is suggested FEMA-273 and ATC-40 through nonlinear static analysis. For the results, ATC-19 procedure gives a reasonable estimation to R factor. But $R_{u}$ by using FEAM-273 and ATC-40 methods is estimated so small in case of a minor or moderate earthquake region. Due to this fact, response modification factor is smaller than suggested load criterion 3.0. So, it needs to decrease wall volume and reduce the global strength and system stiffness for proper ductile behavior matching to domestic load criterion.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.7
• /
• pp.872-880
• /
• 1999

This paper presents an algorithm that can calculate the evaluation index of power system from the transfer capability point of view. The algorithm adopts a successive linear programming skill to solve an optimal solution. Two indices which are transfer margin index and economic matching index have been developed. Prior to calculating these indices, Maximum Load supplying Capability(MLSC) and Economic Load Supplying Capability(ELSC) are utilized as basic data. For man-machine interface, graphical user interface has been implemented so that an unified software package PSTCP(Power System Transfer Capability Program) has been developed. KEPCO systems planned up to 2006 year have been tested to show effectiveness and usefulness of the PSTCP for power system planning stages.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.90-95
• /
• 2003

For the safety driving of an automobile which is become individual requisites, a new Neural Network algorithm which recognized the load vehicles in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of vehicles, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear image information is processed. 1-D LIPN hardware has been composed and various experiments with static and dynamic signals have been implemented.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1865-1867
• /
• 2000

The pulse power system has been widely used to many applications. such as E/P(Electrostatic Precipitator), DeNOx/DeSOx power system, ozon generator. etc. A pulse energy efficiency for load depend on the rising time, peak value, pulse duration, impedance matching. etc. The pulse generator generally required for short pulse duration, high peak value was forced to consider its size and economy. In this study, developing a compact pulse generator that applied for Cascading method to be made of two pulse transformer, we compared cascading voltage with no cascading one by applying the pulse energy to load.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.99-105
• /
• 2010

This paper discussed the theoretical simulation results for developing the blumlein pulsed power source and showed the circuit configuration and the discharge characteristics of the realistic manufactured pulsed power system. In the simulation, the output voltage characteristics at a load resistor showed the general impulse shape when the impedance of a single coaxial cable is matched with the that of a load resistor. In addition, it is confirmed that output values of the pulsed power can be easily controlled by the duplication of coaxial cables and the pulsed waveform showed the general impulse characteristics. Specifically, the inception discharge voltage in the gap distance of 5[mm] between needle and plane electrodes is about 20[kV] and which is lower than about 29[kV] in 9[mm] due to the difference of the reaching time of the inception voltage. Therefore, this paper showed that the output voltage of the blumlein pulsed power source can be easily controlled.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.583-591
• /
• 1999

this paper proposes a new approach for calculating the reliability indices of generation system, such as interruption frequency and duration, by using the moment matching technique Two separate expressions are derived, one for the loss of load expectation(LOLE) and the other for the loss of load frequency (LOLF). These expressions are combination of exponentials and are therefore easily integrable and can be readily evaluated. In this paper, the parameters of the distribution functions of the LOLE and LOLF are evaluated by using Genetic Algorithm and Complex Method, and the proposed approach is quite comparable with the other methods at the aspect of accuracy and efficiency.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.434-439
• /
• 2012

This paper presents a nontraditional laser power system in which an active compensated pulsed alternator (ACPA) drives a flashlamp directly without the use of capacitor groups. As a result, the volume of the laser system is decreased because of the high energy density of the ACPA. However, the difficulty in matching the output of the alternator with the laser flashlamp is a significant issue and needs to be well analyzed. In order to solve this problem, based on the theory for ACPA, the authors propose a simplified model for the system of ACPA with flashlamp load by the way of circuit simulation. The simulation results preliminarily illuminate how the performance of the ACPA laser power system is affected. Meanwhile, the simulation results can also supply a consultation for future ACPA laser power system design and control.