• Journal of Ocean Engineering and Technology
• /
• v.37 no.4
• /
• pp.164-171
• /
• 2023

Vibration and noise must be considered to maximize the efficiency of a yaw system and reduce the fatigue load acting on a wind turbine. This study investigated a method for analyzing yaw-system vibration based on the change in the load-duration distribution (LDD). A substructure synthesis method was combined with a planetary gear train rotational vibration model and finite element models of the housing and carriers. For the vibration excitation sources, the mass imbalance, gear mesh frequency, and bearing defect frequency were considered, and a critical speed analysis was performed. The analysis results showed that the critical speed did not occur within the operating speed range, but a defect occurred in the bearing of the first-stage planetary gear system. It was found that the bearing stiffness and first natural frequency increased with the LDD load. In addition, no vibration occurred in the operating speed range under any of the LDD loads. Because the rolling bearing stiffness changed with the LDD, it was necessary to consider the LDD when analyzing the wind turbine vibration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.520-523
• /
• 1989

MAP(Manufacturing Automation Protocol), Network Protocol for FA has 7 Layer Structure of OSI. Being an Application Layer Protocol for Communication Interfaced with the Actual Programmable Devices, MMS(Manufacturing Message Specification) Consists of Three Factors of Services, Interfaces, and Protocol. For Details, It Classifies with the Followings ; Connection/Context Management, Remote Variable Access, Semaphore Management, File transfer and Management, Program UP/DOWN Load, Remote Program Fxecution. In this Paper Designing MAP Network Station of Programmable Device, we Analyze the Protocol of MMS, and Realize the State Diagram of each Services and Propose the Model of MMS Function Call Instructions.

• 전기의세계
• /
• v.22 no.6
• /
• pp.24-32
• /
• 1973

When applying capacitors to distribution line, an effort must be made to determine the economic benefits resulting from the installation of a capacitor. There have been many papers and articles published on the economics of capacitors. Most of these are special cases, or have so many qualifications that they are not much use for other cases unless very careful attention is given to minute details. A general economic analysis on a distribution line is very complicated problem. Consequently, a diagram solution is illustrated for determining the economic condenser and applying resonably well for the distribution line with any load division.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.4
• /
• pp.197-204
• /
• 1988

A simple method that estimates the torque fluctuations in induction motor driven by CSI under steady state condition is presented and that uses the phasor diagram from the modified singlephase equivalent circuit. This method is also applied to evaluate the PWM and programmed do link modulation techniques for reducing the torque pulsations. The simplified calculations are compared with the exact digital solutions from machine D-Q equation. It is noted that the torque pulsations in induction motor driven by CSI are dependent upon the load condition unlike VSI.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.339-346
• /
• 2003

Molecular dynamic simulations of nano indentation on single-crystal silicon (100) surface were performed using diamond indentor. Silicon substrate and diamond indentor were modeled diamond structure with Tersoff potential model. Phase transformation of silicon, incipient plastic deformation, change of incident temperature distribution are investigated through the change of potential energy distribution, displacement-load diagram, the change of kinetic energy distribution and displacements of silicon atoms. Phase transformation is highly localized and consists of a high-density region surrounding the tip. Axial load linearly increased according to the indenting depth. Number of atoms with high kinetic energy increased at the interface between substrate and indentor tip.

• Journal of the Korean Society of Safety
• /
• v.14 no.2
• /
• pp.32-41
• /
• 1999

If the Leak-Before-Break (LBB) concept is applicable to the nuclear piping design, it is not necessary to consider the dynamic effect due to pipe rupture. Therefore, the construction cost can be significantly reduced by eliminating unnecessary pipe whip restraints and jet impingement devices. The objective of this paper is to develop the Piping Evaluation Diagram (PED) for efficient application of LBB concept to piping system at an initial piping design stage. For this purpose, the 3-D finite element analyses were performed to evaluate the crack stability. And the stress-strain curve based on the pipe material tests were used to calculate the detectable leakage crack length. Finally, the present PED which was composed as a function of NOP load and allowable SSE load, was developed for an application of LBB concept to the safety injection and shutdown cooling line in Korean Next Generation Reactor (KNGR).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.28-34
• /
• 2007

In design stage of vehicles, the application of virtual durability analysis techniques enables us to cut down the necessary time and cost to carry out various physical experiments. In this study, computer simulations of vehicle suspensions were carried out with DADS program including component flexibility, and the durability analysis of vehicle components was executed with MSC/Fatigue program using the load history obtained from vehicle dynamic simulation. Driving test of a vehicle was also carried out to obtain precise input data for the durability analysis, and the results of virtual durability analysis were compared to those of experiments.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.279-282
• /
• 2004

This paper presents load torque observer that is used to deadbeat load torque observer in the induction motor position control system. The simulation has been obtained by simulink. A digital control is composed by trigger method in the continuous block diagram. The results show that proposed system has good effectiveness for the disturbance in induction servo motor system.

• 전기의세계
• /
• v.22 no.1
• /
• pp.42-51
• /
• 1973

The contriving equivalent circuit of single phase induction motor which does not separate the primary leakage reactance and the secondary leakage reactance by the revolving field theory, and the graphically calculating method of the characteristics with T-type circle diagram of three phase induction motor which does not suppose the primary leakage reactance can be drawn up only by the no load test, the lock test, and measuring the resistance of stator winding are suggested in this paper. The method which can calculate the parameters of the equivalent circuit and the characteristics with no load test, lock test and measuring resistance of stator windings is suggested in this paper. Considered the exciting current in lock test, we could calculate very accurate characteristics of the single phase induction motor.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.554-556
• /
• 2005

Distribution Automation System (DAS) will provide supervision and remote control of switches and reclosers such as pole pounted switches and pad-mounted switchgears on high voltage distribution line. Kepco had developed basic function such as remote monitoring, remote control, remote measuring and remote setting at first. As a next step, Kepco has been developed diverse application programs such as single line diagram drawing program, relay coordination program, feeder reconfiguration program, over load elimination program, bad data detection program, section load management program, fault processing program and so on. Kepco is examining to develop more powerful functions for special specification of foreign distribution automation system. This paper explains what is the target for overseas DAS market.