• 대한토목학회논문집
• /
• 제34권6호
• /
• pp.1667-1676
• /
• 2014

강합성 바닥판은 두 방향의 휨 강성이 다르기 때문에 직교이방성의 성질을 가진다. 강합성 바닥판의 휨 강성비는 활하중 모멘트에 영향을 미친다. 비충전 강합성 바닥판의 휨 강성비는 메인 베아링 바 간격과 직접적인 관계를 가지고 있어 메인 베아링 바 간격과 형상비 영향이 고려된 하중분배 계수식에 대한 연구가 필요한 것으로 판단된다. 본 연구에서는 휨 강성비를 고려하는 AASHTO LRFD Bridge Design Specification에 의한 비충전 강합성 바닥판의 활하중 모멘트를 평가하고 비충전 강합성 바닥판의 하중분배 계수식을 제안하고자 한다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.133-138
• /
• 2008

본 연구에서는 대공간구조물의 기본적인 동적특성을 가지고 있으며 동시에 가장 간단한 구조이기도 한 아치에 납-고무면진 장치를 적용하여 지진거동을 분석하였다. 대공간구조물의 지진거동은 일반적인 골조구조물의 지진거동과 달리 수평지진에 의하여 수직방향으로 큰 지진응답이 나타나고 있다. 면진장치를 대공간 구조물에 적용할 경우에 수평지진하중에 의하여 수평방향 지진응답이 저감되는 것은 물론 면진장치의 수직강성으로 인하여 수직응답도 현저하게 저감되는 것을 알 수 있었다.

• 한국방재학회 논문집
• /
• 제1권1호
• /
• pp.81-90
• /
• 2001

2경간 연속 철도교의 종방향 거동에 영향을 미치는 여러 인자들에 대해서 연구하였다. 그 인자들로는 교각 강성의 크기, 교각의 높이, 교각기초의 크기와 교각받침의 강성을 변화시켜 그에 따른 변화양상을 살펴보았다. 그 결과 고정단 교각에서의 여러 인자들의 변화에 따른 종방향 거동의 변화가 가동단 교각에서의 변화에 따른 영향보다 크다는 사실을 확인할 수 있었다. 또한, 받침강성을 변화시켜서 종방향 거동을 제어하는 것이 다른 인자들을 변화시키는 것보다 더 경제적이라 할 수 있다.

• 한국지진공학회논문집
• /
• 제27권4호
• /
• pp.181-186
• /
• 2023

In this study, considering the expansion/contraction behavior of the upper structure at all times and the abnormal behavior of the receiving friction elements that allow horizontal movement during earthquakes, a port receiving test body simulating the protrusion of the friction elements was created and the modulus performance was evaluated. In order to confirm the influence of the friction element's projection, the friction element's degree of separation was divided into four stages, and the shear behavior of the test specimen and the friction coefficient were confirmed. As a result of the experiment, it was found that the friction load increases as the protrusion degree of the friction element increases. On the other hand, as the degree of protrusion of the coefficient of friction increases, the coefficient of friction also increases. It was confirmed that damage to the friction elements during use increases the coefficient of friction, hinders smooth expansion and contraction of the upper structure, and causes stress concentration at the fixed-end support.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.745-757
• /
• 2023

In order to study the fatigue performance of the flat steel plate-lightweight aggregate concrete hollow composite bridge slab subjected to fatigue load, both static test on two specimens and fatigue test on six specimens were conducted. The effects of the arrangement of the steel pipes, the amplitude of the fatigue load and the upper limit as well as lower limit of fatigue load on failure performance were investigated. Besides, for specimens in fatigue test, strains of the concrete, residual deflection, bending stiffness, residual bearing capacity and dynamic response were analyzed. Test results showed that the specimens failed in the fracture of the bottom flat steel plate regardless of the arrangement of the steel pipes. Moreover, the fatigue loading cycles of composite slab were mainly controlled by the amplitude of the fatigue load, but the influences of upper limit and lower limit of fatigue load on fatigue life was slight. The fatigue life of the composite bridge slabs can be determined by the fatigue strength of bottom flat steel plate, which can be calculated by the method of allowable stress amplitude in steel structure design code.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.461-472
• /
• 2015

The existence of initial imperfections in manufacturing or assembly of double-layer space structures having hundreds or thousands of members is inevitable. Many of the imperfections, such as the initial curvature of the members and residual stresses in members, are all random in nature. In this paper, the probabilistic effect of initial curvature imperfections in the load bearing capacity of double-layer grid space structures with different types of supports have been investigated. First, for the initial curvature imperfection of each member, a random number is generated from a gamma distribution. Then, by employing the same probabilistic model, the imperfections are randomly distributed amongst the members of the structure. Afterwards, the collapse behavior and the ultimate bearing capacity of the structure are determined by using nonlinear push down analysis and this procedure is frequently repeated. Ultimately, based on the maximum values of bearing capacity acquired from the analysis of different samples, structure's reliability is obtained by using Monte Carlo simulation method. The results show the sensitivity of the collapse behavior of double-layer grid space structures to the random distribution of initial imperfections and supports type.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.210-221
• /
• 2009

A new foundation type which is called Top-Base method has been used frequently in engineering practices in Korea. In this study, the settlement behavior of concrete Top-Base foundation on soft ground is investigated since the consolidation settlement of the embedding depth and the effect of footing dimensions are not included in current Korean criterion (2007). To obtain detailed information, the model tests of the Top-Base foundation are performed using the PLAXIS 3D finite element analysis. It is shown that in-situ measurements and finite element analysis of the behavior of foundations indicate that consolidation settlement is reduced up and bearing capacity of the foundation increases up to 50%~100%, compared to the primary non-treated ground. Based on this study, it is found that the Top-Base foundation prevents the lateral deformation of soft ground and reduces its negative dilatancy to the surface settlement, and that the foundation creates rather uniform stress distribution under it to increase its bearing capacity. It is also found that the total settlement of Top-Base foundation was highly dependent on the consolidation settlement and footing configurations.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.145-156
• /
• 2020

There are separate merits and demerits to wood and steel. The combination of wood and steel as a compound section is able to improve the properties of both and ultimately increase their final bearing capacity. The composite cross-section made of steel and wood has higher hardness while showing more ductility and the local buckling of steel is delayed or completely prevented. The purpose of this study is to investigate the behavior of composite columns enclosed in wooden logs and the hollow sections of steel that will be examined in a laboratory environment under the axial load to determine the final bearing capacity and sample deformation. In terms of methodology, steel sheet and carbon fiber reinforced polymer sheet (FRP) are tested to construct hollow rectangular sections and reinforce timber. Besides, the method of connecting hollow sections and timber including glue and screw has been also investigated. As a result, timber lumber enclosed with carbon fiber-reinforced polymer sheets in which fibers are horizontally located at 90° are more resistant with better ductility.

• 한국산학기술학회논문지
• /
• 제11권9호
• /
• pp.3599-3609
• /
• 2010

연안개발과 해안매립을 사용하여 개발된 새로운 도시 건설의 수요가 증가하면서 해안구조물과 고층구조물의 시공이 증가하는 추세이다. 이러한 구조물에서 수평력과 인발력을 받는 구조물의 기초의 적용이 증가하고 있으며, 특히 구조물에서 인발력에 효과적으로 저항하기 위한 기초형식으로 선단확장형말뚝의 사용이 증가하고 있는 실정이다. 압축력을 받는 기초에 관한 많은 연구들이 이루어지고 있으나, 선단확장형말뚝의 인발저항에 관한 연구는 미비한 상태이다. 따라서 본 논문에서는 국외 4개 현장을 대상으로 선단확장형말뚝을 시공하고 정재하시험을 실시하여 말뚝의 지지력 및 하중-변위특성과 주면마찰력을 고려한 하중분담을 고찰하였다. 또한 3차원 유한요소해석 및 이론에 의해 산정된 극한인발력과 현장시험의 극한인발력을 비교 평가하였다.

• Structural Engineering and Mechanics
• /
• 제52권3호
• /
• pp.507-523
• /
• 2014

Shell foundations have been employed as an alternative for the conventional flat shallow foundations and have proven to provide economical advantage. They have shown considerably improved performance in terms of ultimate capacity and settlement characteristics. However, despite conical shell foundations are frequently used in industry, the theoretical solutions for bearing capacity of these footings are available for only triangular shell strip foundations. The benefits in design aspects can be achieved through theoretical solutions considering shell geometry. The engineering behavior of a conical shell foundation on mixed soils was investigated experimentally and theoretically in this study. The failure mechanism was obtained by conducting laboratory model tests. Based on that, the theoretical solution of bearing capacity was developed and validated with experimental results, in terms of the internal angle of the cone. In comparison to the circular flat foundation, the results show 15% increase of ultimate load and 51% decrease of settlement at an angle of intersection of $120^{\circ}$. Based on the results, the design chart of modified bearing capacity coefficients for conical shell foundation is proposed.