• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제1권3호
• /
• pp.125-132
• /
• 2012

마이크로그리드(microgrid)의 독립적 운용방식(islanded operation mode)에서는 전력 공급량과 전력 수요량 사이의 균형을 맞추기 위하여 부하차단(load shedding) 기법이 사용된다. 기존의 부하차단 기법들은 부하의 요구량이 연속적인 값의 범위를 갖는다고 가정하였다. 그러나 일부 부하는 이산적인 정수 값을 사용하여 자신의 요구량을 나타낸다. 따라서 본 논문에서는 독립형 운용방식 환경에서 부하 요구량의 이산적인 특성을 고려한 부하차단 기법을 다중 에이전트 시스템을 이용하여 설계한다. 또한 시스템 구조, 에이전트 기능, 그리고 에이전트 간 통신 프로토콜을 추가로 정의 및 확장함으로써 시스템을 구현하였으며, 구현된 시스템을 기반으로 다양한 시나리오 환경에서의 실험을 통하여 그 성능을 증명하였다.

• 대한전기학회논문지
• /
• 제34권1호
• /
• pp.29-37
• /
• 1985

During Severe emergencies which result in the case of outage of large generator units, an automatic underfrequency protection scheme can prevent the system frequency from decaying and improve the system stability. This paper presents methods and results of a study on the optimum load shedding scheme which covering as follows. 1) Detail representation of governor model 2) Determination of optimum load shedding amount 3) Selection of action time settings of UFR 4) Comparsson of load shedding programs By this study, the optimum system operating method was recommended for reliable operation of power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.354-357
• /
• 1991

In the case of system operation, a line overload cause damage to spread an whole range of power system. Of the theorems on load shedding, this study applied power distribution theorem and load reduction theorem which are local load shedding method, which are not affected by the magnitude of the power system and need not a large memory capacity and computation time. In this paper, we treat the problem of overload when power system occurred to fatal fault. Especially, there is the special case that local load shedding theorem is not always solved. Therefore, we introduce a solved device of the problem and construct the expert system of expanded local load shedding. Because proposed method uses the merits of expert system, in the case of system operation, the system operator don't embarrass to fatal fault and promptly deals with.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.121-122
• /
• 2002

When a power system experiences a serious disturbance on insufficient power, the system frequency may drop. For system frequency will be maintain standard value, under_frequency relay will reconstruct balance of power and load by load shedding. Currently load shedding scheme is due to establishment plan by fixed scenario. Where compare current scheme with past scheme, system frequency should be recovered by load shedding using rate of frequency decline. This paper suggests the dynamic load shedding scheme by using the rate of change of frequency when The Korea Electric power system is happened the large disturbance.

• KIEE International Transactions on Power Engineering
• /
• 제4A권2호
• /
• pp.73-78
• /
• 2004

This paper proposes a framework for determining the minimum load shedding for restoring solvability. The framework includes a continuation power flow (CPF) and an optimal power flow (OPF). The CPF parameterizes a specified outage from a set of multiple contingencies causing unsolvable cases, and it traces the path of solutions with respect to the parameter variation. At the nose point of the path, sensitivity analysis is performed in order to achieve the most effective control location for load shedding. Using the control location information, the OPF for locating the minimum load shedding is executed in order to restore power flow solvability. It is highlighted that the framework systematically determines control locations and the proper amount of load shedding. In a numerical simulation, an illustrative example of the proposed framework is shown by applying it to the New England 39 bus system.

• 전기학회논문지P
• /
• 제53권3호
• /
• pp.103-109
• /
• 2004

This paper has presented, taking an example of a gas separation plant, dynamic analysis on frequency decline caused by the over-loading at the generator and the knee point causing voltage instability due to reactive power required by re-acceleration of large induction motors, resulting in phenomena of failure in the conventional frequency load shedding. In order to resolve the voltage instability problem, a design of load shedding system employing under-voltage relays has been proposed to the industrial power system containing large induction motors in addition to the conventional load shedding employing frequency relays. For the purpose of dynamic analysis, models of gas turbine and governor, synchronous generator, brushless exciter, and induction motor are introduced.

• Journal of Computing Science and Engineering
• /
• 제5권4호
• /
• pp.294-304
• /
• 2011

Enhancing continuous queries over data streams with temporal functions and predicates enriches the expressive power of those queries. While traditional continuous queries retrieve only the values of attributes, temporal continuous queries retrieve the valid time intervals of those values as well. Correctly evaluating such queries requires the coalescing of adjacent timestamps for value-equivalent tuples prior to evaluating temporal functions and predicates. For many stream applications, the available computing resources may be too limited to produce exact query results. These limitations are commonly addressed through load shedding and produce approximated query results. There have been many load shedding mechanisms proposed so far, but for temporal continuous queries, the presence of coalescing makes theses existing methods unsuitable. In this paper, we propose a new accuracy metric and load shedding algorithm that are suitable for temporal query processing when memory is insufficient. The accuracy metric uses a combination of the Jaccard coefficient to measure the accuracy of attribute values and $\mathcal{PQI}$ interval orders to measure the accuracy of the valid time intervals in the approximate query result. The algorithm employs a greedy strategy combining two objectives reflecting the two accuracy metrics (i.e., value and interval). In the performance study, the proposed greedy algorithm outperforms a conventional random load shedding algorithm by up to an order of magnitude in its achieved accuracy.

• 한국공간정보시스템학회 논문지
• /
• 제12권1호
• /
• pp.18-27
• /
• 2010

u-GIS환경에서 GeoSensor를 기반으로 하는 GeoSensor 환경은 다양한 센서들로부터 수집한 동적인 데이터와 기존 GIS인 정적인 지형지물 정보의 융합을 요구한다. 이 환경의 핵심인 GeoSensor는 넓은 지역에 산발적으로 분포하며, 다양한 크기의 데이터를 끊임없이 수집한다. 따라서 Data Stream Management System(DSMS)은 제한된 메모리로 인하여 저장 공간을 초과하는 문제가 발생한다. 이를 해결하기 위해 다양한 부하제한 기법들이 활발히 연구되고 있다. 부하제한 기법에는 크게 랜덤부하제한 기법과 의미적부하제한 기법, 샘플링 기법으로 분류된다. 랜덤부하제한 기법은 무작위로 데이터를 선택하여 삭제하고, 의미적부하제한 기법은 데이터의 우선순위를 부여하여 우선순위가 낮은 데이터부터 삭제한다. 샘플링 기법은 통계적인 연산을 이용하여 샘플링 비율을 산정하고 이를 토대로 부하를 제한한다. 그러나 기존 기법들은 공간적 특성을 전혀 고려하지 않기 때문에 공간 질의의 정확도를 감소시키는 문제를 갖는다. 본 논문은 GeoSensor 환경에서 DSMS에 발생하는 과부하 발생을 제한하고 공간 질의의 정확도를 향상시키기 위해 선-필터링을 이용한 후-부하제한 기법을 제안한다. 본 기법은 선-필터링을 통하여 스트림 큐에 불필요하게 가중되는 부하를 1차적으로 제한하며, 과부하 발생 시 공간 질의 결과 정확도를 보장하기 위하여 공간 중요도와 데이터 중요도를 고려하여 후-부하제한을 수행한다. 이 기법을 이용하여 부하제한 수행 횟수를 효과적으로 감소시켰고, 공간 질의의 정확도를 향상시켰다.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.371-377
• /
• 2005

Congestion problems of transmission lines are very important research issues in power system operations. Load curtailment is one of the ways to solve congestion problems by a major contingency. A systematic and effective mechanism for load shedding has been developed by investigating congestion distribution factors and the direct load control program. In this paper, a load shedding algorithm using linear programming for congestion problems by a major contingency is presented. In order to show the effectiveness of the proposed algorithm, it has been tested on the 6-bus sample system and the power system of Korea, and their results are presented.

• 대한전기학회논문지
• /
• 제44권3호
• /
• pp.270-273
• /
• 1995

This paper proposes an optimal load shedding algorithm by which the system loss can be minimized when the load shedding is unavoidable in case of severe contingency such as the outage of key generators or lines. Shedding load .DELTA.S = .DELTA.P + J.DELTA.Q(MVA) is performed on the weakest bus (on the view of voltage stability), step by step, by the priority of the I.DELTA. = SQRT(.lambda.$\_$P/$\^$2/ + .lambda.$\_$Q/$\^$2/) index given for each load bus, where .lambda.$\_$P/ and .lambda.$\_$Q/ are the sensitivity indices representing the system loss variation versus active and reactive power change of the bus load bus. All loads are assumed to be constant power loads for convenience. A 5 bus sample system proves the effectiveness of the algorithm proposed.