• 수산해양기술연구
• /
• 제21권2호
• /
• pp.142-150
• /
• 1985

1. 반구형 각의 분포 및 집중하중에 의한 좌굴응력 해석은 변형된 각의 형상에 따라 타원체 각의 응력으로 해석함이 타당하다. 2. 일정 한계이상의 형상계수를 갖는 반 구형각에 대하여서는 재료상수를 형상계수의 승수로 고려한 수정된 임계좌굴 하중으로 탄소성 좌굴을 판정함이 더 양호한 결을 준다. 3. 탄소성 좌굴에 있어서 소모된 소성변형 에너지를 계산하기 위하여 항성변형 에너지를 계산하기 위하여 항상선를 따르는 에너지법을 이용하면 양호한 결과를 얻을 수 있다.

• 한국지반신소재학회논문집
• /
• 제2권2호
• /
• pp.13-24
• /
• 2003

본 논문에서는 유한요소해석을 통해 기초지반의 강성과 상재하중이 블록식 보강토 옹벽에 미치는 영향을 고찰한 내용을 다루었다. 이를 위해 기초지반의 강성과 상재하중의 위치를 변화시키며 매개변수 연구를 수행하였으며 해석결과에서는 벽체의 변위와 보강재의 유발인장력은 기초지반의 강성이 감소함에 따라 증가하는 것으로 나타났다. 한편, 해석결과에 따르면 현재 설계기준에서 적용되고 있는 상재하중 처리 방법은 경우에 따라서 상재하중의 영향을 지나치게 과대평가 하는 것으로 나타났으며 상재하중이 보강영역에 근접하여 작용할 경우 외적안정성 검토시 주의를 요하는 것으로 나타났다. 본 논문에서는 본 연구를 통해 얻어진 결과가 실무적 측면에서 의미하는 바를 심도 있게 고찰하였다.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.23-29
• /
• 2017

Mechanical properties and hardness distributions in arc brazed joints of Dual phase steel using Cu-Al insert metal were investigated. The maximum tensile shear load was 10.4kN at the highest brazing current. It was about 54% compared to tensile load of base metal. This joint efficiency is higher than that of joint of DP steel using Cu-based filler metals which are Cu-Si, Cu-Sn. Fracture positions can be divided into two types. Crack initiation commonly occurred at three point junction among upper sheet, lower sheet and the fusion zone. However crack propagations were different with increasing the brazing current. In case of the lower current, it instantaneously propagated along with the interface between fusion zone and upper base material. On the other hand, in case of higher current, a crack propagation occurred through fusion zone. When the brazing current is low (60, 70A), the interface shape is flat type. However the interface shape is rough type, when the brazing current is high (80A). It is thought that the interface shapes were the reason why the crack propagations were different with brazing current. The interface was the intermetallic compounds which consisted of $(Fe,Al)_{0.85}Cu_{0.15}$ IMC formed by crystallization at $1200^{\circ}C$during cooling. Therefore the maximum tensile shear load and the fracture behavior were determined by a interface shape and effective sheet thickness of the fracture position.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.818-839
• /
• 1996

The strain gage, holographic and photoelastic analysis etc. have been used for stress analysis of prosthesis, orthodontic or orthopedic appliances and filling materials. But these methods has some limitation in analyzing the internal stress. The Finite Element Analysis has been proved to compensate this defect and widely used in this area. The purpose of this study was to compare the stress distributions of the various temporary filling methods being used in pulpotomy procedure. Three different models were designed according to temporary filling material and method: amalgam filling with ZOE base(Model I), amalgam filling with ZPC sub-base and ZOE(Model II), IRM filling only(Model III). The results of the experiment were as follows: 1. In model I under the load case 6 and 1, the significant stress was shown to be concentrated on the buccal portion of crown. 2. Model II showed the similar pattern of stress distribution to Model I. 3. In model III under load case 2, the stress was mainly distributed on the buccal cusp tip and buccal margin of filling material. In same model under the load case 3, the stress was distributed on the lingual cusp tip. 4. Based on the above data, IRM can be assumed to have advantage over the other tested materials in reducing the incidence of crown fracture by localized the stress within the filling materials.

• 한국지반공학회지:지반
• /
• 제4권4호
• /
• pp.39-50
• /
• 1988

현재까지 사면의 안정해석은 거의 결정론적 방법에 의해서 도호사면을 대상으로 연구가 수행되어 왔다. 그러나 실제적으로 사면의 파괴형상은 대수나선, 복합직선, 정원형, Cycloid기선 등의 다양 한 형태를 나타내고 있다. 따라서 본 연구는 지하수위를 고려한 기류한 사면의 파괴형상을 대수나선으로 하고 하중과 흙의 강침정수의 확률변수분포를 정규분포, 대수정규분포 및 베타분포로 가정하여 사면의 파괴확률을 구했다. 그치고 사면안정설계에 이용되고 있는 안전률과 파괴확률과의 관계를 분석하여 허용안전률에 대한 신잡실를 판단하기 위하여 수행되었다. 그 결과로 동일한 안전률에 대해서 변리계수가 증가함에 따라서 파괴확률이 증가하므로 사면설계에 있어서 안전률보다 파괴덕률을 이용하는 것이 합리적이라고 생각된다. 또한 허용안전률은 현장 조건을 고려하여 결정하는 것보다는 강도정수의 변리계수에 의하여 결정하는 것이 더 타당하다고 판단된다.

• 지질공학
• /
• 제31권1호
• /
• pp.43-53
• /
• 2021

본 연구에서는 부동침하 영향을 고려하여 지진 하중을 받는 1,300 ton 규모의 스테인리스 배수지 구조에 대한 3차원 유한요소 해석을 수행하였다. 1,000 ton 규모 이상의 대용량에 대한 지진하중은 한국표준 규격 규정으로부터 확장하여 산정하였다. 부동침하가 발생한 배수지는 특히 지진하중에 대하여 구조적 거동에 중요한 영향이 발생할 수 있다. 다양한 하중 조합에 대하여 정상상태의 경우, 침하가 고려된 경우, 그리고 수평으로 보강된 경우에 대한 응력 및 변위 분포의 변화를 도출하였다. 수치해석 결과로부터 부동침하가 발생된 배수지는 지진하중 조합에 대하여 최대 변위가 크게 증가하게 됨을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.645-655
• /
• 2021

Performance-based reliability analysis is a practical approach to investigate the seismic performance and stochastic nonlinear response of structures considering a random process. This is significant due to the uncertainties involved in every aspect of the analysis. Therefore, the present study aims to evaluate the performance-based reliability within a stochastic finite element (FE) framework for reinforced concrete (RC) shear walls that are considered as one of the most essential elements of structures. To accomplish this purpose, deterministic FE analyses are conducted for both squat and slender shear walls to validate numerical models through experimental results. The presented numerical analysis is performed by using the ABAQUS FE program. Afterwards, a random-effects investigation is carried out to consider the influence of different random variables on the lateral load-top displacement behavior of RC members. Using these results and through utilizing the Monte-Carlo simulation method, stochastic nonlinear analyses are also performed to generate random FE models based on input parameters and their probabilistic distributions. In order to evaluate the reliability of RC walls, failure probabilities and corresponding reliability indices are calculated at life safety and collapse prevention levels of performance as suggested by FEMA 356. Moreover, based on reliability indices, capacity reduction factors are determined subjected to shear for all specimens that are designed according to the ACI 318 Building Code. Obtained results show that the lateral load and the compressive strength of concrete have the highest effects on load-displacement responses compared to those of other random variables. It is also found that the probability of shear failure for the squat wall is slightly lower than that for slender walls. This implies that 𝛽 values are higher in a non-ductile mode of failure. Besides, the reliability of both squat and slender shear walls does not change significantly in the case of varying capacity reduction factors.

• Tribology and Lubricants
• /
• 제40권4호
• /
• pp.133-138
• /
• 2024

This study evaluates the structural safety of wind turbine blades, analyzes the behavior of composite laminate structures with and without defects, and assesses surface erosion wear. The NREL 5 MW standard is applied to assign accurate composite material properties to each blade section. Modeling and analysis of the wind turbine blades reveal stable behavior under individual load conditions (gravity, motor speed, wind speed), with the web bearing most of the load. Surface erosion wear analysis in which microparticle impacts are simulated on the blade coating shows a maximum stress and maximum displacement of 14 MPa and 0.02 mm, respectively, indicating good initial durability, but suggest potential long-term performance issues due to cumulative effects. The study examines defect effects on composite laminate structures to compare the stress distribution, strain, and stiffness characteristics between normal and cracked states. Although normal conditions exhibit stable behavior, crack defects lead to fiber breakage, high-stress concentration in the vulnerable resin layer, and decreased rigidity. This demonstrates that local defects can compromise the safety of the entire structure. The study utilizes finite element analysis to simulate various load scenarios and defect conditions. Results show that even minor defects can significantly alter stress distributions and potentially lead to catastrophic failure if left unaddressed. These findings provide valuable insights for wind turbine blade safety evaluations, surface protection strategies, and composite structure health management. The methodology and results can inform the design improvements, maintenance strategies, and defect detection techniques of the wind energy industry.

• Journal of Ship and Ocean Technology
• /
• 제11권2호
• /
• pp.26-33
• /
• 2007

For the assessment of the retardation of fatigue crack propagation behavior due to overload, new FE analysis algorithms considering compressive residual stress redistribution near crack tip was proposed in this paper. The size of plastic zone near crack tip was obtained by elasto-plastic analysis and it was compared with Irwin's equation. The amount of residual stress redistribution was assessed by subsequent elasto-plastic analysis, and the difference of residual stress distributions between constant amplitude load and overload was obtained. In the analysis of fatigue crack propagation, the applied SIF range was evaluated by ASTM E647, and the effect of residual stresses on crack propagation was considered using the effective SIF concept. The test results of crack propagations were compared with the predicted data obtained by the analysis.

• Tribology and Lubricants
• /
• 제6권1호
• /
• pp.36-51
• /
• 1990

A parametric study of the thermal effects of a half-circumferential grooved journal bearings under aligned and misaligned conditions has been carried out by solving numerically the coupled Reynolds and energy equation system. Five different sets of boundary conditions for the energy equation have been used which include mixing between recirculating oil and inlet oil and a contraction ratio for the cavitation region. The effects of changes of the inlet oil temperature and pressure, the wall temperature and the L/D ratio have also been examined. For the range of parameters found in internal combustion engines, the mixing effectiveness at the groove and the resulting final mixture temperature have been found to be as important as the wall temperature and the heat transfer rate. The variability of the temperature, though, has been shown to smooth out the peaks of both pressure and friction during misaligned condition Distributions of friction and pressure in the oil are also examined which may be useful in attempts to reduce friction without reducing load. Results for an axial grooved bearing are also presentsed for comparision purpose.