• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.1
• /
• pp.55-61
• /
• 2020

Social infrastructure facilities that have been under construction since the country's high-growth period are undergoing rapid aging, and, thus, safety assessments of large structures such as bridge tunnels, which can be directly linked to large-scale casualties in the event of an accident, are necessary. It is difficult to construct economical and efficient wireless smart sensor networks that improve structural health monitoring (SHM) because the existing wire sensors have a short signal reach. However, low-power wide-area networks (LPWANs) are becoming popular within the Internet of Things, and enable economical and efficient SHM. In this study, the technology trends of a wireless measuring sensor based on LoRa LPWANs were investigated, and an installation and maintenance plan for this type of sensor is proposed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.569-574
• /
• 2018

This paper proposes and implements a LoRa-based emergency exit guide system which can direct the optimal refuge path accounting for the real state of the fires. Each 4-way emergency exit guide sign presents a right direction through one of four LED signs toward the possible exit dynamically calculated by the shortest path algorithm. We constructed a simulation environment with 8 spots of the emergency exit guide signs and 2 exits, which can simulate variant cases of fire accidents, and showed that the proposed algorithm can presents the right guidance for each emergency exit guide sign. We also evaluated the performances of LoRa-based wireless communications using a self developed communication module in the various indoor and outdoor environments. The proposed system can be applied to small and medium sized buildings as well as larger ones in terms of cost efficiency, in which there's no needs to invest for the complex equipments except only sensors and emergency exit guide signs.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.1
• /
• pp.70-76
• /
• 2011

LTE Re1-10 aims at peak. data rates of 1Gbits/s for the downlink and 500 Mbits/s for the uplink, which can be accomplished by not only wide spectrum but also advanced MIMO techniques such as precoded MIMO and cooperative relays. Considering some relays can have more direct signal paths than mobile stations do, LoS components are examined to build more efficient codebooks for Rician channels. The proposed codebooks perform better than the existing LTE codebooks as the criterium of LoS, K-factor increases. Conserving the advantages and max-min chordal distance of the existing LTE codebooks, the proposed ones also maximize the minimum chordal distances between codewords over Rician fading channels. Link-level simulation with LTE system parameters confirm the performance improvements as the value of K increases.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.61-64
• /
• 2015

As an edible coating, carnauba shellac wax (CSW) and lemongrass oil (LO) solution was prepared to extend the shelf life of 'Hongro' apples. During storage, there were significant differences in the populations of total aerobic bacteria, yeast, and molds between the coated apples and the control samples. The weight loss and vitamin C loss of apples coated with the CSW-LO solution were lower than those of the control. These results suggest that CSW-LO coating can be an effective method for improving quality of 'Hongro' apples.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.970-974
• /
• 2007

A mixer is a key component in the wireless communication systems. In this paper, we design a mixer which is used in a frequency modulated continuous wave(FMCW) radar system. The frequency sweep range of the radar is from 10 GHz to 11 GHz. The transmitted and received signals of the FMCW radar are applied to LO and RF ports of the mixer, respectively, but the frequency difference between the two signals, which is called "a beat frequency" is under a few KHz and depending on the distance to target. Thus the isolation between the LO and RF ports is very important factor to design this mixer. In this paper we propose a single balanced resistive mixer using GaAs MESFET for this application. We first design a single-ended type resistive mixer using a simulation tool, then design a balanced type to increase the LO-to-RF isolation of the mixer. We fabricated the mixer on the substrate of dielectric constant 10 and thickness 0.635 mm. The measured results show that the isolation and conversion loss of the mixer over the frequency band is 20dB and 10.5dB, respectively. The LO input power for operating the proposed mixer is +3dBm, which is lower than a general conventional mixer's LO power. The 1 dB compression point is 6dBm.

• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.247-257
• /
• 2003

This paper proposes a three-dimensional (3D) segmentation algorithm for extracting a diagnostic object from ultrasound images by using a LoG operator In the proposed algorithm, 2D cutting planes are first obtained by the equiangular revolution of a cross sectional Plane on a reference axis for a 3D volume data. In each 2D ultrasound image. a region of interest (ROI) box that is included tightly in a diagnostic object of interest is set. Inside the ROI box, a LoG operator, where the value of $\sigma$ is adaptively selected by the distance between reference points and the variance of the 2D image, extracts edges in the 2D image. In Post processing. regions of the edge image are found out by region filling, small regions in the region filled image are removed. and the contour image of the object is obtained by morphological opening finally. a 3D volume of the diagnostic object is rendered from the set of contour images obtained by post-processing. Experimental results for a tumor and gall bladder volume data show that the proposed method yields on average two times reduction in error rate over Krivanek's method when the results obtained manually are used as a reference data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.293-299
• /
• 2003

In this paper, we have proposed a high conversion and isolation characteristic V-band quadruple sub-harmonic mixer monolithic circuit which is designed and fabricated for the millimeter wave down converter applications. While most of the sub-harmonic mixers use a half of fundamental frequency, we adopt a quarter of the fundamental frequency. The proposed circuit is based on a sub-harmonic mixer with APDP(anti-parallel diode pair) and the 0.1 ${\mu}{\textrm}{m}$ PHEMT's (pseudomorphic high electron mobility transistors). Lumped elements at IF port provide better selectivity of IF frequency and increase isolation. Maximum conversion gain of 0.8 ㏈ at a LO frequency of 14.5㎓ and at a RF frequency of 60.4 ㎓ is measured. Both LO-to-RF and LO-to-IF isolations are higher than 50 ㏈. The conversion gain and isolation characteristic are the best performances among the reported quadruple sub-harmonic mixer operating in the V-band millimeter wave frequency thus far.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.247-251
• /
• 2007

이 논문에서는 기존의 기상관측 시스템인 AWS에 IP-USN 기술 중 하나인 6LoWPAN을 적용하여 대체 개발한 시스템의 구조, 결과 그리고 문제점 분석 내용을 주로 다루고 있다. IP-USN이 적용된 이번 시스템에서는 기존의 IPv4 및 IPv6 인프라와 상호운용 가능하며, 저렴한 개발 비용과 손쉬운 설치 방법으로 기존의 AWS 시스템과 동일한 성능을 보여주었으며, 하나의 AWS와는 달리 넓은 지역을 효과적으로 관측 할 수 있어 수집된 데이터 평균값에 신뢰도를 높여주었다. 그러나, IP-USN 기술을 적용하면서 여러 문제점이 발생하였고, 이를 분석 및 향후 과제를 위한 방법을 제시하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.275-278
• /
• 2002

본 논문에서는 한국의 전파환경을 도시 계획법에서 지정한 지역세분을 기초로 4개의 대분류와 8개로 소구분하여 Kor-231 모델을 제안하였다. 전파전파 특성을 측정하기 위해 슬라이딩 코릴레이션 기법을 이용한 대역확산 송${\cdot}$수신 방식으로 구현하여 수신전력, 평균 초과지연 그리고 RMS 지연확산을 가장 도시계획적으로 개발된 공업 지역과 주거지역에서 직선 도로에 마이크로셀을 배치하여 도로를 따라 진행하는 LOS와 건물들로 둘러쌓인 N-LOS에서 측정된 데이터를 분석하여 한국의 전파환경에서 잘 적용됨을 확인 하였다.

• Korean journal of applied entomology
• /
• v.38 no.2
• /
• pp.123-128
• /
• 1999

Recently, entomopathogenic nematodes have received a considerable attention as biologicalcontrol agents. For in vitro cultivation, storage and transportation of nematodes, oxygen supply isextremely impotant due to its limited solubility and mass transfer problem. The oxygen uptake rates(OURs) of four different Steinernema species were measured in a 5L bioreactor at varying temperatures.The OURs of the Steinernema spp. were below 0.5 x mmolO'||'&'||' . min in the range of 13-17$^{\circ}$C. TheOURs (mmo102/L - min) of S. glaseri Dongrae and S. carpocapsae Pocheon strains were 0.4 x lo-', 0.75x lo-\ulcorner at 21$^{\circ}$C, 1.5 x lo-\ulcorner, 3.2 x 10-2 at 25"C, and 2.8 x lo-', 5.8 x lo-\ulcorner at 29"C, respectively. However,the OURs were not significantly altered by the agitation speed of 50-150 rpm. The specific oxygenuptake rates (qol) of S. glaseri NC, S. glaseri Dongrae, S. glaseri Mungyeong and S. carpocapsaePocheon strains were 0.3 x 0.5 x 0.3 x and 0.2 x mmolO~/cell min at 25"C,respectively. As the nematode size and temperature were increased, the qo, was also increased.the qo, was also increased.