• 제목/요약/키워드: Lithium niobate ($LiNbO_3$)

검색결과 47건 처리시간 0.023초

Characteristics of Sŏlc Filters in X(2) Nonlinear Photonic Crystal

  • Kee, Chul-Sik;Lee, Jong-Min;Lee, Yeung-Lak
    • Journal of the Optical Society of Korea
    • /
    • 제11권3호
    • /
    • pp.130-132
    • /
    • 2007
  • The characteristics of $S\breve{o}lc$ filters in $X^{(2)}$ nonlinear photonic crystals, periodically poled lithium niobate ($LiNbO_3$), were investigated by the Jones matrix method. The transmittance increases and the full width half maximum of the filter becomes narrow as the duty ratio increases. However, the filtering wavelength does not change. The transmittance at the filtering wavelength is over 95% when the duty ratio is larger than 0.35.

광프로세서를 위한 효율적인 제어회로 설계 및 검증 (A Design and Verification of an Efficient Control Unit for Optical Processor)

  • 이원주
    • 전자공학회논문지CI
    • /
    • 제43권4호
    • /
    • pp.23-30
    • /
    • 2006
  • 본 논문은 $LiNbO_3$ 광스위칭 소자를 이용한 광컴퓨터 시스템인 SPOC(Stored Program Optical Computer)의 제어 동작의 문제점을 개선한 회로를 설계하고 검증한다. SPOC의 메모리는 DLM(Delay Line Memory) 구조이고, 오퍼런드가 필요 없는 명령어도 메모리 접근 과정을 수행하기 때문에 메모리 접근에 많은 시간이 소요되는 문제점이 있다. 또한 원하는 연산만을 선택하여 수행할 수 없기 때문에 산술논리장치에서 불필요한 연산이 많이 수행된다. 따라서 본 논문에서는 오퍼런드를 찾기 전에 미리 명령어를 해독함으로써 오퍼런드가 필요 없는 명령어의 메모리 접근을 제거하도록 회로를 개선한다. 또한 산술논리장치내의 모든 연산회로에 오퍼런드를 보내지 않고 특정 연산회로에만 오퍼런드를 보냄으로써 불필요한 연산을 줄인다. 그리고 DIR(Dual Instruction Register) 구조를 제시하여 전체 프로그램의 실행시간을 최소화한다.

Measurements of Sub- and Super Harmonic Waves at the Interfaces of Fatigue-Cracked CT Specimen

  • Jeong, Hyun-Jo;Barnard, Dan
    • 비파괴검사학회지
    • /
    • 제31권1호
    • /
    • pp.1-10
    • /
    • 2011
  • Nonlinear harmonic waves generated at cracked interfaces are investigated both experimentally and theoretically. A compact tension specimen is fabricated and the amplitude of transmitted wave is analyzed as a function of position along the fatigued crack surface. In order to measure as many nonlinear harmonic components as possible a broadband Lithium Niobate ($LiNbO_3$) transducers are employed together with a calibration technique for making absolute amplitude measurements with fluid-coupled receiving transducers. Cracked interfaces are shown to generate high acoustic nonlinearities which are manifested as harmonies in the power spectrum of the received signal. The first subharmonic (f/2) and the second harmonic (2f) waves are found to be dominant nonlinear components for an incident toneburst signal of frequency f. To explain the observed nonlinear behavior a partially closed crack is modeled by planar half interfaces that can account for crack parameters such as crack opening displacement and crack surface conditions. The simulation results show reasonable agreements with the experimental results.

주기적으로 분극반전된 $LiNbO_3$에서 군속도 일치와 의사위상정합에 의한 펨토초 펄스의 효율적인 2차 조화파발생 (Effective frequency doubling of fs-pulse with simultaneous group velocity matching and quasi-phase matching in periodically poled lithium niobate)

  • Lee, Yu-Nan;S. Kurimura;K. Kitamura;Hun, No-Jeong;Sik, Cha-Myeong
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
    • /
    • pp.224-225
    • /
    • 2003
  • Since group velocity (GV) mismatch significantly limits the efficiency of nonlinear interactions such as second harmonic generation (SHG), several techniques have been developed to compensate GV mismatch. The simplest way to avoid the GV mismatch problem is to reduce the device length. However, it results in a poor trade-off between the SHG spectral bandwidth and the conversion efficiency. (omitted)

  • PDF

모드 잠금된 펄스 레이저와 연속 발진하는 반도체 레이저를 이용한 합주파수 생성 (Sum-frequency Generation Using a Mode-locked Pulsed Laser and a Continuous-wave Diode Laser)

  • 김현학;박남훈;염동일;차명식;문한섭
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.62-67
    • /
    • 2021
  • 본 연구에서는 모드 잠금된 ps-펄스 광섬유 레이저와 연속 발진하는 좁은 선폭의 반도체 레이저를 이용하여 주기적 분극반전된 LiNbO3(periodically poled lithium niobate; PPLN) 결정에서 합주파수 생성 연구를 수행하였다. 모드 잠금된 펄스 레이저는 중심 파장이 1560.7 nm이고 스펙트럼의 폭은 약 1.1 nm이며, 연속 발진 반도체 레이저는 중심 파장이 1551 nm이고 스펙트럼의 폭은 약 6 MHz로 동작한다. 합주파수 생성을 효과적으로 수행하기 위해서 하나의 단일 모드 광섬유를 이용하여 PPLN 결정 내부에서 두 펌프 광원을 공간적으로 완전히 중첩하였다. 모드 잠금된 펄스 레이저와 좁은 선폭의 연속발진 반도체 레이저에 의해서 모드 잠금된 펄스 형태의 778 nm인 합주파수 생성을 스펙트럼과 시간적인 변화로 확인하였다. 본 연구 결과는 주파수 제어가 가능한 광주파수 빗(optical frequency comb)을 이용한 광주파수 측정 및 고분해 레이저 분광 연구 등 다양하게 응용될 수 있을 것으로 기대된다.

Poling Quality Enhancement of PPLN Devices Using Negative Multiple Pulse Poling Method

  • Choi, Ju-Won;Ro, Jung-Hoon;Ko, Do-Kyeong;Yu, Nan-Ei
    • Journal of the Optical Society of Korea
    • /
    • 제15권2호
    • /
    • pp.182-186
    • /
    • 2011
  • A poling method using multiple negative voltage was introduced to fabricate periodically poled lithium niobate (PPLN) devices with quasi-phase matching (QPM) period of $12.9\;{\mu}m$ by utilizing an real-time visualization system. We also performed variation of the electric field during the poling. Two different conventionally used poling method, negative and positive single pulses, were used and the poling quality compared through microscopic images and far-field diffraction pattern analysis. Etched images on the +z and -z surfaces of PPLN showed that negative multiple pulse poling presented the highest periodicity in domain structures among the three methods. Duty ratio and its standard deviation were measured by analyzing far-field diffraction patterns. The newly introduced method of negative multiple pulse poling had duty ratio of 0.42 which was close to the ideal value of 0.50 and standard deviation of 0.020 that was about 3 times smaller than that of the other conventional methods.

PPLN 비선형 결정과 이중통과법을 이용한 DOFA 시스템에서 증폭된 연속발진형 파장가변 적외선 레이저광의 제 2고조파 발생 (Double-pass Second Harmonics Generation of Tunable CW Infrared Laser Beam of DOFA System in Periodically Poled LiNbO3)

  • 유길상;조재흥;고광훈;임권;정도영
    • 한국광학회지
    • /
    • 제19권3호
    • /
    • pp.229-236
    • /
    • 2008
  • 주기적으로 분극 반전된 비선형 결정 중에 하나인 PPLN(Periodically Poled MgO(5%) doped Lithium Niobate)과 수 W급의 고출력 연속발진형 파장가변 적외선 레이저 시스템인 DOFA(Diode Laser Oscillator & Fiber Amplifier) 시스템을 이용하여, 이 결정에서 펌핑광을 한번 통과시키는 단일통과와 두 번 통과시키는 이중통과에서의 효율적인 제2고조파 발생 조건을 실험적으로 구하였다. 단일통과에서는 최적의 위상정합온도 $108.9^{\circ}C$에서 최대 출력 2.45 W의 적외선(파장 = 1070 nm) 펌핑광을 사용하여 최대 245 mW의 녹색광원(파장 = 535 nm)인 제 2고조파를 만들었고, 이때의 주파수 변환 효율은 10%였다. 또한 제 2고조파 발생의 효율을 증가시키기 위해서 되 반사용 오목거울과 위상보정을 위한 쐐기유리판을 이용하여 이중통과의 제2고조파 발생장치를 구성하였다. 이때 최적의 위상정합온도 $108.5^{\circ}C$에서 최대 출력 2.45 W의 적외선(파장 = 1070 nm) 펌핑광을 사용하여 최대 383 mW의 녹색광원(파장 = 535 nm)인 제 2고조파를 만들었다. 이때의 변환 효율은 15.6%로써 단일통과에서의 제 2고조파 발생 효율보다 크게 증가함을 확인하였다.