• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1098-1103
• /
• 2020

본 논문은 리튬 이온 이차 전지의 전기적 실험 및 전기화학적 모델링을 통한 배터리 수명 상태(SOH)의 추정 방법을 다룬다. 배터리 전기적 노화 실험을 통하여 실제 배터리 수명 상태를 확인하기 위하여 전류 적산법을 사용한다. 전기적 실험에서 도출한 내부저항 값을 사용하여 SOH를 추정하며, 전기화학 모델링에서 사이클 수의 증가에 따른 SEI Layer의 변화를 통해 SOH를 추정한다. 실제 배터리 수명 상태를 포함한 세 가지 방법의 SOH 추정 방법에 가중치를 적용하여 새로운 SOH를 도출하며, 이는 전류적산법을 사용하여 구한 실제 값과의 오차를 줄여주어 추정 성능을 높인다.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1144-1148
• /
• 2002

We prepared the polyaniline (Pani) film and powder by chemical polymerization and doping with different dopants and also investigated the capability of Li//polyaniline cells after assembling. The oxidation/reduction potentials and electrochemical reaction of Li//polyaniline cells were tested by cyclic voltammetry technique. The Li//Pani-HCl cells with 10% and 20% conductors show a little larger specific discharge capacities than that without conductor. The highest discharge capacity of almost 50 mAh/g at 100th cycle is also achieved. However, Li//Pani-LiPF6 with 20% conductor shows a remarkable performance of ~90 mAh/g at 100th cycle. This is feasible value for using as the positive electrode material of lithium ion secondary batteries. It is also proved that the powder type electrode of Pani is better to use than the film type one to improve the specific discharge capacity and its stability with cycle.

• Asian Journal of Innovation and Policy
• /
• 제12권3호
• /
• pp.345-362
• /
• 2023

As the widespread adoption and proliferation of electric vehicles continue, the secondary battery market is experiencing rapid growth. However, lithium-ion batteries, which constitute a majority of secondary batteries, present high risks of fire and explosion. Solid-state batteries are thus garnering attention as the next-generation batteries since they eliminate fire hazards and significantly reduce the risk of explosions. Against this background, the study aimed to analyze research trends and provide insights by examining 2,927 domestic papers related to solid-state batteries over the past decade (2013-2022). Specifically, we used topic modeling to extract major keywords associated with solid-state batteries research and to explore the network characteristics across major topics. The changes in research on solid-state batteries were analyzed in-depth by calculating topic dominance by year. The findings provide an overview of the emerging trends in domestic solid-state battery research, and might serve as a valuable reference in shaping long-term research directions.

• 한국입자에어로졸학회지
• /
• 제15권4호
• /
• pp.127-137
• /
• 2019

Recently, high electrochemical performance anode materials for lithium ion secondary batteries are of interest. Here, we present silicon-carbon-graphene (Si-C-GR) composites for high performance anode materials of lithium ion secondary battery (LIB). Aerosol process and heat-treatment were employed to prepare the Si-C-GR composites using a colloidal mixture of silicon, glucose, and graphene oxide precursor. The effects of the size of the silicon particles in Si-C-GR composites on the material properties including the morphology and crystal structure were investigated. Silicon particles ranged from 50 nm to 1 ㎛ in average diameter were employed while concentration of silicon, graphene oxide and glucose was fixed in the aerosol precursor. Morphology of as-fabricated Si-C-GR composites was generally the shape of a crumpled paper ball and the Si particles were well wrapped in carbon and graphene. The size range of composites was about from 2.2 to 2.9 ㎛. The composites including silicon particles larger than 200 nm in size exhibited higher performance as LIB anodes such as capacity and coulombic efficiency than silicon particles less than 100 nm, which were about 1500 mAh/g at 100 cycles in capacity and 99% in coulombic efficiency, respectively.

• 전기화학회지
• /
• 제3권3호
• /
• pp.173-177
• /
• 2000

리튬 이차 전지의 성능은 부극으로 쓰이는 탄소재료의 표면의 미세 구조에 크게 의존한다. 본 연구에서는 이러한 표면 구조의 개질을 위해 유동상 화학증착법을 도입하여 금속 및 금속 산화물을 탄소재료 표면에 코팅하여 그 성능을 전기 화학적으로 평가하였다. 주석산화물을 코팅한 탄소 전극은 원래의 탄소 전극에 비해 용량의 상승을 나타내었으나 사이클이 진행됨에 따라 주석산화물이 코팅된 전지의 용량은 심각한 부피 변화에 의해 저하되어 사이클 수명이 감소되었다. 그러나, 부피 변화를 완화시켜주는 비활성 매트릭스 역할을 하는 구리를 주석 산화물 위에 코팅함으로 인해 부피 변화에 의한 용량 저하를 감소시킬 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.136-140
• /
• 1992

The purpose of this research is to develop the lithium secondary battery. This paper describes the preparation, electrochemical properties of nontstoichiometric(NS)-$V_6O_{13}$ and characteristics of Li/$V_6O_{13}$ secondary battery. NS-$V_6O_{13}$ was prepared by thermal decomposition of $NH_4VO_3$ under Ar stream of 140ml/min~180ml/min flow rate. And then, this NS-$V_6O_{13}$ was used for cathode active material. Cathode sheet was prepared by compressing the composite of NS-$V_6O_{13}$, acetylene black(A.B) and teflon emulsion (T.E). Characteristics of the test cell are summarised as follows. Oxidation capacity of NS-$V_6O_{13}$ was about 20% less than its reduction capacity. A part of NS-$V_6O_{13}$ cathode active material showed irreversible reaction in early charge-discharge cycle. This phenomena seems to be caused by irreversible incoporation/discoporation of lithium cation to/from NS-$V_6O_{13}$ host. Discharge characteristics curve of Li/$V_6O_{13}$ cell showed 4 potential plateaus. Charge-discharge capacity was declined in the beginning of cycling and slowly increased in company with increasing of coulombic efficiency. Energy density per weight of $V_6O_{13}$ cathode material was as high as 522Wh/kg~765Wh/kg.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.275-277
• /
• 2005

In a lithium-ion battery which is being used in many portable electronic goods, electrolyte is disaggregated and then the gas is happened when electric charging volt is over the 4.5V. So, the pressure on the safety valve is increased and electrolyte is leaked out in the cell. It leads to the risk of explosion. On the other hand, in the case which the battery is discharged excessively, the negative pole is damaged and the performance of the battery is deteriorated. The protection module of a lithium-ion battery is used for preventing such risk and the inspection system is needed to check the performance of such protection module. In this research, a PC-based auto inspection system is developed for the inspection of a battery protection module using Dallas chipset. In the inspection system, AVRl28 chip is used as a controller and the communication protocol is developed for the data communication between the protection module and the AVR128 chip. And GPIB interface is used for the control of measuring devices. Also, MMI environment is developed using LabView for convenient monitoring by the tester.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1695-1698
• /
• 2008

• 에너지공학
• /
• 제3권2호
• /
• pp.159-166
• /
• 1994

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 춘계총회 및 학술발표회
• /
• pp.16-17
• /
• 2002