• 전기화학회지
• /
• 제11권4호
• /
• pp.242-255
• /
• 2008

1991년 lithium-ion battery(LIB)가 상용화된 이후, 초기 전해질은 주로 lithium cobalt oxide($LiCoO_2$) 양극과 graphite 음극의 특성에 집중되어 연구되어 왔다. 또한 전극과 전해질 간의 적합성에 대한 다양한 연구들이 이들 간의 계면에서 활발히 진행되었다. 이후 Si, Sn 등의 비탄소계 음극소재와 3성분(Ni, Mn, Co)계, spinel, olivine 등의 양극 소재를 리튬 2차전지에 채용하려 함에 따라 기존 전해질 재료들도 많은 도전에 직면하게 되었다. 특히, 안전성 문제가 최근 심각하게 부각됨에 따라 전해질의 요구특성은 점점 복잡해지고 까다로워지고 있다. 본 고에서는 이러한 전극소재 변화에 따른 전해질 소재의 다양한 변화와 그 특성에 대하여 구성요소 별로 연구 및 개발 동향을 정리하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.30.1-30.1
• /
• 2011

Silicon is one of useful materials in various industry such as semiconductor, solar cell, and secondary battery. The metallic silicon produces generally melting process for ingot type or chemical vapor deposition (CVD) for thin film type. However, these methods have disadvantages of high cost, complicated process, and consumption of much energy. Electrodeposition has been known as a powerful synthesis method for obtaining metallic species by relatively simple operation with current and voltage control. Unfortunately, the electrodeposition of the silicon is impossible in aqueous electrolyte solution due to its low oxidation-reduction equilibrium potential. Ionic liquids are simply defined as ionic melts with a melting point below $100^{\circ}C$. Characteristics of the ionic liquids are high ionic conductivities, low vapour pressures, chemical stability, and wide electrochemical windows. The ionic liquids enable the electrochemically active elements, such as silicon, titanium, and aluminum, to be reduced to their metallic states without vigorous hydrogen gas evolution. In this study, the electrodeposion of silicon has been investigated in ionic liquid of 1-butyl-3-methylpyrolidinium bis (trifluoromethylsulfonyl) imide ([bmpy]$Tf_2N$) saturated with $SiCl_4$ at room temperature. Also, the effect of electrode materials on the electrodeposition and morphological characteristics of the silicon electrodeposited were analyzed The silicon electrodeposited on gold substrate was composed of the metallic Si with single crystalline size between 100~200nm. The silicon content by XPS analysis was detected in 31.3 wt% and the others were oxygen, gold, and carbon. The oxygen was detected much in edge area of th electrode due to $SiO_2$ from a partial oxidation of the metallic Si.

• 전기화학회지
• /
• 제3권4호
• /
• pp.219-223
• /
• 2000

구리-바나듐 산화물 양극을 이용하여 $(Cu_{0.5}V_2O_5)$으로 구성된 전 고상의 리튬이차박막전지를 제작하였다. 구리-바나듐 산화물 박막은 reactive DC magnetron sputtering을 이용하여 co-sputtering에 의해 제조하였고 Lipon고체전해질은 순수한 질소 분위기 하에서 RF 스퍼터링으로 제조하였다. XRD분석을 통해 구리-바나듐 산화물 박막이 비정질임을 확인하였고, EC:DMC(1:1 in IM $LiPF_5$)액체전해질을 사용한 반전지 구조에서 그 전기화학적 특성을 고찰하였다. Lipon고체전해질의 이온전도도는 $25^{\circ}C$에서 $1.02\times10^{-6}S/cm$를 나타내었고 전고상 박막전지는 $1.5V\~3.6V$의 전압구간, $50{\mu}A/cm^2$의 전류밀도에서 500싸이클까지 약 $50{\mu}Ah/cm^2{\mu}m$의 방전용량을 유지하였다

• 한국결정성장학회지
• /
• 제24권4호
• /
• pp.164-168
• /
• 2014

나트륨 유황 전지는 $350^{\circ}C$ 이상의 고온에서 작동하는 대용량 전지로 에너지 저장 시스템에 주로 사용된다. 전지는 음극 액체 나트륨과 양극 액체 유황 그리고 고체 전해질 베타 알루미나(${\beta}^{{\prime}{\prime}}$-alumina)로 구성되어 있다. 이 전지는 초기충방전 사이클에서 상당한 전압변화를 보이기 때문에 전지의 안정화를 위해 컨디셔닝 과정이 필요하다. 실험 결과 전지 전압 변화의 주요한 원인 중의 하나가 액체 나트륨과 고체 전해질과의 접촉 면적이 변하기 때문인 것을 알았다.

• 전기화학회지
• /
• 제13권3호
• /
• pp.186-192
• /
• 2010

흑연과 1-buthyl-2,3-dimethylimidazolium(BDMI)계 이온성 액체의 계면 반응을 이해하기 위하여 lithium bis(fluorosulfonyl)imide(LiTFSI)가 용해된 BDMI-TFSI 용액 중에서 전기화학 원자간력 현미경(electrochemical atomic force microscopy, ECAFM)을 이용하여 순환 전압전류법 전후에 있어서의 고배향성 열분해 흑연(highly oriented pyrolytic graphite, HOPG)의 표면을 in-situ로 관찰하였다. HOPG 전극에서 리튬의 가역적인 삽입과 탈리반응은 진행되지 않았으며, $BDMI^+$ 양이온의 삽입에 의한 blister의 형성 및 그라펜 층의 파괴만이 관찰되었다. 한편, $BDMI^+$ 양이온의 삽입 반응은 농도가 4.90 mol/kg인 LiTFSI-propylene carbonate(PC)를 15 wt% 함유하고 있는 BDMI-TFSI계에서는 일어나지 않았으며, 이 경우에는 가역적인 리튬의 삽입과 탈리반응이 진행 되었다. ECAFM 결과는 고농도의 PC계 용액이 solid electrolyte interface(SEI)를 형성함으로 인해 $BDMI^+$ 양이온의 삽입을 막는 매우 효과적인 첨가제임을 나타내었다.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.28-32
• /
• 2023

Recently, the use of stable lithium nanostructures as substrates and electrodes for secondary batteries can be a fundamental alternative to the development of next-generation system semiconductor devices. However, lithium structures pose safety concerns by severely limiting battery life due to the growth of Li dendrites during rapid charge/discharge cycles. Also, enabling long cyclability of high-voltage oxide cathodes is a persistent challenge for all-solid-state batteries, largely because of their poor interfacial stabilities against oxide solid electrolytes. For the development of next-generation system semiconductor devices, solid electrolyte nanostructures, which are used in high-density micro-energy storage devices and avoid the instability of liquid electrolytes, can be promising alternatives for next-generation batteries. Nevertheless, poor lithium ion conductivity and structural defects at room temperature have been pointed out as limitations. In this study, a low-dimensional Graphene Oxide (GO) structure was applied to demonstrate stable operation characteristics based on Li+ ion conductivity and excellent electrochemical performance. The low-dimensional structure of GO-based solid electrolytes can provide an important strategy for stable scalable solid-state power system semiconductor applications at room temperature. The device using uncoated bare NCA delivers a low capacity of 89 mA h g-1, while the cell using GO-coated NCA delivers a high capacity of 158 mA h g−1 and a low polarization. A full Li GO-based device was fabricated to demonstrate the practicality of the modified Li structure using the Li-GO heterointerface. This study promises that the lowdimensional structure of Li-GO can be an effective approach for the stabilization of solid-state power system semiconductor architectures.

• 전기화학회지
• /
• 제20권2호
• /
• pp.41-48
• /
• 2017

폴리올레핀 분리막의 내열성을 향상시키면서도 전기화학특성 개선을 위해 RF Magnetron Sputter기반으로 수십 나노미터 수준의 세라믹 층이 코팅된 내열 분리막을 제조하였다. 분리막 원단의 열적 손상없이 코팅 시간을 최소화하기 위한 증착 조건을 최적화 하였고, 이를 기반으로 제조된 내열 분리막의 물리적, 전기화학적 평가를 진행하였다. 약 20 nm의 $Al_2O_3$가 코팅된 Polypropylene(PP) 분리막은 원단 분리막 대비 통기 특성 (원단: 211.3 sec/100 mL, 코팅 분리막: 250.8 sec/100 mL)은 떨어졌으나, 열 수축율 (원단: 19.4%, 코팅 분리막: 0.0% @ $140^{\circ}C$ & 30 min), 전해액 Uptake(원단: 176%, 코팅 분리막: 190%) 및 이온전도도 (원단: 0.700 mS/cm, 코팅 분리막: 0.877 mS/cm)는 모두 향상되었다. 그 결과, 2032-type Half-cell($LiMn_2O_4/Li$)을 이용한 전기화학적 평가에서도, 향상된 율별 특성과 유사한 수명 특성을 나타내었다.

• 전기화학회지
• /
• 제14권2호
• /
• pp.92-97
• /
• 2011

In this study we have investigated the Li-ion coordination, thermal behavior and electrochemical stability of N-butyl-N-methyl-pyrrolidinium bis(trifluoromethanesulfonyl)imide ($Py_{14}TFSI$) with lithium bis(trifluoromethanesulfony)imide (LiTFSI) doping intended for use as electrolytes for lithium batteries. The ionic conductivity is reduced and glass transition temperature ($T_g$) increases with LiTFSI doping concentration. Also, the electrochemical stability increases with LiTFSI doping. A high LiTFSI doping could enhance the electrochemical stability of electrolytes for lithium batteries, whereas the decrease in the ionic conductivity limits the capacity of the battery.

• 전기화학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 2006

A new porous separator based on poly(vinyl chloride) (PVC)/poly(vinylidene fluoride-co-hexafluoro-propylene) (P(VdF-co-HFP)/poly(methyl methacrylate) (PMMA) was prepared by a phase inversion method. To enhance mechanical property, the membrane was stretched uniaxially at high temperature. Tensile strength and ionic conductivity were measured for various draw ratios. The tensile strength and ionic conductivity were increased with increasing draw ratio. The tensile strength of the separator reached 52MPa after stretching to draw ratio of 5, and the ionic conductivity of the separator was increased from $1.9Xs10^{-4}S/cm\;to\;4.6X10^{-4}S/cm\;at\;25^{\circ}C$. The stretched separator immersed in liquid electrolyte was electrochemically stable up to 4.7 V. The cell based on the stretched separator was maintained at about 99% of the initial discharge capacity after 10th cycle operation at 0.2C rate.

• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.279-284
• /
• 2021

The high theoretical specific capacity of lithium-sulfur (Li-S) batteries makes them a more promising energy storage system than conventional lithium-ion batteries (LIBs). However, the slow kinetics of the electrochemical conversion reaction seriously hinders the utilization of Li-S as an active battery material and has prevented the successful application of Li-S cells. Therefore, exploration of alternatives that can overcome the sluggish electrochemical reaction is necessary to increase the performance of Li-S batteries. In this work, an ionic liquid (IL) is proposed as a functional additive to promote the electrochemical reactivity of the Li-S cell. The sluggish electrochemical reaction is mainly caused by precipitation of low-order polysulfide (l-PS) onto the positive electrode, so the IL is adopted as a solubilizer to remove the precipitated l-PS from the positive electrode to promote additional electron transfer reactions. The ILs effectively dissolve l-PS and greatly improve the electrochemical performance by allowing greater utilization of l-PS, which results in a higher initial specific capacity, together with a moderate retention rate. The results presented here confirmed that the use of an IL as an additive is quite effective at enhancing the overall performance of the Li-S cell and this understanding will enable the construction of highly efficient Li-S batteries.