• Journal of Embryo Transfer
• /
• v.10 no.3
• /
• pp.183-191
• /
• 1995

This experiment was carried out to study the determination of survival of vitrified and thawed mammal follicular oocytes by FDA-test. Oocytes were divided into 3 groups according to attachment of cumulus cell. Group A oocytes were tightly surrounded by cumulus cell, group B oocytes were partially surrounded by cumulus cell, and group C oocytes were poorly surrounded by cumulus cell. Vitrification solution developed by our previous study (Kim et al, 1992) which consisted of permeable agent (20 % glycerol + 10 % ethylene glycol) and nonpermeable agent (30 % Ficoll + 10 % sucrose). Oocytes (7~10) loaded into 0.25 ml straw after 10 min equilibration were plunged into liquid nitrogen (- 196$^{\circ}C$) directly. The FDA-score of vitrified and thawed group A oocytes was higher in rat (4.2) than in rabbit (3.9), cow (3.8), mouse (3.4) and porcine (2.4), however that of cumulus cell was higher in rabbit (4.7) than in rat (4.1), cow (2.9), porcine (2.6) and mouse (1.4). The FDA-score of vitrified and thawed group B oocytes were 3.1 (cow), 2.9 (rabbit), 2.9 (mouse), 2.6 (rat) and 2.5 (porcine), respectively. However that of cumulus cell was higher in rabbit (3.7) than in porcine (2.6), rat (2.3), cow (1.7) and mouse (0.3). The FDA-score of vitrified and thawed group C oocytes was higher in mouse (4.1) than in cow (2.9), rabbit (2.6), rat (1.3) and porcine (1.1). As shown in the above results, The survival rates of oocytes were higher in group A than in group B and C except in mouse and cow. These results suggest that the survival of cumulus cell as well as follicular oocytes can be reliably judged by their fluorescence with FDA-test.

• Journal of Embryo Transfer
• /
• v.9 no.2
• /
• pp.173-180
• /
• 1994

The present experirnents on cryopreservation were carried out to investigate effect of solution toxicity, equilibration time and cell stages on the post-thaw survival of mouse morulae and blastocyst embryos cryopreserved by vitrification in EFS solution. The mouse embryos were exposed to the EFS solution in one step at room temperature, kept in the EFS solution during different period for toxicity test, vitrified in liquid nitrogen and thawed rapidly. After the mouse morulae embryos were exposed to EFS solution for 2 and 5 ruin. at room temperature and then they were washed in 0.5 M sucrose solution and basal mediurn(D-PBS + 10% FCS), they were cultured to examined cryoprotectant toxicity induced injury during exposure, most of embryos developed to expanded blastocysts(100 and 90.0%). However, when the exposure time was extended to 10 and 20 min, these development rates dropped dramatically in 10 ruin. (75.0%) and 20 ruin. (4.5%), respectively. When the compacted morulae were vitrified in EFS solution after equilibration for 2 and 5 min, the embryos have developed to normal blastocyst following thawing, washing and culture processes was 89.3 and 89.6%. However, when the exposure time was expanded to 10 ruin, this survival rate dropped to 68.8%. When the blastocyst were vitrified in EFS solution after equilibration for 2, 5 and 10 minutes, the survival rate of embryos which developed to normal blastocyst following thawing and culture processing were 58.5, 46.7 and 22.4%, respectively. The optimal time of equilibration of mouse morula and blastocysts in EFS solution seemed o be 2 and 5 ruin.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.37-43
• /
• 2007

We developed the equipment to measure the MTF(modulation transfer function) of an optical system for automatically inspecting the surface condition of an LCD substrate. We have made an object generator with USAF(United States Air Force) targets of three bar patterns and an integrating sphere, and an image analyzer with a 2 dimensional CCD(charge coupled device) and a relay lens. The MTF of the lens under test was obtained by correcting the measured CTF(contrast transfer function) which is the ratio of the contrast in the image of the USAF target to the contrast in the object. We have measured an optical system of F/13.65 (2.6x), the MTF are 30.6 % tangential plane and 26.1 % sagittal plane at 62.5 1p/mm.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.12
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.4
• /
• pp.161-168
• /
• 2001

Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.700-711
• /
• 2015

Sodium-cooled fast breeder reactors use liquid sodium as a moderator and coolant to transfer heat from the reactor core. The main hazard associated with sodium is its rapid reaction with water. Sodium-water reaction (SWR) takes place when water or vapor leak into the sodium side through a crack on a heat-transfer tube in a steam generator. If the SWR continues for some time, the SWR will damage the surface of the defective area, causing it to enlarge. This self-enlargement of the crack is called "self-wastage phenomena." A stepwise numerical evaluation model of the self-wastage phenomena was devised using a computational code of multicomponent multiphase flow involving a sodium-water chemical reaction: sodiumwater reaction analysis physics of interdisciplinary multiphase flow (SERAPHIM). The temperature of gas mixture and the concentration of NaOH at the surface of the tube wall are obtained by a numerical calculation using SERAPHIM. Averaged thermophysical properties are used to assess the local wastage depth at the tube surface. By reflecting the wastage depth to the computational grid, the self-wastage phenomena are evaluated. A two-dimensional benchmark analysis of an SWAT (Sodium-Water reAction Test rig) experiment is carried out to evaluate the feasibility of the numerical model. Numerical results show that the geometry and scale of enlarged cracks show good agreement with the experimental result. Enlarged cracks appear to taper inward to a significantly smaller opening on the inside of the tube wall. The enlarged outer diameter of the crack is 4.72 mm, which shows good agreement with the experimental data (4.96 mm).

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.738-742
• /
• 2003

In order to estimate the mass transfer characteristics of absorption into alcohol solution of aroma compounds such as cineol, myrecene and pinene which are major aroma compounds of rosemary, dimensionless Henry's constant in 70% ethyl alcohol concentration and aroma concentration with different ethyl alcohol concentration were analyzed. From the results of measurement of vapor phase concentration of aroma compounds with different ethyl alcohol concentration, headspace concentrations of all of three aroma compounds were decreased as ethyl alcohol concentration increased. But those patterns were slightly different. Dimensionless Henry's constant equation (Hi) of cineol compound with ethyl alcohol concentration (x) was as follows: $Hi=(-5.75+x)/(-7017.6+257.3{\times}x)$. Dimensionless Henry's constants of cineol, myrecene and pinene in 1 atm, $25^{\circ}C$ and 70% ethyl alcohol concentration were 0.0058, 0.0182 and 0.0365, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.20-25
• /
• 2012

During drilling, the precipitation velocity of cuttings within an annulus depends on the density and configuration of the cuttings, and on the density, viscosity, and rheological characteristics of the drilling fluid. In directional drilling in particular, it is difficult to adjust and control the cuttings. In contrast to vertical drilling, it is very important to evaluate the flow characteristics of a drilling flow field. However, research on the transfer features of cuttings is inadequate. In this study, in order to identify transfer features of cuttings, an experiment was performed under wide-ranging conditions by constructing a slim hole annulus ($44mm{\times}30mm$) device. In this experiment, the particle volume fraction were influenced by particle size, particle concentration within the flow, pipe rotation, flow volume, and inclination of the annulus. In addition, a mathematical formula for volumetric concentration was deduced and compared to the test results and behavior of cuttings under the other drilling condition was made to be predicted. Therefore, this study can provide meaningful data for vertical and horizontal drilling, and for directional drilling.

• Journal of Embryo Transfer
• /
• v.14 no.3
• /
• pp.145-153
• /
• 1999

This study was conducted to investigate the effects of vitrification solution and developmental stage on the survival rate of vitrified-thawed human blastocyst embryos. Human blastocyst embryos were cryopreserved by vitrification using EFS and GE solution, and their survival rates were examined after thawing and further culture. EFS solution was consisted of 40% ethylene glycol, 18% Ficoll 70 and 0.3M sucrose. GE solution was consisted of 25% glycerol and 25% ethylene glycol. Embryos were exposed to EFS and GE solution by 2 steps and 3 steps, respectively, and plunged into liquid nitrogen after loading into 0.25ml plastic straws. Blastocysts were classified into 4 groups in accordance with their developmental stage: into 1) EEB, 2) MEB and 3) EdB, of blastocysts developed on day 5, and 4) 6d-Bla(the blastocysts which formed on day 6). The blastocysts at each stage were vitrified by GE solution and cryopreserved in LN2. After thawing them, we examined their survival rates, respectively. The resulted of this study were as follows: 1. The survival rate of blastocysts vitrified by GE solution was 64.4%, significantly higher than that (5.7%) vitrified by EFS solution (P<0.001). 2. When the blastocysts were vitrified by GE solution according to each developmental stage, the survival rates of EEB, MEB, EdB and 6d-Bla were 65.9%, 65.9%, 73.2% and 58.1%, respectively. In conclusion, the cryopreservation of human blastocysts by vitrification is likely to have a marked advantage in terms of cost, work and time as compared to the conventional slow freezing in IVF-ET programs.

• Journal of Embryo Transfer
• /
• v.9 no.1
• /
• pp.65-71
• /
• 1994

This study were carried out to investigate the effective concentration of cryoprotectant agents and sucrose by one-step straw method, and to determine the optimum thawing temperature and equilibration time of frozen bovine embryos. The bovine embryos following dehydration by cryoprotective agents and a various concentration of sucrose were directly plunged into liquid nitrogen and thawed in 3O$^{\circ}C$ water. Survival rate was defined by FDA test. The results are summarized as follows : 1. The survival rate of bovine embryos thawed after rapid freezing in the freezing medium containing a various kinds of cryoprotective agents added 0.25M and O.50M sucrose were 28.6% and 25.0%, 35.1% and 31.6%, 32.4% and 24.4%, 34.2% and 28.2%, 18.9% and 17.6%, 14.7.% and 21.6%, respectively. 2. The survival rate of bovine embryos thawed after rapid freezing in the freezing medium containing a various concentration of sucrose added 1.5M and 2.OM glycerol, i.5M and 2.OM DMSO and 1.5M and 2.OM propanediol were 22.9~37.8%, 2O.7~31. 3%, 19.2~30.0% and 17.2~25.0%, respectively. 3. The temperature thawed at 2$0^{\circ}C$ after rapid freezing of bovine embryos resulted in a significantly higher embryos survival rate than did at 3$0^{\circ}C$ and 35$^{\circ}C$. 4. The equilibration time on the survival rate of bovine embryos was attained after short period of time(2.5~5 min.) in the freezing medium higher than long period of time (1O~20 min.).