• 상하수도학회지
• /
• 제21권6호
• /
• pp.709-715
• /
• 2007

The dewaterability of a sludge can be characterized by two ways: the residual moisture content in the sludge cake after dewatering process, and the filtration of the sludge. Time to filter (TTF) represents filtration processes that are special cases of the flow through a solid matrix concept. TTF characterizes a resistance to filtration. The sludge resistance, in turn, can be subdivided into resistances associated with the solid phase and the liquid phase to evaluate the effect of each of the two phases on sludge dewaterability. In order to determine the dewatering characteristics of the water sludge samples, TTF and zeta potential were measured. For these studies cationic polymer was chosen for water sludge dewatering experiments. The zeta potential of thickener sludges neared from minus values to zero values till 4 days after sampling. The dewaterability of thickener sludges using cationic polymer was deteriorated according to the increase of detention time. As the detention time was increased from 4 to 10 days, the optimal dose of the polymer was increased from 4 to 8mg/L. Therefore, the optimal detention time plays an important part for the dewaterability of a sludge.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.501-507
• /
• 2006

Dissolved air flotation (DAF) has been well known for the gravity separation process. The solids to be separated are transferred from the water body to the water surface using micro-air bubbles. DAF has also been used for enhancing solids-liquid separation of industrial and municipal wastewater by adding a its unit parallel to a sedimentation unit to reduce the hydraulic loading in the sedimentation clarifier. This study was to investigate flotation characteristics of activated sludge by the recent DAF technique without chemical agents. In addition, the effect on temperature in flotation of activated sludge and the thickening degree of activated sludge were studied.

• 한국양봉학회지
• /
• 제34권4호
• /
• pp.315-323
• /
• 2019

Large amounts of sludge produced by paper mill industries represent one of the most serious environmental problems in the world. Recently, beekeepers living in the neighborhood of the paper mill in Hwasan County, Youngcheon city, GB, Korea, became alarmed that honey bee colonies were dying off suddenly across the neighborhood. A preliminary study was conducted to evaluate the toxicity (oral, fumigation, repellent) of recycled solid paper mill sludge (SPMS) and leachate paper mill sludge (LPMS) to honey bee workers under laboratory conditions, and to analyze the volatile organic compounds(VOC). The SPMS and LPMS were separately subjected to a liquid-liquid extraction (LLE) at three temperatures to extract VOC(highest VOC yields: 1.52% SPMS and 0.34% LPMS). A total of 70 chemicals were detected in the VOC of paper mill sludges, of which 49 and 21 volatile organic compounds from SPMS and LPMS, respectively. The SPMS was dominated by high degree presence of stanols (saturated sterols), such as cholestanol, cholestan-3-ol and also saturated hydrocarbons. However, LPMS was characterized by the absence of sterols. Both SPMS and LPMS showed an influence on the olfactory behavior of honey bee on Y-tube assay, with repulsion rates of 72 and 68%, respectively. Both SPMS and LPMS at concentration of 100mg/mL caused higher honey bee oral mortality than the untreated controls at 48, 72, 96 and 120 hours after treatment(highest oral mortality at 120 hr: 85.74%(SPMS); 93.51 % (LPMS)). A similar pattern was observed when honey bees were tested to fumigant toxicity. Both SPMS and LPMS caused significant higher mortality than the untreated control 24 hour after the exposure (highest fumigation mortality at 120 hr: 69.4% (SPMS); 56.8% (LPMS)). These preliminary results indicated that paper mill sludge could be partly responsible for sudden death and disappearance of honey bees, especially in hot humid summer days. With climate change, the risk of environmental chemical exposure to honey bee would pose greater attention.

• 환경위생공학
• /
• 제10권1호
• /
• pp.86-96
• /
• 1995

Alum recovery has recently gained more attention because many water utilities need to improve their sludge handling and disposal practices. As part of an overall sludge management program recovery can reduce the amount of solids and allow for reuse of the recovered Alum as a coagulant. This study was examined the effectiveness of Alum recovery from the Sludge at the D water treatment plant in Kwangju city. The results were summarized as follows 1. Alum recovery was obtained sufficiently acidification(An optimum condition was pH2-3) With $H_{2}SO_{4}$ to settled sludge. In this case recovered liquid Alum from sludge of 2.1% solids concentration at pH 2.1 was contains Aluminum $1,602mg/{\ell}$(as $Al_{2}O_{3}$ 0.3% ) and other metal of low level. 2. It was an optimum condition to all reuse of recovered Alum as a coagulant that rate of Commercial Alum:Recovered Alum=$14{\mu}{\ell}/{\ell}{\;}:{\;}200{\mu}{\ell}/{\ell}$ In a result of Jar Tests. 3. It was a result of Alum recovery from sludge, the reduction effect of amount of solids was about 57.4%. 4. If all recovered Alum were reused the reduction effect of solid wastes disposal cost and chemical drug's cost was about 22%.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.800-808
• /
• 2005

It is required to propose an alternatives for appropriate sludge treatment owing to persistent construction of sewage treatment plant and increase of sewage sludge quantity. In order to treat sludge more efficiently, the methods which reduce the cost of sludge treatment have been studied such as sludge reduction and conditioning. Especially ozone treatment reduces solid quantity and improves separation of solid-liquid at the same time. Therefore ozone treatment have a positive effect on reduction and stabilization of sludge. So, this study applied ozone to sewage sludge and induced cell destruction of sludge. By comparing with the correlation between thickening and dewatering, and evaluating moisture content and solubilization of cake, this study verificates the effect of process improvement for ozone pre-treatment. In J-STP case, according to ozone dose solid flux increased about 12 times from $1kg/m^2{\cdot}h$ to $12kg/m^2{\cdot}h$. Also this plant were capable to shorten thickening time from 40 minutes to 6~7 minutes. Thus it is expected to reduce volume and retention time of thickener. On pH effect factor, dewatering at pH4 was more than at pH11, $3.05{\times}10^{11}$ and $3.82{\times}10^{11}(m/kg)$. But effect of pH was analogous to ozone, $2.81{\times}10^{11}(m/kg)$. The effect of pH on thickening was similar to law sludge, $0.68(kg/m^2{\cdot}h)$, and the effect of ozone injection on thickening was the biggest, $3.45(kg/m^2{\cdot}h)$. The COD solubilization rate improved from about 5 to 30%. So it is judged that we are able to utilize most solubilized sludge to another sewage treatment plants.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.29-33
• /
• 2005

In order to recycle the waste material and to develop the thickening unit of waste activated sludge from wastewater treatment facilities, the filtration bio-reactor equipped with a shadow mask filter module was employed for this work from which the operating properties and parameters were drawn. The sludge thickening and filtration unit is made of cylindrical acryl tank(12cm i.d. ${\times}$ 58cm height: working volume of 6L), where the flat-sheet type of shadow mask filter module(pore size: 220~250um, opening area: 34.8~39.6%) was installed and the effluent was withdrawn from the effluent port at the lowest point of the reactor, and the filtration was performed only by the hydraulic pressure. For evaluating the operating performance of this reactor, some parameters such as the solid-liquid separation of different biomass concentrations, the water quality of filtrate, the aeration cleaning time and the cleaning effect were investigated. Depending on the MLSS concentrations, the different time to withdraw 3L of filtrate was required in which the longer filtration time was necessary for the higher MLSS concentrations caused by the thicker formation of cake layer: 40 minutes for 5,000 mg/L, 70 minutes for 10,000 mg/L and 100 minutes for 15,000 mg/L, where the concentrations of SS were 8.9, 6.7 and 6.5 mg/L, respectively. Under the same operating conditions (the intensity of aeration cleaning: 80 L/min, MLSS: 10,000 mg/L), the proper aeration cleaning time was revealed 30 seconds, and the stable formation of cake layer was in the range of 10 to 15 minutes. Therefore, the shadow mask considered as a waste material can be of use as a filter material for the sludge thickening system.

• 유기물자원화
• /
• 제29권4호
• /
• pp.99-106
• /
• 2021

본 연구는 혐기성 소화의 전처리로써 열가수분해와 고액분리가 결합된 공정의 성능을 평가하였다. 탈수케이크는 열가수분해를 통해 가용화되며, 이후 고액분리를 수행한다. 고액 분리된 액상은 혐기성 소화에 기질로써 이용되고 고형물은 열가수분해로 회수된다. 열가수분해의 가용화율(COD 기준)은 45.1-49.3%이며 고액분리와 결합한 공정은 76.1-77.6%로 나타났다. Dual-pool two-step model을 통해 도출된 메탄 발생 특성을 살펴보면 고액 분리된 액상의 전체 분해 가능한 물질 중 분해가 빠른 물질의 비(a)는 0.891-0.911로 열가수분해된 시료에 비해 높게 나타났다. 반면에 분해가 빠른 물질의 반응 속도(kF)는 유사하게 나타났다. 이를 통해 열가수분해와 고액분리가 결합한 공정은 열가수분해를 통해 분해가 빠른 물질을 생성하고, 고액분리를 통해 선별하는 것으로 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.

• 한국환경과학회지
• /
• 제23권1호
• /
• pp.97-104
• /
• 2014

The sludge flotation/thickening apparatus equipped a micro-bubble generating pump was used to investigate micro-bubble generating properties on operational parameters. We evaluated micro-bubble generating properties as results to be operated the apparatus by operational parameters which are pump discharge pressure, air/water ratio(A/W ratio), air flow rate, and water flow rate. Micro-bubble generating efficiencies in pumps without recycling flow and with 50% of recycling flow was found to be very efficient on optimum A/W ratio from 1.06 to 3.62% and optimum A/W ratio from 1.05 to 4.06%, respectively. In condition of 3.6% of A/W ratio, we showed that the apparatus could be generated 36,000 ppm of micro-bubble concentration to be optimum treatment efficiency in sludge thickening process.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.308-313
• /
• 2006

Charicteristics of piggery waste and treatment processing sludges for reuse were investigated. If it was thoroughly regulated in disinfectants, antibiotic substances and heavy metals, raw piggery waste can be gratified in criteria for fermentative compost (liquid) for flowers cultivation. Also, Because it is satisfied with various criteria of heavy metals and fertilizer contents for reuse except water content, primary pre-treatment sludge is very good material for composting. If provated goods on heavy metals are used in coagulation & dewatering process, coagulation & dewatering sludges are suitable for criteria of special waste regulation and by-product compost. This study proves that, if they are accomplished with suitable composting and mature process, piggery waste and processing sludges are free from microbiological problems as well as criteria of composting.