• 한국가구학회지
• /
• 제21권2호
• /
• pp.126-132
• /
• 2010

High wear resistances are obtained with an additional coating of the surface of the decor film in the same operation of impregnating with low viscosity melamine resin by liquid overlay system. The cellulosic fibers have a good adhesion to the corundum particles and keep them sufficiently homogeneous in the blend with the resin. The amount of these fibers in nearly as big as it is in a common overlay in relation to the resin. Therefore these fibers keep the resin inside during the press process and consequently very the surface of the decor print of the film. That means that the corundum particles are equally dissipated throughout the entire layer over the decor. The change of the color of the print is nearly not visible as the particles are almost equally dissipated. Looking to the flooring purposes of liquid overlay one can see that by the lesser exposure of the corundum particles on the very surface, there is no longer an abrasive surface but a feeling like a normal melamine surface.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.121-127
• /
• 2018

액체침투탐상법(PT)을 이용한 직경 1 m, 길이 6 m의 초장대형 파이프내면 육성용접부의 표면결함 진단시스템을 개발하였다. 우선 CATIA를 사용하여 주요 유닛 및 PT machine 전체를 3D 모델링하였으며, 이를 구조강도 및 변형 해석에 사용하였고 또한 각 유닛의 동작 간섭현상을 체크하여 2차원 제작도면 생성으로 제작에도 사용하였다. ANSYS를 사용하여 구조강도 해석 및 변형 해석한 결과, 최대 등가응력은 44.901 MPa 발생하였고, 이는 PT machine의 재질인 SS400의 항복인장강도 200 MPa 보다 작으므로 안전하다고 판단되며, 또한 최대 변형은 0.15 mm 발생하였고, 이는 하중이 제거되면 원래대로 돌아간다고 판단된다. 개발된 장비의 성능을 검증하기 위하여 공작물의 최대이동속도 7.2 m/min., 최대회전속도 9 rpm, 반복위치정밀도 1.2 mm, 검사속도 $1.65m^2/min$. 등을 확인하였으며, 이 모든 검사 항목은 개발 목표치를 만족하였다. ASME SEC. V&VIII의 방법에 따라 육성용접층의 균열, 기공, 인더컷 등의 표면결함 유무를 확인하기 위하여 개발한 PT 자동검사시스템을 사용하여 PT검사를 실시한 결과, 표면층의 결함은 관찰되지 않았다. 부가적으로 육성용접부를 평가하기 위하여 ASTM G48-11의 방법으로 Ferric Chloride pitting test에 따라 육성용접층의 부식시험을 실시한 결과 weight loss는 $0.3g/m^2$으로 만족하였으며, 또한 ASTM A751-14의 방법에 따라 육성용접층의 화학성분을 분석 결과 모든 성분이 규격을 만족하였다.

• 식물조직배양학회지
• /
• 제25권4호
• /
• pp.231-236
• /
• 1998

배지상에 여과지를 덮어놓는 간단한 물리적 처리가 체세포배의 발생 및 발아에 미치는 영향을 밝히기 위하여 본 실험관찰을 수행하였다. 배지상에 덮어놓은 세장의 여과지위에서 일주일 동안 당근 자엽절편을 배양한 후 MS 기본배지에 계대배양을 하면 여과지 덮개 없는 배지에서의 체세포배발생 보다 2배에서 39배의 배발생을 나타내었고, 체세포배의 성숙 및 발아도 증진되었다. 배지상의 여과지에 배양액을 첨가한 다음 배양을 하면 여과지에 배양액을 첨가하지 않은 경우보다 배발생이 감소되었다. 그러므로 여과지덮개는 자엽절편을 치상한 배양환경의 습기를 변화시켜 체세포배의 발생을 증진시킨 것으로 생각된다.

• 한국미생물·생명공학회지
• /
• 제23권5호
• /
• pp.559-564
• /
• 1995

Twenty microbial strains producing the acylase were isolated from soil by using Micrococcus luteus ATCC 9341 as an indicator strain, using either D-($\alpha $)-phenylglycine methylester and 7-aminocephalosporanic acid (7-ACA) or glutaric acid dimethylester and 7-ACA as substrates. Among the isolates, only one strain was turned out to be the 7-ACA producer from either cephalosporin C or glutaryl 7-ACA as the substrates by using the overlay of 7-ACA sensitive strain (SS5). 7-ACA produced from cephalosporin C by an isolate (APS20) was detected by high performance liquid chromatography. The isolated strain (APS20) was identified to Bacillus macerans on the basis of cellular fatty acid profile by gas chromatography. Bacillus macerans APS20 had no $\beta $-lacta-mase activity on cephalosporin C, and that is very important for the enzymatic production process of 7-ACA. However, this strain was resistant up to 100 $\mu $g/ml of cephalosporin C.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.51-60
• /
• 2015

Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion, cavitation, flashing and/or liquid droplet impingement, is a main concern in secondary steam cycle piping system of nuclear power plants in terms of safety and operability. Thinned pipe management program (TPMP) has being developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning. In this paper, newest technologies, standards and regulations related to the integrity assessment, repair and replacement of thinned pipe component are reviewed. And technical improvement items in TPMP to secure the reliability and effectiveness are also presented.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.49-51
• /
• 2010

Nanoimprint lithography (NIL) using ultraviolet (UV) rays is a technique in which unconventional lithographic patterns are formed on a substrate by curing a suitable liquid resist in contact with a transparent patterned mold, then releasing the freshly patterned material. Here, various solutions are introduced to achieve sufficient overlay accuracy and to overcome the technical challenges in resist patterning via UV imprinting. Moreover, resist patterning of all the layers in TFT and of the BM layer in CF was carried out using UV imprinting lithography to come up with a 12.1-inch TFT-LCD panel with a resolution of $1280{\times}800$ lines (125 ppi).

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.