• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.715-721
• /
• 2011

This study was conducted to estimate aboveground biomass and nitrogen storage potential of tree species-eight clones of a poplar and hybrids, one clone of Salix alba L., dawn redwood (Metasequoia glyptostroboides Hu and W.C. Cheng), yellow poplar (Liriodendron tulipifera L.), Okamoto maple (Acer okamotoanum Nakai), and pin oak (Quercus palustris $M{\ddot{u}}nchh.$)- after treating with liquid pig manure. Stems showed the highest percentage of aboveground biomass, and followed by branches and leaves. Nitrogen content in aboveground biomass components was the highest in leaves, and followed by branches and stems. Average aboveground biomass production was higher in the clones and species treated with manure than those of not treated, 30 ton/ha and 16 ton/ha, respectively. In the manure-treated site, clone 'Dorskamp' of Populus deltoides${\times}$Populus nigra showed the highest aboveground biomass (48.3 ton/ha). Average nitrogen storage potential was superior in the clones and species treated with manure than those of not treated, 159 kg/ha and 90 kg/ha, respectively. Clone 'Dorskamp' also showed the greatest nitrogen storage potential (286.5 kg/ha) among tested tree species. Therefore, 'Dorskamp' is the most suitable clone for treating liquid pig manure, but additional studies are needed to determine any damages or tolerance from the treatment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.724-729
• /
• 2008

Umbilical cord blood has been recently considered an attractive potential alternative as a source of stem cell transplantation to curing diseases such as leukemia, cancers, immune disorders. Normally the stored system of the umbilical cord blood specimen is equipped with a computer-controlled robotic arm that enables the samples to locate the identification places in liquid nitrogen tank at regulated temperature as about $-196^{\circ}C$. As the half of robotic arm is in the air and the rest part is submerged in liquid nitrogen, the temperature of robotic arm varies from ambient to liquid nitrogen temperature. In this study the temperature variation of upper part of arm above tank lid was thermally analysed by using the commercial code of Ansys. The result of analysis was that the upper part of robotic arm was seriously frozen due to heat transfer from liquid nitrogen as low as -$120^{\circ}C$. In order to solve the frost problem of robotic arm, small PTFE tube block as resistance material was introduced into the lower part of tank lid instead of the whole stainless steel(SUS) robotic arm. The results showed that the temperature of robotic arm above the lid was higher enough, and this method would be one of the very effective measure to solve the problem.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.2
• /
• pp.64-69
• /
• 2014

Measuring an exact amount of remaining cryogenic liquid propellant under microgravity condition is one of the important issues of rocket vehicle. A Pressure-Volume-Temperature (PVT) gauging method is attractive due to its minimal additional hardware and simple gauging process. In this paper, PVT gauging method using liquid nitrogen is investigated under microgravity condition with parabolic flight. A 9.2 litre metal cryogenic liquid storage tank containing approximately 30% of liquid nitrogen is pressurized by ambient temperature helium gas. During microgravity condition, the inside of the liquid tank becomes near-isothermal condition within 1 K difference indicated by 6 silicon diode sensors vertically distributed in the middle of the liquid tank. Helium injection with higher mass flow rate after 10 seconds of the waiting time results in successful measurements of helium partial pressure in the tank. Average liquid volume measurement error is within 11% of the whole liquid tank volume and standard deviation of errors is 11.9. As a result, the applicability of PVT gauging method to liquid propellant stored in space is proven with good measurement accuracy.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1341-1349
• /
• 2000

The addition of 5% NaCI to standard plate count (SPC) and bromcresol purple (BCP) agar showed the highest viable cell counts for Jeot-kal samples. The use of 15% glycerol as cryoprotectant showed the highest microbial survival rate at both temperatures, $-20^{\circ}C$ and $-170^{\circ}C$, and on both colony count media, SPC and BCP. During the aging, the pH of Bajirak Jogae-Jeot (fermented clam) decreased from 6.8 to 5.0. Crude protein content was 10% for Bajirak Jogae-Jeot and $6{\sim}7%$ for Myeolchi-Jeot (fermented anchovy). Microbial population of Bajirak Jogae-Jeot was $10^9\;CFU/g$ after 4 weeks of aging, but was only $10^{3-5}\;CFU/g$ in the case of Myeolchi-Jeot. The proportion of Gram positive and catalase negative bacteria in Bajirak Jogae-Jeot increased drastically during the 4 weeks of aging, which showed typical lactic bacterial fermentation. After 2 years' storage of Jeot-kal in liquid nitrogen tank, the cell counts of total aerobic or lactic bacteria were decreased, resulting in about 10% survival rate. Microbial floral change of Jeot-kal was also investigated. In the case of Bajirak Jogae-jeot, the ratio of rod to cocci and that of Gram negative to positive increased after liquid nitrogen storage. But, rod to cocci ratio of Myeolchi-jeot decreased after liquid nitrogen storage. The ratio of yeasts decreased in both cases after storage.

• Electrical & Electronic Materials
• /
• v.11 no.10
• /
• pp.40-45
• /
• 1998

This paper describes a collaborative work between SEI and KEPCO on the Superconducting Magnetic Energy Storage system (SMES). We have studied two types of magnets. One is the 400kJ class LTS-SMES for testing the power stabilization operated at liquid helium temperature (4.2K) and the other is the 100J class HTS-SMES for confirming the possibility of applying HTS wire to SMES at liquid nitrogen temperature (77k). In this paper, the design of the magnet and the test results are described. Each magnet performed completely at rated operation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2004

The powder and liquid products of seasoned and smoked skipjack tuna (Euthynus pelamis) was manufactured by using small skipjack tuna (1-2 kg, 20-30 cm) captured in the East Sea, Korea. Smoking was done three times at $80^{\circ}C$ for 8 hrs to decrease the moisture content below $15\%.$ The seasoned and smoked skipjack tuna powder with liquid smoke showed the lower pH than the control. The pH, VBN, amino nitrogen content, and TBA value were increased slowly as storage period was increased at room temperature. Liquid smoke decreased the production of animo nitrogen and VBN. Vacuum packaging was efficient for inhibiting the deterioration and the microbial growth of the seasoned and smoked skipjack tuna powder product.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.301-305
• /
• 1998

This study was conducted to evaluate the liquid composting efficiency using pig manure in different condition such as simple storage type reactor, continuous aeration reactor, anaerobic reactor and anaerobic agitation reactor. Continuous aeration reactor was the most efficiency method to BOD and malodors removal than other methods. While nitrogen loss in continuous aeration reactor was 47% of initial concentration, which was the higher amount than any other digestion methods. The digestion efficiency between anaerobic reactor and anaerobic agitation reactor were similar, but E. coli and malodor removal efficiency were a little higher in the anaerobic agitation reactor. Simple storage type reactor which was conventional digestion method in rural area gave lower efficiency than aerobic and anaerobic digestion methods in view of BOD, E. coli and malodor removal. The liquid composting efficiency which were evaluated by various indicators like pH, BOD, E, coli, malodor and nitrogen loss was high in the order of anaerobic agitation reactor>continuous aeration reactor>anaerobic reactor>simple storage type reactor.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.6
• /
• pp.642-650
• /
• 2016

One of the most feasible solution for reducing the excessive energy consumption and carbon dioxide emission is usage of more efficient fuel such as hydrogen. As is well known, there are three viable technologies for storing hydrogen fuel: compressed gas, metal hydride absorption, and cryogenic liquid. In these technologies, the storage for liquid hydrogen has better energy density by weight than other storage methods. However, the cryogenic liquid storage has a significant disadvantage of boiling losses. That is, high performance of thermal insulation systems must be studied for reducing the boiling losses. This paper presents an experimental study on the effective thermal conductivities of the composite layered insulation with aerogel blankets($Cryogel^{(R)}$ Z and $Pyrogel^{(R)}$ XT-E) and Multi-layer insulation(MLI). The aerogel blankets are known as high porous materials and the good insulators within a soft vacuum range($10^{-3}{\sim}1$ Torr). Also, MLI is known as the best insulator within a high vacuum range(<$10^{-6}{\sim}10^{-3}$ Torr). A vertical axial cryogenic experimental apparatus was designed to investigate the thermal performance of the composite layered insulators under cryogenic conditions as well as consist of a cold mass tank, a heat absorber, annular vacuum space, and an insulators space. The composite insulators were laminated in the insulator space that height was 50 mm. In this study, the effective thermal conductivities of the materials were evaluated by measuring boil-off rate of liquid nitrogen and liquid argon in the cold mass tank.

• Preventive Nutrition and Food Science
• /
• v.6 no.4
• /
• pp.201-205
• /
• 2001

As a series of studies on improving the processing suitability of imported Pacific saury, oxidative stability of seasoned-dried Pacific saury treated with liquid smoke (T2 product) was examined during storage, comparing with control (C, seasoning only) and T1 (treatment of 0.05% BHT instead of liquid smoke). The pH of T2 treated with liquid smoke was relatively lower than those of C and T1 during storage. The contents of volatile basic nitrogen in all products increased continuously during storage. In the changes of TBA and POV of products during storage, the POV of T2 was lower than that of T1, and the TBA values of T1 and T2 were lower than that of C product. The major fatty acids were 22 : 1n-11, 20 : 1n-11, 16 : 0, 14 : 0, 22 : 6n-3, 20 : 5n-3, 18 : 4n-3, 16 : 1n-7, 14 : 1n-7 and 18 : 1n-9 in the both C and T2 products. The contents of polyunsaturated fatty acids in hath C and T2 somewhat decreased with increasing storage period, while those of saturated and monounsaturated fatty acids increased.

• Korean Journal of Materials Research
• /
• v.17 no.4
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.