• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.284-292
• /
• 2016

Water supplied through dental unit waterlines (DUWLs) has been shown to contain high number of bacteria. To reduce the contamination of DUWLs, it is essential to develop effective disinfectants. It is, however, difficulty to obtain proper DUWL samples for studies. The purpose of this study was to establish a simple laboratory model for reproducing DUWL biofilms. The bacteria obtained from DUWLs were cultured in R2A liquid medium for 10 days, and then stored at $-70^{\circ}C$. This stock was inoculated into R2A liquid medium and incubated in batch mode. After 5 days of culturing, it was inoculated into the biofilm formation model developed in this study. Our biofilm formation model comprised of a beaker containing R2A liquid medium and five glass rods attached to DUWL polyurethane tubing. Biofilm was allowed to form on the stir plate and the medium was replaced every 2 days. After 4 days of biofilm formation in the laboratory model, biofilm thickness, morphological characteristics and distribution of the composing bacteria were examined by confocal laser microscopy and scanning electron microscopy. The mean of biofilm accumulation was $4.68{\times}10^4$ colony forming unit/$cm^2$ and its thickness was $10{\sim}14{\mu}m$. In our laboratory model, thick bacterial lumps were observed in some parts of the tubing. To test the suitability of this biofilm model system, the effectiveness of disinfectants such as sodium hypochlorite, hydrogen peroxide, and chlorhexidine, was examined by their application to the biofilm formed in our model. Lower concentrations of disinfectants were less effective in reducing the count of bacteria constituting the biofilm. These results showed that our DUWL biofilm laboratory model was appropriate for comparison of disinfectant effects. Our laboratory model is expected to be useful for various other purposes in further studies.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.739-746
• /
• 2017

As alternatives to antibiotics in livestocks, probiotics have been used, although most of them in the form of liquid or semisolid formulations, which show low cell viability after oral administration. Therefore, suitable dry dosage forms should be developed for livestocks to protect probiotics against the low pH in the stomach such that the products have higher probiotics survivability. Here, in order to develop a dry dosage forms of probiotics for poultry, we used hydroxypropyl methylcellulose phthalate 55 (HPMCP 55) as a tablet-forming matrix to develop probiotics in a tablet form for poultry. Here, we made three different kinds of probiotics-loaded tablet under different compression forces and investigated their characteristics based on their survivability, morphology, disintegration time, and kinetics in simulated gastrointestinal fluid. The results indicated that the probiotics formulated in the tablets displayed higher survival rates in acidic gastric conditions than probiotics in solution. Rapid release of the probiotics from the tablets occurred in simulated intestinal fluid because of fast swelling of the tablets in neutral pH. As a matrix of tablet, HPMCP 55 provided good viability of probiotics after 6 months under refrigeration. Moreover, after oral administration of probiotics-loaded tablets to chicken, more viable probiotics were observed, than with solution type, through several digestive areas of chicken by the tablets.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.136-141
• /
• 2016

The production scale of mushrooms in Korea is approximately 600 billion won, which is 1.6% of Korea's gross agricultural output. In Korea, ca. 190,000 tons of mushrooms are harvested annually. Although the numbers of mushroom farms and cultivators are constantly decreasing, total mushroom yields are increasing owing to large-scale cultivation facilities and automation. The recent expansion of the well-being trend has caused an increase in mushroom consumption in Korea: the annual per capita mushroom was 3.9 kg ('13), whichis a little higher than that in Europe. Thus, mushroom export, mainly Flammulina velutipes and Pleurotus ostreatus, has increased since the mid-2000s. Recently, however, it is slightly reduced. Nevertheless, Vietnam, Hong Kong, the United States, and the Netherlands continue to export mushrooms, and Korea has increased its export to Australia, Canada, Southeast Asia, etc. Canned Agaricus bisporus, the first export of the Korean mushroom industry, reached it speak sales in 1977-1978. When Korea initiated trade with China in 1980, the international prices of mushrooms fell sharply, leading to shrinkage of the domestic markets. Spurred by the high demand to develop substitute goods for A. bisporus, the oyster mushroom (P. ostreatus) gained attention since it seemed to suit the taste of Korean consumers. Although the log cultivation technique for oyster mushroom was developed in the early 1970s, it required a great deal of labor. Thus, we developed the shelf cultivation technique, which is easier to manage and allows for mass production. In this technique, the growing shelf is made mafrom fermented rice straw, whichis the only P. ostreatus medium in the world and isused only in South Korea. After then, the use of cotton wastes as an additional material of medium, the productivity. Currently, we are developing a standard cultivation technique and environmental control system that can stably produce mushrooms throughout the year. The increase of oyster mushroom production may boostthe domestic market and contribute to industrial development. In addition, oyster mushroom production technology played a role in forming the basis for the development of bottle cultivation, which made mass production. In particular, bottle cultivation using liquid spawn could allow for the export of F. velutipes and Pleurotus eryngii. In addition, the white varieties of F. velutipes were second developed in the world after Japan. We also developed the new A. bisporus cultivar 'Saeah', which is easy to grow in Korea. In hopes to advance the mushroom industry, we will continue to develop cultivars with international competitive power and to improve cultivation techniques.

• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.1-15
• /
• 1984

The tin and tungsten deposits are embedded around the age unknown Buncheon granite gneiss which intruded the Precambrian schists, gneiss and amphibolites in Bonghwa-Uljin area. Pegmatite dike swarm developed intermittently about 4km along the southern border of Buncheon granite gneiss at Wangpiri area. Thickness of pegmatite dikes range from 0.5 to 15m. Pegmetite is consisted of quartz, microcline, albite, muscovite and frequently topaz, tourmaline, garnet, fluorite, fluorapatite and lepidolite. Pegmatite dikes are greisenized, albitized and microclinized along dike walls. Cassiterites are irregularly disseminated through the intensely greienized and albitized parts of the pegmatite. Cassiterite crystals are mainly black to dark brown and contain considerable Ta and Nb. Average Ta and Nb contents of the four cassiterite samples are 5300 and 3400 ppm. The Ssangjeon tungsten deposits is embedded within the pegmatite dike developed along the northern contact of Buncheon granite gneiss with amphibolite. This pegmatite developed 2km along the strike and thickness varies from 10 to 40m. Mineral constituents of the pegmatite are quartz, microcline, plagioclase, muscovite, biotite, tourmaline and garnet. Ore minerals are ferberite and scheelite with minor amount of molybdenite, arsenopyrite, pyrrhotite, pyrite, chalcopyrite, sphalerite, galena, pentlandite, bismuthinite, marcasite, and fluorite. Color and occurrence of quartz reveals that quartz formed at three different stages; quartz I, the earliest milky white quartz formed as a rock forming mineral of simple pegmatite; quartz II, gray to dark gray quartz which replace the minerals associated with quartz I; quartz III, the latest white translucent quartz which replace the quartz I and H. All of the ore minerals are precipitated during the quartz II stage. Fluid inclusion in quartz I and II are mainly gaseous inclusions and liquid inclusions are contained in quartz III and fluorite. Salinities of the inclusion in quartz I and II ranges from 4.5 to 9.5 wt. % and 5.1 to 6.0 wi. % equivalent NaCl respectively. Salinities of the inclusion in fluorite range from 3.5 to 8.3 wt. % equivalent NaCl. Homogenization temperatures of the inclusion in quartz I, II and III range from 415 to $465^{\circ}C$, from 397 to $441^{\circ}C$ and 278 to $357^{\circ}C$. Data gathered in this study reveals that tin and tungsten mineralization in this area are one of prolonged event after the pegmatite formation around Buncheon granite gneiss.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.2
• /
• pp.237-243
• /
• 2020

Listeria sp. is one of the pathogenic bacteria causes the infection listeriosis, through mainly raw food such as fishery food, dairy food and vegetables. Listeria sp. is a Gram-positive, non-spore-forming, motile, and facultative anaerobic bacterium. Because of the tolerance of Listeria sp. to low temperature and high salt concentration, it is very difficult to prevent them contaminated in the food, which do not require heating, especially, such as raw fishery products. So prevention and removal of bacterial contamination at the food manufacturing stage is the best method. In this study, therefore, several natural products including Psidium guajava and Geranium thunbergii were screened to investigate the antibacterial activity against Listeria sp., with expectation of fewer side effects and fewer resistance problems. Significant effects of two extracts were confirmed by well diffusion assay, MIC assay, and growth inhibition assay. P. guajava and G. thunbergii showed MIC values at 64-256 ㎍/mL meaning strong antibacterial activities against 6 kind of Listeria sp. tested. And the growth of Listeria sp. in the liquid media was actually inhibited by the addition of these two extracts.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.4
• /
• pp.261-265
• /
• 2000

To develope the enhanced bacterial strains capable of biodegradation for various chlorinated aromatic compounds, 100 bacterial strains were isolated from soil samples of suburbs of Taejon, Cheongju, and Jeonju by the enrichment culture. These strains can degrade pentachlorophenol (PCP) which is a kind of wood preservatives. Nineteen strains of the isolates were selected by fast colony-forming rate on solid minimal media containing PCP as an only source of carbon and energy. These strains were identified to genus level. Fifteen strains were identified as Pseudomonas, 1 strain as Acinetobacter and 3 strains were not. Genus Alcaligenes strains were not found among them. Pseudomonas sp. MU135. MU139, MU163 and MU 184 were able to degrade for 4 kinds of chlorinated compounds, PCP, 2,4-D, MCPA and 3CB. Pseudomonas sp. If was observed that MU139 exhibits the highest degradability in liquid minimal media at 72 hours after inoculation. Pseudomoans sp. MU147, MU177, MU184 and MU192 also degraded the compounds at higher rates. As the results, Pseudomonas sp. MU139 and unidentified strain MU184 had biodegrability for broad range of chlorinated compounds and higher rates of degradation for PCP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.271-272
• /
• 2012

Bulk Metallic Glasses (BMGs or amorphous alloy) exhibit high strength and good corrosion resistance. Applications of thin films and micro parts of BMGs have been used a lot since its inception in the research of BMGs. However, Application and fabrication of BMGs are limited to make structural materials. Thin films of BMGs which is sputtered on the surface of structural materials by sputtering process is used to improve limits about application of BMGs. In order to investigate the difference of properties between designed alloys and thin films, we identified that thin films deposited on the surface that have the characteristic of the amorphous films and the composition of designed alloys. Zr-Cu (Cu=30, 35, 38, 40, 50 at.%) and Zr-Cu-Al (Al=10 at.% fixed, Cu=26, 30, 34, 38 at.%) alloys were fabricated with Zr (99.7% purity), Cu (99.997% purity), and Al (99.99% purity) as melting 5 times by arc melting method before rods 2mm in diameter was manufactured. In order to analyze GFA (Glass Forming Ability), rods were observed by Optical Microscopy and SEM and $T_g$, $T_x$, ($T_x$ is crystallization temperature and $T_g$ is the glass transition temperature) and Tm were measured by DTA and DSC. Powder was manufactured by Gas Atomizer and target was sintered using powder in large supercooled liquid region ($=T_x-T_g$) by SPS(Spark Plasma Sintering). Amorphous foil was prepared by RSP process with 5 gram alloy button. The composition of the foil and sputtered thin film was analyzed by EDS and EPMA. In the result of DSC curve, binary alloys ($Zr_{62}Cu_{38}$, $Zr_{60}Cu_{40}$, $Zr_{50}Cu_{50}$) and ternary alloys ($Zr_{64}Al_{10}Cu_{26}$, $Zr_{56}Al_{10}Cu_{34}$, $Zr_{52}Al_{10}Cu_{38}$) have $T_g$ except for $Zr_{70}Cu_{30}$ and $Zr_{60}Al_{10}Cu_{30}$. The compositions with $T_g$ made into powders. Figure shows XRD data of thin film showed similar hollow peak.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.153-162
• /
• 2006

Fluid inclusions in amethyst from the Samcheonpo amethyst deposit of the Waryongsan area, Kyongnam generally grouped into four different types: Type I (liquid-rich and $10{\sim}23wt%$ NaCl, $Th=289{\sim}359^{\circ}C$), Type II (vapor-rich and $2{\sim}10wt%$ NaCl, $Th=304{\sim}365^{\circ}C;$), Type III (halite-bearing, $31{\sim}54wt%$ NaCl, $Th=259{\sim}510^{\circ}C;$), and Type IV ($CO_{2}-bearing\;9{\sim}13wt%\;NaCl,\;126{\sim}277^{\circ}$). Type I, II, and III inclusions are confined in the lower part of the amethyst and Type IV in the upper, which indicates significant hydrothermal activity during the earliest stage of the amethyst growth or the solidus condition of granitic rocks. The earliest fluid exsolved from the crystallizing granitic magma formed Type IIIa which is spatially associated with silicate melt inclusions. The homogenization behavior of Type IIIa inclusions by dissolution of the halite crystal after the bubble disappearance indicates that Type IIIa inclusions were trapped at some relatively elevated pressure. Exsolution of Type IIIb, I, II forming fluids with gradual decrease in their salinity was followed. The last fluid was $CO_{2}-bearing$ fluid (Type IV), which is assumed to be derived by decarbonization reactions with the surrounding sedimentary rocks. It suggests that the fine-grained granitic rocks containing the Samcheonpo amethyst crystallized at the sub-solvus condition saturated with water and exsolved abundant water.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.134-142
• /
• 1995

In order to elevate the efficiency of methane fermentation using the paper mill sludge, this experiment was conducted at two temperature conditions($35^{\circ}C$ and $60^{\circ}C$), and overlooked the addition effects of ethyl acetate as a substrate, nickel as a constituent of $F_430$, and sulfur as a cell growth factor and reductant. The cellulose of paper mill sludge was degraded to lower molecular materials by heating at $60^{\circ}C$ and NaOH treatment. Methane forming rates were 4.8% from NaOH-treated paper mill sludge added with ethyl acetate, 16.5% with sodium sulfide, 19.8% with nickel trioxide, 31.9% with mixture, and 9.6% with control at $60^{\circ}C$, but 0.21% with ethyl acetate, 2.14% with nickel acetate, 3.02% with nickel sulfate, 3.34% with nickel trioxide and 0.62% with control at $35^{\circ}C$. Therefore, methane yield was increased by approximately 10-fold at $60^{\circ}C$ than $35^{\circ}C$, and fermentation liquid added with mixture(nickel trioxide+ethyl acetate+sodium sulfide) at $60^{\circ}C$ showed the medium pH(7.0), higher COD value and lower nitrogen content.