• The Korean Journal of Ceramics
• /
• v.5 no.4
• /
• pp.400-403
• /
• 1999

The mechanical and electrical properties of hot-pressed and annelaed $\beta$-SiC+39vol.% $ZrB_2$ electroconductive ceramic composites were investigated as a function of the liquid forming additives of $Al_2O_3+Y_2O_3$(6:4 wt%). In this microstructures, no reactions and elongated $\alpha$-SiC grains with equiaxed $ZrB_2$ grains were observed between $\beta$-SiC and $ZrB_2$. The properties of the $\beta$-SiC+39vol.%$ZrB_2$ composites with 4wt% $Al_2O_3+Y_2O_3$ at R.T. are as follows: fracture toughness is 6.37 MPa.m1/2, electical resistivity is $1.51\times10^{-4}\Omega \cdot\textrm{cm}$ and the relative density is 98.6% of the theoretical density. The fracture toughness of the $\beta$-SiC+39 vol.% $ZrB_2$ composites were weakly decreased with increasing amount of $Al_2O_3+Y_2O_3$ additives. Internal stresses due to the difference of $\beta$-SiC and $ZrB_2$ thermal expansion coefficient and elastic modulus mismatch appeared to contribute to fracture toughening in $\beta$-SiC+39vol.%$ZrB_2$ electroconductive ceramic composites.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.503-508
• /
• 2010

$Eu^{2+}$-doped $\beta$-SiAlONs ($Si_{6-z}Al_zO_zN_{8-z}:Eu_y$) are recognized as promising phosphor materials to build an white LED for lighting application due to its excellent absorption/emission efficiency in the long wave length region. In this research, the fabrication of $\beta$-SiAlON:Eu plate phosphor by sintering was investigated with fixed Eu content(y) and varied composition of the host lattice(z). The addition of the activator $Eu_2O_3$ lead to enhanced densification by forming the transient liquid phase. The refinement of a composition by the calculated lattice parameter indicated that the measured composition of the fabricated specimens is nearly same to that of designed one. The single phase $\beta$-SiAlON:Eu plate with relative density of 96.4% was achieved by addition of 2 wt% CaO, which implies the possibility of full densification by adjusting the processing variables.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.2 s.43
• /
• pp.1-8
• /
• 2007

A flat fluorescent lamp (FFL) was developed as a light source for LCD TV Backlight. The channels of FFL were realized by forming the flat glass at high temperature. The performance of the backlight with FFL was shown to improve by optimizing the FFL channel profile that has elliptical shape, 4.4 mm height and 1.4 mm sealing distance. In this paper, the brightness uniformity of LCD TV backlights was investigated by optical simulation of FFL channel profiles. The brightness of LCD TV using FFL with the optimized channel profile was shown to be $576\;cd/m^2$.

• The Korean Journal of Community Living Science
• /
• v.18 no.3
• /
• pp.399-406
• /
• 2007

Soybean seeds were fermented by Bacillus subtilis and/or Lactobacillus bulgaricus to improve solubility, viscosity, water holding capacity and oil holding capacity of soybean proteins in Chongkukjang. The maximum colony forming unit and protease activity of B. subtilis or L bulgaricus were observed after 60 hours of fermentation, and those of the mixed fermentation by two microorganisms were steadily increased during the fermentation periods. Solubilities of soybean proteins by B. subtilis or L bulgaricus were steadily increased before the values were considerably increased to 60 hours of fermentation, whereas water holding capacities of the proteins were decreased by B. subtilis or L. bulgaricus and those of the mixed fermentation were decreased progressively. Viscosities of soybean proteins by B. subtilis and/or L. bulgaricus were decreased progressively during the fermentation. Viscosities of soybean proteins by B. subtilis and/or L. bulgaricus were decreased progressively during the fermentation. Oil holding capacities of soybeans by B. subtilis or L. bulgaricus were maximum at 20 or 80 hours of fermentation and those of the mixed fermentation were decreased after 10 hours of the fermentation.

• Advanced Composite Materials
• /
• v.16 no.4
• /
• pp.269-282
• /
• 2007

Fully biodegradable high strength composites or 'advanced green composites' were fabricated using yearly renewable soy protein based resins and high strength liquid crystalline cellulose fibers. For comparison, E-glass and aramid ($Kevlar^{(R)}$) fiber reinforced composites were also prepared using the same modified soy protein resins. The modification of soy protein included forming an interpenetrating network-like (IPN-like) resin with mechanical properties comparable to commonly used epoxy resins. The IPN-like soy protein based resin was further reinforced using nano-clay and microfibrillated cellulose. Fiber/resin interfacial shear strength was characterized using microbond method. Tensile and flexural properties of the composites were characterized as per ASTM standards. A comparison of the tensile and flexural properties of the high strength composites made using the three fibers is presented. The results suggest that these green composites have excellent mechanical properties and can be considered for use in primary structural applications. Although significant additional research is needed in this area, it is clear that advanced green composites will some day replace today's advanced composites made using petroleum based fibers and resins. At the end of their life, the fully sustainable 'advanced green composites' can be easily disposed of or composted without harming the environment, in fact, helping it.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.1
• /
• pp.124-130
• /
• 2008

Streptococcus (Strep.) agalactiae is one of the major pathogens of bovine mastitis and is the main cause of subclinical infection. This study attempted to develop a rapid PCR diagnosis procedure using milk samples collected on filter paper disks. Chromatographic filter paper was employed as the preservation media and kept at room temperature for one to four weeks. The revival rate of Strep. agalactiae kept on dried filter paper disks was affected by the pretreatment preservation time. The revival test suggested that not all the bacteria in artificially contaminated milk samples on the filter paper disks could be recovered. After that, a PCR based on the 16-23S intergenic spacer region of Strep agalactiae was performed. The results distinguished the strep. agalactiae from major pathogens of bovine mastitis at a $2{\times}10^2$ colony forming units (CFU)/ml level, which showed similar sensitivity to the results from liquid milk samples. The results also showed that milk samples collected on filter paper disks could be kept at room temperature for one to four weeks with little negative effect on sensitivity and specificity. The field test showed that the diagnostic sensitivity and specificity was 96.15% and 98.60%, respectively. In conclusion, the protocol will provide a rapid and economic procedure for the detection of bovine mastitis.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.04a
• /
• pp.23-46
• /
• 2002

The cryogenic, pressure swing adsorption and membrane methods have been used to separate air into nitrogen and oxygen. The air separation membrane is made of the polymers, of which manufacturing process is complicate and it causes a little high production cost. Polymer membrane has temperature limit in usage and low durability even at moderate temperature. Therefore, inorganic membranes have been studied for years. As formation of unit alumino-silicate membrane, unit cells of membrane were made with a few coating methods. In this study the dipping of substrate into sols, application of vacuum to the opposite side of substrate with coating and rotating of the substrate in the sols were found as good coating memthods to make a uniform coating and to control the thickness of membrane. The membrane coats were examined by SEM and XRD. The sample ESZl-1 was compared with those of samples that prepared by another method. The present developed coating methods could be applied to the various types of zeolite membrane formation, that is A- X-, Y- ZSM- and MCM-types of membranes. Also these membrane forming methods could be applied to formation of catalyst absorbed zeolite membrane, of which zeolite absorb the catalytic metals. The product obtained from these coating methods could be applied to the industrial gas and liquid phase catalytic reaction and separation processes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.67-70
• /
• 2002

The composites were fabricated 61vol% ${\beta}$-SiC and 39vol.% $TiB_2$ powders with the liquid forming additives of 8, 12, 16wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at $1650^{\circ}C$ for 4 hours to form YAG. The result of phase analysis of composites by XRD revealed ${\alpha}$-SiC(6H), $TiB_2$, and YAG($Al_5Y_3O_{12}$) crystal phase. The relative density and the Young's modulus showed the highest value of 82.29% and 54.60 Gpa for composites added with 16wt% $Al_2O_3+Y_2O_3$ additives at room temperature.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.510-514
• /
• 2003

We have studied the alignment of liquid crystals (LCs) on homeotropic polymeric surface that is scanned using an atomic force microscope (AFM) tip by optical polarizing microscopy and computer simulation. The scanned areas on one substrate are 5 $\mu\textrm{m}$ ${\times}$ 5 $\mu\textrm{m}$, 10 $\mu\textrm{m}$ ${\times}$ 10 $\mu\textrm{m}$, and 20 $\mu\textrm{m}$ ${\times}$ 20 $\mu\textrm{m}$ and this substrate is assembled to another substrate coated. with homeotropic polymer. The fabricated micro-LC cell using two substrates does not show any hysteresis and disclination lines inside the nano-rubbing areas, while changing voltage up and down. This indicates that the pretilt angle exists in the areas, thereby forming a hybrid LC configuration. From the experimental and computer simulation results, we can understand that the AFM rubbing clearly changes surface status of homeotropic alignment layer and causes the pretilt angle to an initial scanning direction.