• 설비공학논문집
• /
• 제14권5호
• /
• pp.365-376
• /
• 2002

An experimental study has been conducted to measure the local film-cooling effectiveness and the heat transfer coefficient for a single row of rectangular-shaped holes. four different cooling hole shapes such ai a straight rectangular hole, a rectangular hole with laterally expanded exit, a circular hole and a two-dimensional slot are tested. A technique using thermochromic liquid crystals determine adiabatic film cooling effectiveness values and heat transfer coefficients on the test surface. Both film cooling effectiveness and heat transfer coefficient are measured for various blowing rates and compared with the results of the cylindrical ho1es and the two-dimensional slot. The flow patterns downstream of holes are calculated numerically using a cummercial package. The results show that the rectangular hopes provide better peformance than the cylindrical holes. For the rectangular holes with expanded exit, the penetration is reduced significantly, and the higher and more uniform cooling Peformance is obtained even at relatively high blowing rates.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.243-247
• /
• 2007

An experiment was conducted to observe the safranine penetration depth in radial directions of Populus tomentiglandulosa. Radial penetration was considered from bark to pith. In radial direction, ray parenchyma and intercellular space were considered for the measurement of safranine penetration depth. It was found that sapwood conducted safranine 24.23% higher in radial direction compared with heartwood. Intercellular space conducted safranine 39.27% higher depth compared with ray parenchyma and the penetration depth was 39.41% higher in sapwood compared to heartwood. During safranine penetration, it formed a curvature in the lumen of ray parenchyma. Initially safranine penetration was found high and decreased gradually.

• 한국화재소방학회논문지
• /
• 제8권1호
• /
• pp.3-8
• /
• 1994

A new test system was established to measure the flame extinguishing concentration of Halon alternatives. The main characteristic of this system is to use the solid paraffin with a wick instead of liquid fuel, such as n-Heptane. Our results showed that the extinguishing concentration of compounds was lower than that of other existing data, but the trend was consistent with others. The flame extinguishing concentration of all tested compounds were not almost effected by gas flow velocity. The system produces good reliable data with a minimum error for measuring the flame extinguishing concentration. Therefore our new system can be utilized as a standard equipment to evaluate Halon alternatives.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.678-687
• /
• 2012

Concentration fields of solid powder in a liquid fuel were quantitatively measured by a visualization technique. The measurement system consists of a camcoder and three LCD monitors. The solid powder (glass powder) were filled in a head tank which was installed over a main mixing tank ($D{\times}H$, $310{\times}370mm$). The main mixing tank was filled with JetA1 fuel oil. With a sudden opening of the upper tank by pressurized nitrogen gas with 1.9 bar, the solid powder were poured into the JetA1 oil. An impeller type agitator was being rotated in the mixing with 700 rpm for the enhancements of mixing. Uniform visualization for the mixing flow field was made by the light from the three LCD monitors, and the visualized images were captured by the camcoder. The color images captured by the camcoder The color information of the captured images was decoded into three principle colors R, G, and B to get quantitattive relations between the concentrations of the solid powder and the colors. To get better fitting for the strong non-linearity between the concentration and the color, a neural network which has strong fitting performances was used. Analyses on the transient mixing of the solid powders were quantitatively made.

• 대한기계학회논문집B
• /
• 제23권6호
• /
• pp.734-743
• /
• 1999

The local Nusselt numbers have been measured for a round turbulent jet impinging on the concave surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 4 to 10, the dimensionless surface curvature (d/D) 0.056, and the rib type (height ($d_1$) 0.2 cm, pitch (p) from 1.2 to 3.2 cm). It was founded that only when $L/d{\geq}6$, the average Nusselt numbers on the concave surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by the effect of rib attached to the wall surface. It was realized that the rib attached to the concave surface may no longer enhance the heat transfer rate or even lowers it depending on the rib type and flow conditions. In addition, the results by the steady-state method using the gold-film Intrex were in good agreement with those by the transient shroud method.

• 공업화학
• /
• 제19권3호
• /
• pp.338-344
• /
• 2008

냉 난방 수요에서 일어나는 환경오염의 최소화와 화석연료 소비를 감소시키기 위해서 에너지보존을 개선시키는 것은 필수적이다. 이러한 점에서 흡수식 열펌프기술은 에너지 절약을 위해서 많은 가능성을 가지고 있다. 흡수식 열펌프는 에너지를 주입하지 않고 폐열의 이용을 높일 수 있는 방법이다. 흡수식 열펌프는 흡수기에서 흡수된 양의 증가가 매우 중요하기 때문에 흡수기 성능이 매우 중요하다. 본 연구에서는 흡수기의 성능을 개선시키기 위해서 메탄올과 글리세린을 작동유체로 하는 내벽에 나선형관을 설치하여 액상을 접선방향으로 공급하는 흡수기에 관한 연구를 수행하였다. 이 방법은 액상흐름에서 난류를 일으켜 물질 및 열전달을 증가시킨다. 흡수기의 각 위치에서 온도와 농도를 측정하여 열전달계수와 물질전달계수를 계산하였고 주입부분에서 열 및 물질전달이 향상되었음을 알 수 있었다.

• 한국항공우주학회지
• /
• 제36권11호
• /
• pp.1087-1093
• /
• 2008

고성능 로켓엔진용 연소기에서 열적 건전성을 확보하기 위해 적용되는 재생냉각 채널은 채널의 분기/병합, 방향 전환과 같이 복잡한 유동구조를 포함한다. 냉각유로에서 발생하는 압력 손실을 마찰과 국소유동저항으로 나눠, 각각의 유동조건에 따라 경험적으로 제시된 문헌상의 계수를 적용함으로써, 재생냉각유로 설계에 효과적으로 적용할 수 있도록 수력학적 자료를 구하였다. 해석의 타당성을 검증하기 위하여 실물형 연소기의 냉각유로 설계안에 적용하였다. 먼저, 물을 사용하였을 때 모사시제를 사용한 수류시험 결과와 비교하였다. 정량적으로 타당한 결과를 얻은 것으로 확인되어, 실유체인 케로신을 사용한 수력해석을 수행하여 CFD 결과와 비교하여 수력해석 방법의 타당성을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제34권11호
• /
• pp.1027-1033
• /
• 2010

2상유동(기체-액체) 현상은 전자기발전, 원자력발전, 철강산업 등 유체 시스템에 자주 나타나는 현상으로, 2상유동을 파악하는 것은 유체 시스템의 안정성 및 성능을 위해 중요하다. 2상유동 특성 중 기공률은 압력강하와 열전달 성능을 결정하는 주요 인자로서 이를 측정하는 기술이 특히 중요하다. 유동의 임피던스를 측정하여 기공률을 산정하는 임피던스법은 전기적 특성을 이용하기 때문에 반응속도가 빨라 실시간 측정이 가능하며, 유동관 벽에 전극을 설치할 경우 유동 교란없이 측정할 수 있는 장점이 있다. Coney는 원형관에 적용할 수 있는 ring 임피던스미터를 이론적 연구하였다. 본 연구에서는 Coney가 이론적으로 제안하고 실험적으로 검증하지 못한 3-ring 임피던스미터의 유체 전기전도도에 대한 독립성을 실험적으로 검증하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.892-895
• /
• 2017

대형 가스터빈 연소기 구성품인 단일 압력선회식 연료분사기(Pressure swirl simplex liquid injector)를 설계, 분무특성 및 성능을 시험을 통해 평가하였다. 공급 압력 대비 분무 유량을 측정하여 설계점 기준 분무유량과 비교하였으며 섀도우그래프(Shadowgraph)를 통해 분무가시화이미지를 기록, 분무의 형상을 정성적으로 파악하고 분무각을 측정하였다. 시험 결과 동일한 공급압력 대비 측정된 분무유량은 설계점 기준 유량과 거의 일치하여 설계 및 제작의 정합성이 확인되었으며 섀도우그래프 이미지를 통해 연료분사기의 분무형상을 파악하고 설계 의도된 분무각이 나타남을 확인할 수 있었다. 이를 기반으로 향후 PDA(Phase Doppler Anemometry)를 통한 분무측정을 통해 보다 구체적인 연료 분사기의 분무 성능 및 특성을 파악할 수 있을 것으로 기대된다.