• Macromolecular Research
• /
• v.11 no.4
• /
• pp.224-230
• /
• 2003

The blends of polypropylene (PP) with glass filled thermotropic liquid crystalline polymer (LCP-g) have been prepared by melt mixing techniques at different blend ratios. The thermal, dynamic mechanical, crystalline and morphological characteristics of these blends were investigated. Higher percent crystallinity was observed for 10% level of LCP-g in the blend in comparison to that of other blend ratios. The thermal stability increased with LCP-g concentration in the blend with PP. The variation of storage modulus, stiffness and loss modulus as a function of blend ratios suggested the phase inversion at the 50% level of LCP-g in the blend. The scanning electron microscopy (SEM) photographs showed the creation of voids and destruction of the fiber structures during the dynamic mechanical measurements. Processing behavior of the blends depended on the fiber forming characteristics of LCP-g, which again varied with the molding temperatures.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.81-87
• /
• 2005

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared by the melt mixing technique. Mechanical, XRD, thermal and dynamic mechanical investigations are reported for the pure silicone rubber and blends. The mechanical properties, viz. the tensile strength, tear strength and elongation at break, of the silicone rubber decreased with the addition of LCP. The SEM study on the tensile fractured surface of the blends revealed that they had a two phase structure, and that the failure was mainly due to fiber pull out, which suggests that the VMQ and LCP are incompatible in all of the proportions examined in this study. However, the FTIR study shows that there was a partial interaction between the VMQ and LCP, but which may not be sufficient to grip the fibrils under the applied load. In the XRD analysis, it was observed that the crystalline structure of the silicone rubber deteriorated in the presence of LCP. The DMA study suggested that the storage modulus of the silicone rubber was improved with the addition of LCP, due to the high modulus of the LCP phase. The thermal stability of the silicone rubber was greatly reduced by the addition of LCP, due to the latter having a thermal stability lower than that of silicone rubber.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.261-266
• /
• 2006

Blends of silicone rubber (VMQ) and liquid crystalline polymer (LCP) were prepared using a melt blending technique in the presence and absence of glass fiber and coupling agents. The effect of glass fiber and coupling agents on the thermal, dynamic mechanical, morphological pro-perties and cure characteristics of VMQ/LCP blends were studied. The vinyl silane coupling agent showed a significant effect on the above mentioned properties of VMQ/LCP blends by reacting at the interface between VMQ and LCP. The viscosity of the VMQ/LCP blends decreased with the addition of a coupling agent. A substantial improvement in storage modulus of VMQ/LCP blends was observed in the presence of glass fiber and coupling agents. However, as a coupling agent vinyl silane proved to be better than amine for the VMQ/LCP-glass-containing blends. The thermal stability of the pure silicone rubber was higher than those of the blends. This high thermal stability of silicone rubber was attributed to the Si-O-Si bonds. However, the thermal stability of the blends decreased further in the presence of a coupling agent, possibly due to a decrease in blend crystallinity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.641-644
• /
• 2009

We demonstrated a solvent-assisted soft-lithographic patterning method for producing patterned structure and patterned ordering with lyotropic liquid crystalline polymer (LCP) film. Experimental results showed that the liquid crystalline ordering of lyotropic film could be controlled by shearing effects of the fluidic solvent though the patterned mold channels. In this work, two types of lyotropic LCPs were used to investigate the effects of the alkyl chain length of the lyotropic LCP on producing liquid crystalline ordering through the solvent-assisted fluidic patterning.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1703-1711
• /
• 2000

Microstructural morphology of molded composites of thermotropic liquid crystalline polymer(LCP) and polyamide 6 (PA6) has been studied as a function of epoxy fraction. Injection-moulding of a thin composite plaque at a temperature below the melting point of the LCP fibrils by suing the extruded LCP/PA6 pellets produced multi-layered structures: 1) the surface skin layer with thickness of 65-120 ym exhibiting a transverse orientation, 2) the sub-skin layer with an orientation perpendicular to the surface skin, i.e. in the flow direction, 3) the core layer with arc-curved flow patterns. Similar microstructural orientations were observed in the respective layers for the composite plaques with different fractions of epoxy.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.50-56
• /
• 1998

폴리아릴레이트(PAr)와 열방성 액정고분자(LCP)블렌드의 상용성과 두 고분자 사이 의 에스터 교환반응을 시차 주사 열분석기 (DSC)와 Fourier transform 적외선 분광분석기 (FT-IR spectroscopy)로 연구하였다. DSC를 이용하여 PAr-LCP 블렌드의 유리전이온도 (Tg)를 관찰한 결과, 두 개의 Tg가 관찰되었다. 측정된 Tg 결과로부터 블렌드 각 상에 녹아 있는 두성분의 상거동을 조사했으며 그결과 LCP가 PAR-rich 상에 녹아 들어간 양이 PAr 이 LCP-rich 상에 녹아 들어간 양보다 더 많음을 알수 있었다. 이러한 결과는 두 고분자 사 이에 부분적으로 상용성이 있음을 의미한다. 액정고분자의 이방성을 고려하여 PAr-LCP 블 렌드의 고분자-고분자 상호작용계수($\chi$12)는 0.069~0.076의 값으로 계산되었다. 두 고분자사 이의 에스터 교환반응를 조사하기 위하여 DSC내에서 열처리한 결과, 열처리 후에 PAr과 LCp의 Tg는 열처리하기 전에 비해 더 큰폭으로 두 Tg의중간값으로 이동하였다. 열처리한 PAr-LCP 블렌드를 FT-IR spectroscopy로 분석한 결과, 순수한 PAr과 LCP에 없는 새로운 에스터기의 특성피이크가 발견되었다. 이와 같은 열분석과 FT-IR spectroscopy 연구 결과 로부터 주어진 열처리 조건에서 PAr과 LCP 사이에 에스터 교환반응이 일어났음을 확인할 수 있었다.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.176-182
• /
• 2011

Liquid crystalline aromatic polyesters (LCPs) are representative examples of thermotropic liquid crystalline polymers, whose structure-property relationships have been the subject of many researches. In this study, we synthesized organo-soluble liquid crystalline aromatic polyesters, and their composites with acetylene-terminated thermoset resins were prepared and characterized. Soluble LCPs were synthesized by employing 6-hydroxy-2-naphthoic acid, terephthalic acid, isophthalic acid, and 4-aminophenol as monomers via condensation polymerization based on transesterfication and transamidation. Acetylene-terminated thermoset resins were synthesized by the reaction of 4-ethynylaniline with terephthaloyl dichloride, isophthaloyl dichloride or 4,4'-biphenyldicarbonyl dichloride. We prepared the soluble LCP/thermoset composites by solution blending followed by thermal treatment. The thermal stability, thermal expansion coefficient, and dielectric properties of the composite were studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.433-435
• /
• 2005

We have studied the realigning behavior of liquid crystal molecules in liquid crystalline polymer/liquid crystal(LCP/LC) system when they are exposed to external stimulation such as bending and pressing. The birefringence of the LCP/LC in a flexible display device was measured as a function of bending or pressing deformation. The microscopic dynamic behavior of main chain, side chain, and the LC were characterized by FTIR and polarization optical microscopy. When the device is deformed in scattering memory state, liquid crystal(LC) director is found to align from randomly oriented domain state(scattering state) to homeotropic state.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.132-132
• /
• 2006

Filler loading (fiber or particulate) usually increases the melt viscosity of polymers. In contrast, the addition of these fillers and fibrillation of thermotropic liquid crystalline polymer (LCP) jointly decreased the viscosity of polymer melts to lower than those of pure component polymers, filler-loaded or LCP-blended ones; and even decreased the viscosity with increasing filler loading. Termed as rheological hybrid effect, this phenomenon correlated well with the LCP fibrillation in these ternary systems. Research taking fillers of various shapes and sizes showed that the filler addition promoted the LCP fibrillation, depending upon thermodynamic and dynamic factors involved.

• Korea-Australia Rheology Journal
• /
• v.11 no.4
• /
• pp.269-273
• /
• 1999

Immiscible polymer blends containing a liquid crystalline polymer dispersed phase can be described by existing blend theories when the dispersed-phase droplets are large relative to the orientation correlation length ("domain size") of the LCP. There does not appear to be an interfacial contribution to the linear viscoelastic properties of the blend from droplets smaller than the correlation length. Polyester blends, where interfacial interactions occur between the LCP and the matrix, exhibit a reduction in viscosity to below the viscosity of either component at low shear rates, where the droplet morphology is spherical. These anomalies cannot be explained in the context of existing theory.ng theory.