• 제목/요약/키워드: Liquid crystalline

검색결과 493건 처리시간 0.028초

염모제의 자극 완화 기술 (Abirritant Technology of Hair Coloring)

  • 이민정;문효승;박재정;김종협;박병권;김태윤;김왕기;김덕희;박준성;한상훈;백석윤
    • 대한화장품학회지
    • /
    • 제36권4호
    • /
    • pp.289-294
    • /
    • 2010
  • 이 연구에서 우리는 두피 자극을 완화시킬 수 있는 두피보호파우더를 개발하였으며 이 파우더를 염모제와 혼합하여 사용함으로써 디아민계 염료에 의한 자극이 감소됨을 임상시험을 통하여 확인하였다. 또한 염색력이 향상되고, 두피의 자극과 모발 손상의 완화 효과를 기대할 수 있었다. 이와 함께 본 연구에서의 염모제형은 액정 구조를 가짐으로써 염색력 증진과 암모니아 취 감소 효과를 나타냈다.

새로운 poly(acrylonitrile-itaconate)공중합체를 기초로 한 젤-전해질의 특성 (Characterization of a New Poly(acrylonitrile-itaconate) based Gel-electrolyte)

  • 최병구;김소희;공명선
    • 전기화학회지
    • /
    • 제3권3호
    • /
    • pp.169-172
    • /
    • 2000
  • Polyacrylonitrile (PAN) 고분자의 유기용매 함유능을 증대시키기 위하여 PAN을 수정한 새로운 polyacrylonitrile-co-bis[2-(2-methoxyethoxy)ethyl]itaconate (PANI로 약칭) 공중합체를 합성하였다. PAN과 PANI의 혼합 고분자에 ethylene carbonate (EC)와 dimethyl carbonate (DMC)의 혼합유기용매, $LiClO_4$ 염을 혼합한 젤 고분자 전해질을 제조하였다. 상온에서의 이온전도도는 25PAN +10PANl +50EC/DMC+$15LiClO_4$ 조성의 전해질에서 $2\times10^{-3}\; Scm^{-1}$로 가장 높은 값을 나타내었다. 이는 PANI의 혼합으로 인하여 유기용매 영역의 결정질 성분이 줄어들고, 따라서 전하운반자의 수가 증가하기 때문인 것으로 분석하였다. PANI를 고분자 기질로 적당량 첨가하면, PAN만을 단용으로 사용한 젤-전해질에 비해 기계적 강도가 감소하는 단점이 있기는 하지만, 이온전도성, 열적 특성, 용매와의 혼화성, 전기화학적 안정성, 리튬 전극과의 계면 안정성 등 거의 모든 면에서 성능이 개선되는 것으로 나타났다.

Emulsion Properties of Pseudo-Ceramide PC104/Water/Polyoxyethylene Cholesteryl Ether and Polyoxyethylene Cetyl Ether Mixtures.

  • Kim, Do-Hoon;Oh, Seong-Geun;Lee, Young-Jin;Kim, Youn-Joon;Kim, Han-Kon;Kang, Hak-Hee
    • 대한화장품학회:학술대회논문집
    • /
    • 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
    • /
    • pp.330-342
    • /
    • 2003
  • The formation of emulsions and micelles in water/ceramide PC104/CholE $O_{20}$/C$_{16}$E $O_{20}$ and water/ceramide PC104/CholE $O_{20}$ mixtures was investigated through the phase behavior studies. The phase diagrams showed the existence of micelle and emulsion regions in both systems. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) showed the wider micellar and emulsion regions than the single surfactant system (CholE $O_{20}$). From FT-IR measurements, it was found that the polyoxyethylene (POE) groups of surfactants formed the hydrogen bonds with amido carbonyl group in ceramide PC104. This result indicated that the hydrophilic part (EO) of surfactants could stabilize the lamellar structure and emulsion of ceramide PC104. The mixed surfactant system (CholE $O_{20}$/C$_{16}$E $O_{20}$) resulted in the smaller emulsion droplet size due to the effect of curvature at the interface, thus further increasing emulsion stability. With the penetration of $C_{16}$E $O_{20}$into the interfacial layer of surfactants in emulsion, the curvature of the interface might be altered for the formation of smaller emulsion droplets. The mixed surfactant system could incorporate up to 4 wt. % of ceramide PC104 into emulsion more than single surfactant system.ystem.m.

  • PDF

Cholesteryl Isopropyl Carbonate의 결정구조에 관한 예비연구 (Preliminary Study on the Crystal Structure of Cholesteryl Isopropyl Carbonate)

  • 박영자
    • 한국결정학회지
    • /
    • 제7권2호
    • /
    • pp.126-132
    • /
    • 1996
  • Cholesteryl Isopropyl Carbonate(C31O3H52)의 결정구조를 X-선 회절법으로 연구하였다. 결정의 공간군은 P212121이고, 단위세포 길이는 a=6.266(4), b=10.836(5), c=47.364(20)Å, Z=4, Dc=0.98 g/cm3 이고, Dm=1.01 g/cm3이다. 회절강도들은 Nonius CAD-4 diffractometer로 얻었으며, graphite-monochromatized MoKα radiation를 사용하여 2θ로 40°까지 얻었다. 분자구조는 직접법으로 풀었으며, 정밀화는 Fourier 법과 최소자승법으로 수행하였다. 현재 R값은 0.22로 아직 풀어야 할 연구과제로 남아있다. 이 화합물의 cholesterol 부분의 구조는 다른 화합물과 비교적 잘 일치하고 있다. 결정에서 분자들이 길게 c-axis에 평행하게 놓여있고, monolayer을 이루며 쌓여있는데 cholesterol 부분은 촘촘하게 모여있는 반면 isopropyl carbonate chain들은 느슨하게 모여있어 이 결정의 liquid crystalline state성질을 나타냄을 구조로서 설명하여 준다.

  • PDF

산화물계 SEN내화물의 슬래그 라인부 침식특성 연구 (Study on the Corrosion Characteristics in the Slag Line of SEN Oxide Refractory)

  • 성영택;손정훈;이승석;배동식
    • 한국재료학회지
    • /
    • 제24권1호
    • /
    • pp.53-59
    • /
    • 2014
  • The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

Sol-Gel법에 의한 ${Ta_2}{O_5}$ 박막의 전기전도와 광학적 특성 (The Electrical Conduction and Optical Properties of ${Ta_2}{O_5}$ Thin Films by Sol-Gel Method)

  • 유영각
    • 한국전기전자재료학회논문지
    • /
    • 제13권7호
    • /
    • pp.575-582
    • /
    • 2000
  • The Electrical conduction and optical properties of Ta$_{2}$/O$_{5}$ thin films as the insulators in DRAM capacitors were studied. Liquid Ta/sib 2//O sub 5/ were prepared by a sol-gel processing and multiple layers were applied by spin-coating up to thickness of 800$\AA$. At annealing temperature of 300~$600^{\circ}C$ the electrical conduction and specific dielectric constant were discussed the behaivor of carrier were observed by the Thermally Stimulated Current (TSC) at the temperature range of 30~23$0^{\circ}C$. At annealing temperature of 300~$600^{\circ}C$ the samples were found to be amorphous below $600^{\circ}C$ and crystalline over it. The electrical strength was about 2.2 MV/cm at 40$0^{\circ}C$. In spite of noncrystallization over 50$0^{\circ}C$ the increasing of leakage current due to pinholes and increasing creak. The refractive index was obtained maximum (2.2) at 40$0^{\circ}C$. The dielectric constant was obtained maximum(18.6) at 40$0^{\circ}C$. TSC was observed one peak at the temperature range of 30~23$0^{\circ}C$ from sample at 40$0^{\circ}C$. In the case of collecting voltage the peak size is decreased in proportion to collecting voltage and then the peak may be thought carrier to be a ionic space charge.e.

  • PDF

고분자 전해질막 수소 연료 전지 분리판 용 흑연/폴리프로필렌/액정고분자 복합 재료의 특성에 관한 연구 (Study on Graphite/Polypropylene/Liquid Crystalline Polymer Composite for a Bipolar Plate of Polymer Electrolyte Membrane Fuel Cell)

  • 비라즈 둔가나;손영곤
    • 한국산학기술학회논문지
    • /
    • 제16권5호
    • /
    • pp.3627-3632
    • /
    • 2015
  • 고분자 전해질 막 연료전지의 분리판 용 흑연/폴리프로필렌(PP)/액정고분자 (LCP) 복합소재의 기계적, 유변학 특성 및 전기전도도에 관하여 연구하였다. 저분자량 PP를 바인더로 사용하는 경우 다른 열가소성 고분자와 비교하여 상당히 높은 전기 전도도를 보임을 확인하였는데 이는 점도가 낮은 PP에 의해 흑연 입자의 분산이 향상되어 나타난 결과임을 확인할 수 있었다. 또한 탄소나노튜브를 소량 첨가하면 복합재료의 전기전도도가 크게 증가하였고 산처리를 하여 산소 관능기를 포함한 탄소나노튜브를 첨가했을 때에는 전기전도도의 증가가 거의 없었다. 이로부터 탄소나노튜브는 비극성 고분자와 친화도가 높음을 알 수 있었다. 저분자량 PP를 바인더로 사용하였을 때는 복합재료의 점도가 사출성형이 가능할 정도로 낮은 것을 관찰할 수 있었다. 그러나 기계적인 강도는 다른 고분자에 비해 현저히 낮았다. 이를 보강하기 위하여 LCP를 혼합하여 복합재료를 제조한 결과 전반적인 물성 밸런스가 잘 맞는 복합재료를 얻을 수 있었다.

Combined effects of soy isoflavone and lecithin on bone loss in ovariectomized mice

  • Kim, Sang Baek;Assefa, Freshet;Lee, Su Jeong;Park, Eui Kyun;Kim, Sung Soo
    • Nutrition Research and Practice
    • /
    • 제15권5호
    • /
    • pp.541-554
    • /
    • 2021
  • BACKGROUND/OBJECTIVES: Isoflavones (ISFs) are effective in preventing bone loss, but not effective enough to prevent osteoporosis. Mixtures of soy ISF and lecithin (LCT) were prepared and characterized in an attempt to improve the bone loss. MATERIALS/METHODS: The daidzein (DZ) and genistein (GN) solubility in soy ISF were measured using liquid chromatography-mass spectrometry. The change in the crystalline characteristics of soy ISF in LCT was evaluated using X-ray diffraction analysis. Pharmacokinetic studies were conducted to evaluate and compare ISF bioavailability. Animal studies with ovariectomized (OVX) mice were carried out to estimate the effects on bone loss. The Student's t-test was used to evaluate statistical significance. RESULTS: The solubility of DZ and GN in LCT was 125.6 and 9.7 mg/L, respectively, which were approximately 25 and 7 times higher, respectively, than those in water. The bioavailability determined by the area under the curve of DZ for the oral administration (400 mg/kg) of soy ISF alone and the soy ISF-LCT mixture was 13.19 and 16.09 ㎍·h/mL, respectively. The bone mineral density of OVX mice given soy ISF-LCT mixtures at ISF doses of 60 and 100 mg/kg daily was 0.189 ± 0.020 and 0.194 ± 0.010 g/mm3, respectively, whereas that of mice given 100 mg/kg soy ISF was 0.172 ± 0.028 g/mm3. The number of osteoclasts per bone perimeter was reduced by the simultaneous administration of soy ISF and LCT. CONCLUSIONS: The effect of preventing bone loss and osteoclast formation by ingesting soy ISF and LCT at the same time was superior to soy ISF alone as the bioavailability of ISF may have been improved by the emulsification and solvation of LCT. These results suggest the possibility of using the combination of soy ISF and LCT to prevent osteoporosis.

Refinement of Gd2O3 inclusions in the GdBa2Cu3O7-δ films fabricated by the RCE-DR process

  • Park, I.;Oh, W.J.;Lee, J.H.;Moon, S.H.;Yoo, S.I.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제20권4호
    • /
    • pp.46-49
    • /
    • 2018
  • To improve in-field critical current densities ($J_c$) of $GdBa_2Cu_3O_{7-{\delta}}$ (GdBCO) coated conductors(CCs) fabricated by the reactive co-evaporation by deposition and reaction (RCE-DR) process, employing the nominal composition of Gd:Ba:Cu=1:1:2.5, we tried to refine the $Gd_2O_3$ particles trapped in the GdBCO superconducting matrix. For this purpose, we carefully selected the processing conditions on the stability phase diagram of GdBCO for this composition. By lowering the growth temperature of $Gd_2O_3$ in the liquid, we could refine the average particle size of $Gd_2O_3$ particles trapped in the GdBCO matrix and also achieve the zero-resistive transition temperatures ($T_{c,zero}$) of 92.3~94.2 K. Unfortunately, however, it was unsuccessful to achieve enhanced in-field $J_c$ values from these samples because of an air-contamination of the amorphous precursor film before its conversion into crystalline GdBCO film, suggesting that any exposure of the amorphous precursor film to air is fatal in obtaining high performance GdBCO CCs via the RCE-DR process.

극성 오일, 비이온성 계면활성제를 포함한 계에서의 Videomicroscopy를 이용한 동적 거동에 관한 연구 (Dynamic Behavior Study Using Videomicroscopy in Systems Containing Polar Oils and Nonionic Surfactant)

  • 임종주
    • 공업화학
    • /
    • 제8권3호
    • /
    • pp.473-481
    • /
    • 1997
  • Videomicroscopy를 이용하여 비이온성 계면활성제 수용액과 oleyl alcohol, oleic acid와 같은 극성 오일을 접촉시켰을 때 일어나는 동적 거동을 관찰하였다. Vertical-stage의 현미경을 사용하여 비이온성 계면활성제 수용액상 위에 동일한 부피의 오일상을 주입하여 두 상을 접촉시켰을 때 일어나는 계면활성들, 특히 detergency 결과에 중요한 영향을 미치는 중간상 형성, 확산에 의한 과포화로 인하여 일어나는 자발적 유화 현상 등을 관찰하였다.극성 오일로 각각 oleyl alcohol과 oleic acid를 사용하여 1wt% $C_{12}E_5$ 수용액과의 동적 거동을 관찰한 결과는 동일한 경향을 나타내었다. 즉 운점보다 낮은 온도 조건에서는 오일상과 계면활성제 수용액상의 상호작용이 거의 없는 것을 관찰할 수 있었으며, oleyl alcohol을 사용하여 운점보다 높은 온도 조건인 $35^{\circ}C$, $40^{\circ}C$, $51.7^{\circ}C$에서 실험한 lamellar liquid crystal이 중간상으로 형성되었고 확산에 의한 과포화로 인한 자발적 유화 현상을 관찰할 수 있었다. 또한 oleyl alcohol 시스템에 대한 개략적인 상 평형도를 이용하여 각 온도 조건에서 oleyl alcohol과 계면활성제 수용액상이 접촉할 때 일어나는 중간상의 생성 및 자발적 유화 현상 등의 동적 현상들을 diffusion path를 사용하여 이해하였다.

  • PDF