• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.855-858
• /
• 2003

Liquid Phase Epitaxy (LPE)법으로 Yttrium Iron Garnet (YIG:Y$_3$Fe$_{5}$O$_{12}$) 단결정 후막을 성장시킬 때 PbO계 응제에서는 Pb 이온이 성장되는 결정내로 혼입되어 성장된 막의 격자상수를 증가시키고, 일축 자기이방성 상수값(Ku)을 변화시키거나 전기 전도도를 변화시킨다. 또한 광 흡수율을 증가시키는 등의 성장된 막의 물성에 악영향을 미친다. 열처리 후 Pb 이온의 휘발로 인한 결정내의 농도감소로 성장된 단결정 후막의 격자상수가 평균 0.0115$\AA$ 감소하였다.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.140-146
• /
• 2020

We investigated light extraction film based on polymer dispersed liquid crystal (PDLC) for application in organic light emitting diodes (OLEDs). At least 30 seconds of direct UV irradiation process for curing PDLC film on a bottom-emitting OLEDs was successfully achieved without damage on the intrinsic properties of the OLED. We demonstrated that high haze and transmittance can be tuned simultaneously by controlling the UV curing time. By adding PDLC as an external layer without any additional treatment, the light scattering and extraction is increased. Consequently, a PDLC scattering film with 89.8% and 59.9 of total transmittance and haze respectively, achieved about 16% of light intensity enhancement from integrating sphere measurement.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.427-431
• /
• 2006

We have studied electro-optic characteristics of reflective $45^{\circ}$ twisted nematic liquid crystal display which implement the new LC orientation using of in-cell retarder film. For the embodiment of reflective liquid crystal display, essentially the optic compensation films was always needed and attached to the outside of glass substrate. In our study, these optic compensation film were not employed in reflective LC cell. On other hand we have employed the in-cell retarder to substitute the optic compensation film and were able to orient the LC molecules using this in-cell retarder. So we have developed the reflective LC cell that has good optical performances without any additional coating process on the in-cell retarder.

• Journal of Photoscience
• /
• 제12권1호
• /
• pp.41-46
• /
• 2005

We synthesized chiral choleseric liquid crystalline monomer p-phenylene bis-(p-3-acryloxy-2(S)-methylpropoxy)benzoate (1) and achiral nematic liquid crystalline monomer, p-phenylene p-acryloxy-6-hexyloxy-p-octyloxybenzoate (2) for the construction of cholesteric polymer network with a pitch gradient. In this research we attempted to synthesize cholesteric polymer film which have a wide reflection bandwidth in the region of visible wavelength with the synthesized chiral cholesteric monomer 1 and nematic monomer 2 under various photopoly merization conditions. We succeeded to construct cholesteric polymer film network with a pitch gradient covering more than 200 nm bandwidth in the visible wavelength by diffusion controlled photostructuring method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.839-844
• /
• 2002

This letter focuses on the liquid crystal alignment characteristics according to the properties of hydrogenated amorphous carbon(a-C:H) thin film deposited by RPECVD(Remote Plasma Enhanced Chemical Vapor Deposition) method using $C_2H_2$ and He gases. The properties of the deposited thin films were controlled by the ion beam irradiation time and ion beam energy. The results show that not ion beam energy but ion beam irradiation time plays an important role in the properties of a-G:H thin films. As the ion beam irradiation time increases, not only the sp2 concentration in a-G:H thin films but also liquid crystal pretilt angle was varied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1447-1449
• /
• 2009

We report the syntheses bis-(N,N-diethylaminoethyl) perylene-3,4,9,10-tetracarboxylic diimide (PDI) of lyotropic chromonic liquid crystal and it dissolves in photocurable ionic monomer solution. PDI-acrylic acid solution was observed whether liquid crystal phase appeared in each concentration. Thin film polarizer was prepared by simultaneously coating and aligning the solution of PDI-acrylic acid (in the chromonic nematic phase) onto glass substrates using a mechanical shearing force and was cured by irradiation of UV light. Also Photopatterned polarizer is manufactured by same process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.902-903
• /
• 2009

Polymer Dispersed Liquid Crystal (PDLC) films were prepared using the phase separation method with liquid crystal and a newly developed prepolymer. This study investigated the electro-optic characteristics of the PDLC film at various temperatures. It was found that as temperatures increased, the voltage varied, and that the ordinary refractive index of the liquid crystal and the polymer refractive index in the composite had similar dependence at various temperatures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.624-629
• /
• 2001

An experimental study was performed to investigate adiabatic wall temperature and heat transfer coefficient around on a module with longitudinal fin heat sink cooled by forced air flow. In the first method, inlet air flow(1-7m/s) and input power(3-5W) was varied after a heated module were placed on an adiabatic floor($320{\times}550{\times}1mm^{3}$). An adiabatic wall temperature was determinated to use liquid crystal film(LCF). In the second method to determinate heat transfer coefficient, inlet air flow(1-7m/s) and the heat flux of rubber heater($0.031-0.062\;W/cm^{2}$) was varied after an adiabatic module was placed on rubber heater covering up an adiabatic floor. In addition, surface oil-film visualization were performed to characterize the macroscopic flow-field around a module.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.202-205
• /
• 2004

We investigated the electro-optical(EO) performances of the super twisted nematic liquid crystal display(STN-LCD) on the polyimide(PI) surface using polymer film. The NLC pretilt angles generated are about $18^{\circ}$ by the rubbing alignment method on thin plastic substrates. However, the pretilt angle are at about $13^{\circ}$ lower on the glass substrate than on thin plastic substrate. Monodomain alignment of the plastic STN-LCD can be observed. A stable voltage-transmittance(V-T) curve of the plastic STN-LCD was observed on the polyimide(PI) surfaces using polymer film. Also, a faster response time for the plastic STN-LCD on the polyimide(PI) surfaces using polymer film can be achieved.