• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.328-329
• /
• 2005

Inorganic alignment layer (IAL) was deposited on an indium-tin-oxide (ITO) by using reactive sputtering deposition method. After deposited, IAL was irradiated by $Ar^+$ ion beam (IB) for liquid crystal (LC) alignment. IAL treated by various conditions such as IB energy, IB incident angle, and IB irradiation time had excellent alignment property and electro-optical property the same as that of PI. We investigated into the stability of ion beam treated IAL after a lapse of long time. However IAL irradiated IB did not occur degradation of electro-optical property. The results implied that IAL irradiated IB was adopted as LC alignment layer instead of rubbed polyimide.

• 한국광학회지
• /
• 제22권2호
• /
• pp.90-95
• /
• 2011

본 논문에서는 액정 디스플레이의 구현에 있어서 필수적인 필름인 편광판에 ITO를 증착하여 기존 액정 디스플레이에서 두께의 대부분을 차지하는 유리기판을 제거함으로써 경략 박형 액정 셀을 구현하였다. 저온($40^{\circ}C$)에서 편광판에 sputtering으로 buffer layer와 ITO를 증착하여 높은 투과율과 낮은 비저항 및 편평도를 확보하였다. 최종적으로 저온공정이 가능한 ion-beam 배향법을 이용하여 액정을 배향하고 액정 셀을 제작하고 전기광학특성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1110-1114
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about 3$^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about 1.7$^{\circ}$ lower on the glass substrate than on thin plastic substrate. We obtain that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove structure at the low curring temperature (120$^{\circ}C$). However, no grooves are obtained on the glass substrate at the same temperature. It is considered that this alignment may be attributed to roughness of micro-groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that the pretilt angle in the polyimide surface is attributable to the increasing of imidization rato.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.376-376
• /
• 2007

In Liquid Crystal Display (LCD) manufacturing, the organic over coat materials over coat materials for insulation layer of color filter with acryl ate was widely used. Therefore, we approach that the organic overcoat material can use to insulation layer for color filter and liquid crystal (LC) alignment layer in this research. The LC aligning capabilities was successful stuided for the first time. The organic overcoat layer and polymer layer was coated by spin-coating. In order to characterize the LC alignment, electric optic and residual DC and atomic force microscopy (AFM) image was used. The good LCD aligning capabilities treated on the organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. Also the good LCD alignment capabilities treated polymer on surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1800 eV can be achieved. Comparing electro-optical characteristics between the Polyimide (PI) and the overcoat, the resultant transmittance of the overcoat considerably matched that of the PI and the residual DC also exhibited similar features with the PI.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.82-85
• /
• 2013

This paper introduces 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) doped liquid crystal (LC) alignment properties on a rubbed polyimide (PI) layer as a function of the doping concentration of TIPS pentacene. Pretilt angles, photomicrographs, and electro-optical properties of TIPS pentacene doped LCs were comparable to those of pure LCs. However, TIPS pentacene in a LC medium supported twisted nematic-liquid crystal displays (TN-LCDs) to improve electro-optical properties. The threshold voltages observed in the TN cells decreased as the TIPS pentacene concentration increased. In addition, suitable response times were observed in TN cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.776-779
• /
• 2006

The alignment of liquid crystal (LC) is one of the key issues of liquid crystal display (LCD) technologies. In this study, we aligned polyimide (as the LC alignment layer) by ALT plasma beam and to realize the stability and characteristics of this technology. The characteristics such as anchoring energy, pre-tilt angle, voltage holding ratio(VHR) and residual direct current(Rdc) were discussed. Besides, we applied it to the in plane switch (IPS) mode 23" WXGA real panel, the performance parameters and electrical properties were measured and compared with those of rubbing alignment. From the result, we demonstrated a successful LC alignment treatment process in real panel by ALT plasma beam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.451-452
• /
• 2006

We studied the electro-optical characteristic of vertical alignment liquid crystal display(VA-LCD) on the $SiO_x$ thin film deposited $45^{\circ}$ oblique by rf magnetic sputtering system. LC alignment characteristic showed homeotropic alignment, and pretilt angle was about $90^{\circ}$. A uniform liquid crystal alignment effect on the $SiO_x$ thin film was achieved and the electro-optical characteristic of the $SiO_x$ thin film deposited $45^{\circ}$ oblique by rf magnetic sputtering system was excellent.

• 폴리머
• /
• 제36권2호
• /
• pp.145-148
• /
• 2012

광분해형 CBDA-ODA 폴리이미드의 배향막에 대하여 선편광(LPUV) 조사와 이후의 열처리가 배향막, 액정 배향 그리고 LCD 특성에 어떠한 영향을 미치는지에 대하여 조사하였다. 가장 우수한 액정 배향은 배향막의 이방성을 최대로 발생시키는 광조사 에너지보다 상당히(약 5~10배) 작은 양의 광조사에 의하여 유도되었다. 광조사에 이후에 이어지는 배향막에 대한 열처리는 광분해 반응에 의하여 배향막 표면에 형성된 저분자 부산물들을 효과적으로 제거함과 동시에 광조사된 배향막을 안정화시킴으로써 액정의 배향성과 LCD의 전기적 특성을 향상시키는 결과를 가져왔다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.615-620
• /
• 2006

We demonstrate novel soft-lithographic techniques for preparing patterned liquid crystal (LC) orientations at an alignment layer. By controlling patterning conditions such as wetting property and operating temperature depending on polymeric materials, multi-directional or modified LC alignment conditions can be simply achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.511-513
• /
• 2002

Electro-optical characteristics of new multi-domain vertical-alignment (MVA) liquid crystal displays (LCDs) with negative dielectric anisotropy on a homeotropic photopolymer were studied. Good voltage-transmittance (V-T) curves by the new MVA-LCD on the homeotropic photo-polymer were obtained. Also, the stable response time of MVA-LCD on the homeotropic photopolymer can be achieved. The viewing angle of the new MVA-LCD could be improved by the grating groove with UV exposure and development on the photo-polymer.