• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.18-25
• /
• 1984

The transition boiling of a liquid droplet on a heated flat surface was studied utilizing Kotake's model with the effects of viscosity of a thin vapor layer between the droplet and the hot plate taken into account. This problem was analyzed considering the process of the droplet evaporation which resulted in hydrodynamic instability at the liquid-vapor interface. The results of the study are as follows; (1)The effect of the viscosity in the vapor layer at the interface appears as a dimensionless number N, namely .sigma. .delta.$_{0}$ /.rho.nu.$^{2}$ (2)The time required for evaporation at the transitional region increases with the temperature difference ratio .DELTA. T$_{r}$. The rate of increase of the total evaporation time becomes larger as increasing of N$_{m}$(N number at maximum heat flux) increases.s.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.19 no.1
• /
• pp.83-102
• /
• 2015

The present paper analyses the radiation effects of mass transfer on steady nonlinear MHD boundary layer flow of a viscous incompressible fluid over a nonlinear porous stretching surface in a porous medium in presence of heat generation. The liquid metal is assumed to be gray, emitting, and absorbing but non-scattering medium. Governing nonlinear partial differential equations are transformed to nonlinear ordinary differential equations by utilizing suitable similarity transformation. The resulting nonlinear ordinary differential equations are solved numerically using Runge-Kutta fourth order method along with shooting technique. Comparison with previously published work is obtained and good agreement is found. The effects of various governing parameters on the liquid metal fluid dimensionless velocity, dimensionless temperature, dimensionless concentration, skin-friction coefficient, Nusselt number and Sherwood number are discussed with the aid of graphs.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.689-694
• /
• 2000

The traditional concept after Terzaghi was that consolidation was the dissipation process of pore water pressure compatible to external loading which was generated immediately after the loading. However, a theory of one-dimensional consolidation based on elasto-viscous liquid model proposed by Yoshikuni(1994) explained that the process of primary and secondary consolidation was considered to be not a simple process of dissipation of pore water pressure but a simultaneous process of dissipation and generation by external loading. This study attempts to demonstrate general consolidation behaviour of clayey soils including effects of consolidation history, load increment and thickness of cohesive layer by one-dimensional Finite Difference Method(F.D.M) analysis from the viewpoint of elasto-viscous consolidation theory.

• Journal of Information Display
• /
• v.7 no.2
• /
• pp.12-15
• /
• 2006

We propose a patterning method of liquid crystal (LC) alignment layer for producing multi-domain LC structures. By controlling thermal conditions during micro-contact printing procedures and facilitating wetting properties of patterning materials, patterned LC orientation can be easily obtained on a bare ITO surface or other polymer films. The newly proposed patterning method is expected to be a very useful tool for fabricating multi-domain LC structures to enhance or design electro-optic properties of LC-based devices.

• Journal of Information Display
• /
• v.10 no.1
• /
• pp.19-23
• /
• 2009

In this paper, we review the proposed liquid crystal display (LCD) with a tunable viewing angle consisting of a conventional liquid crystal display (LCD) panel and a thermally variable retardation layer (TVRL) characterized by uniformly aligned LC film with transparent indium-tin-oxide electrodes for Joule heating. In the TVRL, nematic phase is transitioned into isotropic by Joule heating. The numerical calculation showed that the intrinsic wide viewing angle was achieved at the isotropic phase of the TVRL by Joule heating, whereas the narrow viewing angle was obtained at the nematic phase of the TVRL. The simulated and experimental results of the proposed LCD show continuous and symmetrical viewing angle characteristics by tuning the retardation of TVRL using Joule heating. The structure of the viewing angle control proposed here is adoptable to all LCD modes with wide viewing angle characteristics.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.2
• /
• pp.1-5
• /
• 2002

Alignment effects for nematic liquid crystal (NLC) and electro-optical (EO) characteristics of the ion beam (IB) aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the diamond-like carbon (DLC) thin film surface were studied. A high pretilt angle of 3.5$^{\circ}$ in NLC by ion beam exposure on the DLC thin film layer can be measured. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the DLC thin film surface for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min can be achieved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.1
• /
• pp.81-86
• /
• 2006

We have studied electrode-optic characteristics of in-plane switching (IPS) of liquid crystal director driven by an oblique electric field. Because the conventional IPS mode does not have an electrode on top substrate, it shows not only slow response time due to weak electric field but also slow discharging problem when electrostatic field is generated after fabricating the cell. To solve these problems, we have formed additional electrode including dielectric layer in the inner part of the cell on top substrate and studied electrode-optic characteristics of the new device.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.105-109
• /
• 2002

The short-term AC breakdown strength of laminated polypropylene insulating Paper (PPLP) has been studied for cold dielectric of high temperature superconductivity power cables. The design and operating conditions of the electrode system for studying of short-term breakdown strength of one-layer and multi-layer PPLP samples are discussed in liquid nitrogen(LN2) state. The influence of various operating factors (geometry and dimension of electrodes, speed of tested voltage, thickness of test sample) on the value of short-term AC breakdown strength at cryogenic temperature has been established.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2010

This paper proposes a transflective liquid crystal display (LCD) in a whole-pixel switchable configuration with a high aperture ratio using an electrophoretic particle layer (EPL). The switchable transflective LCD consisted of the liquid crystal layer as a display unit, and the EPL as a switchable mirror. The switching of the EPL between the mirror for the reflective mode and the transparency for the transmissive mode was performed by controlling electrophoretic nanoparticles with an applied voltage in a three-electrode structure. The single pixel was used as the whole transmissive or reflective mode that corresponded to the switchable EPL mirror. Thus, a transflective LCD with a high aperture ratio was obtained.

• Journal of Information Display
• /
• v.8 no.2
• /
• pp.5-9
• /
• 2007

We demonstrate novel soft-lithographic techniques for preparing patterned liquid crystal (LC) orientations at an alignment layer. By controlling patterning conditions such as wetting property and operating temperature depending on polymeric materials, multi-directional or modified LC alignment conditions can be simply achieved.