• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.1
• /
• pp.64-71
• /
• 2018

To improve the soil of reclaimed land, we added organic materials at a level of 3,000 kg/10 a. As a result, the electrical conductivity (EC) value of reclaimed soil decreased by 58%, the organic material content increased from 6.7 to 16.0 g/kg, the porosity increased from 1.57 to 1.31%, the soil hardness decreased from 20.2 to 17.9 mm and the plow layer was deepened from 19.8 to 26.8 cm. After these physiochemical improvements to the reclaimed soil, the growth phase of crops was improved compared to that of non-treatment crops. The height of kenaf (Hibiscus cannabinus L.) cultivated in the reclaimed land containing organic materials was increased by 18.8%. Especially, the improvement effects of pellet type manure compost and rice straw on kenaf were more preferable than those of other organic materials. When the kenaf was cultivated in the reclaimed land containing organic materials, the yield increased. The average yield of the treatment crops was 9,218 kg/10 a, 2.1 times higher than that of non-treatment crops. The most effective treatments to increase the yields were pellet type manure compost (10,848 kg/10 a, 148% increase), rice straw (120% increase) and chopped kenaf (95% increase). To increase the physicochemical enhancements to the reclaimed land soil and most improve yields, the most effective type of organic materials was the pellet. The organic material types that maintained a better growth phase and most increased the yield were the liquid and pellet types. When we used pellet type organic material, the plant height of kenaf was increased by 41% in comparison with that of the non-treatment crops and yield was increased by more than 122%. Additionally liquid type organic material improved the yield (by 127%).

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.579-585
• /
• 2014

This study was conducted to investigate liquid pig manure (LPM) application rates on the growth characteristics, yield, and feed value of whole crop barley in Yeongsangang and Saemangeum reclaimed tidal land. Electronic conductivity (EC), organic matter (OM), and available phosphate (Av. $P_2O_5$) increased in chemical properties of Yeongsangang and Saemangeum soil as raising LPM application level. As increasing LPM application level, exchangeable $Na^+$ significantly increased in Yeongsangang, while exchangeable $K^+$ significantly increased in Saemangeum. Plant height was not significantly different from LPM 100% to LPM 200% in Yeongsangang and in Saemangeum. Dry matter yield of whole crop barley increased steadily, but crop yield of LPM 200% in Yeongsangang ($10.5ton\;ha^{-1}$) was as much as that of LPM 150% ($10.0ton\;ha^{-1}$). Yield of LPM 200% ($11.2ton\;ha^{-1}$) in Saemangeum was similar to that of LPM 150% ($10.5ton\;ha^{-1}$). Crude protein (CP) increased depending on LPM application level, but total digestible nutrients (TDN) increased regardless of LPM application level. LPM 200% was the highest in TDN yield (Yeongsangang: $7.4ton\;ha^{-1}$, Saemangeum: $6.9ton\;ha^{-1}$), but there was no statistical difference between LPM 150% (Yeongsangang: $6.9ton\;ha^{-1}$, Saemangeum: $6.6ton\;ha^{-1}$) and LPM 200%. From the results described above, optimum rate of LPM for cultivating whole crop barley is considered 100% in Yeongsangang reclaimed tidal land and 150% in Saemangeum reclaimed tidal land, showing that the effect of LPM application is better in Segmentation than that in Yeongsangang for yield of whole crop barley.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.53-68
• /
• 1981

Most clays under sustained load exhibit time-dependent deformation because of creep movement of soil particles and many investigators have attempted to relate their findings to the creep behavior of natural ground and to the long-term stability of slopes. Since the creep behavior of clays may assume a variety of forms depending on such factors as soil plasticity, activity and water content, it is difficult and complicated to analyse the creep behavior of clays. Rheological models composed of linear springs in combination with linear or nonlinear dashpots and sliders, are generally used for the mathematical description of the time-dependent behavior of soils. Most rheological models, however, have been proposed to simulate the behavior of secondary compression for saturated clays and few definitive data exist that can evaluate the behavior of non-saturated clays under the action of sustained stress. The clays change gradually from a solid state through plastic state to a liquid state with increasing water content, therefore, the rheological models also change. On the other hand, creep is time-dependent, and also the effect of thixotropy is time-function. Consequently, there may be certain correlations between creep behavior and the effects of thixotropy in compacted clays. In addition, the states of clay depend on water content and hence the height of the specimen under drained conditions. Futhermore, based on present and past studies, because immediate elastic deformation occurs instantly after the pressure increment without time-delayed behavior, the factor representing immediate elastic deformations in the rheological model is necessary. The investigation described in this paper, based on rheological model, is designed to identify the immediate elastic deformations and the effects of thixotropy and height of clay specimens with varing water content and stress level on creep deformations. For these purposes, the uniaxial drain-type creep tests were performed. Test results and data for three compacted clays have shown that a linear top spring is needed to account for immediate elastic deformations in the rheological model, and at lower water content below the visco-plastic limit, the effects of thixotropy and height of clay specimens can be represented by the proposed rheological model not considering the effects. Therefore, the rheological model does not necessitate the other factors representing these effects. On the other hand, at water content higher than the visco-plastic limit, although the state behavior of clays is visco-plastic or viscous flow at the beginning of the test, the state behavior, in the case of the lower height sample, does not represent the same behavior during the process of the test, because of rapid drainage. In these cases, the rheological model does not coincide with the model in the case of the higher specimens.

• Journal of Embryo Transfer
• /
• v.24 no.3
• /
• pp.207-212
• /
• 2009

The aim of present experiment was to examine commercial synthetic extender(AndroMed) for semen cryopreservation of Korean Black Bull. Semen was collected from a Korean Black Bull using an artificial vagina and transported to the laboratory. The semen was diluted 1:1 by AndroMed. The pellect was diluted to final sperm concentration of $5{\times}10^5/ml$ by doubling in every 10 minutes at $4^{\circ}C$ cold chamber. The semen was equilibrated for 1 hr at cold chamber and packed to 0.5 ml straw. The semen straws were located above 5 cm of liquid nitrogen for 5 minutes, above 5 cm for 10 minutes and above 10 cm for 10 min. And then the frozen straw was plunged to $LN_2$. The presented straws were examined the viability and motility after thawed at $37^{\circ}C$ water bath. Hanwoo semen was used as KPN (Korea Proven Bull Number) in this experiment. The survival rates was significantly higher in fresh semen than frozen semen ($80{\pm}14%\;and\;43{\pm}11%$). However, the motility rates was similar (80.7% and 66.4%). The survival and motility rates were higher in 5cm, 10 min treatment group than the other two groups in straw-located height and duration above $LN_2$ ($50{\pm}14%$ and 70.7% vs, 33.18% and $65{\pm}7%$ vs, 30.14% and 65.7%, respectively). The development rates to cleavage was higher in Black Cow than Hanwoo semen (62.2%, 64.4%), However, The development rates to blastocyst was higher in Hanwoo than Black cow semen (25.9%, 23.0%). In conclusion. The present results that acceptable fertilization and cryopreservation could be obtained by in vitro fertilization with frozen-thawed semen using a synthetic semen extender (AndroMed).

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.585-592
• /
• 2007

This research was carried out in order to establish the production technique for Poong-san dog’s frozen semen, by examining the semen characteristic and the volume of glycerol added to the dilution solution, thawing temperature and sperm motility and viability as well as the motility using CASA according to time variation. Average semen volume was 5.9ml, sperm concentration 116.3×106 sperm/ml, total sperm number 789.3×106 sperm, motility 88.7±1.7% and viability 87.6±7.8%. When it was cryopreservation and thawed at different glycerol concentrated extender, it showed 52.7% motility and 57.7±10.3% viability at 7% glycerol, compared to other treatments. For semen cryogeny, at conditions of 5, 7cm and a height of 10cm for pre-cryogeny and maintaining the semen at 7cm from the surface of liquid nitrogen resulted in profitable motility and viability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.278-278
• /
• 2009

A photovoltaic device consisting of arrays of radial p-n junction wires enables a decoupling of the requirements for light absorption and carrier extraction into orthogonal spatial directions. Each individual p-n junction wire in the cell is long in the direction of incident light, allowing for effective light absorption, but thin in orthogonal direction, allowing for effective carrier collection. To fabricate radial p-n junction solar cells, p or n-type vertical Si wire cores need to be produced. The majority of Si wires are produced by the vapor-liquid-solid (VLS) method. But contamination of the Si wires by metallic impurities such as Au, which is used for metal catalyst in the VLS technique, results in reduction of conversion efficiency of solar cells. To overcome impurity issue, top-down methods like noble metal catalytic etching is an excellent candidate. We used noble metal catalytic etching methods to make Si wire arrays. The used noble metal is two; Au and Pt. The method is noble metal deposition on photolithographycally defined Si surface by sputtering and then etching in various BOE and $H_2O_2$ solutions. The Si substrates were p-type ($10{\sim}20ohm{\cdot}cm$). The areas that noble metal was not deposited due to photo resist covering were not etched in noble metal catalytic etching. The Si wires of several tens of ${\mu}m$ in height were formed in uncovered areas by photo resist. The side surface of Si wires was very rough. When the distance of Si wires is longer than diameter of that Si nanowires are formed between Si wires. Theses Si nanowires can be removed by immersing the specimen in KOH solution. The optimum noble metal thickness exists for Si wires fabrication. The thicker or the thinner noble metal than the optimum thickness could not show well defined Si wire arrays. The solution composition observed in the highest etching rate was BOE(16.3ml)/$H_2O_2$(0.44M) in Au assisted chemical etching method. The morphology difference was compared between Au and Pt metal assisted chemical etching. The efficiencies of radial p-n junction solar Cells made of the Si wire arrays were also measured.

• Journal of Environmental Health Sciences
• /
• v.46 no.4
• /
• pp.423-432
• /
• 2020

Objectives: In this study, we analyzed the current state of delivery containers and packages and established handling guidelines to safely transport delivery containers and packages for use in research, testing, and examination reagents. Methods: Handling guidelines were revised in such categories as maintenance of the handling facilities, storage, loading and unloading, containers and packages, transportation, etc. In addition, we analyzed the current state of domestic sales for hazardous chemicals used for research, testing, and examination reagents, and investigated the handling guidelines related to delivery transportation in the USA, EU, and Japan by chemical property. Results: There are 6,160 companies selling hazardous chemicals. Among them, the 476 companies selling reagents for use in research, testing, and examination were investigated. Total amounts handled reached 425,000 tons, contributing to 0.2% of the total. For delivery transportation, internal containers and packaging was specified for chemical properties as follows: within 1 L for flammable gas, within 5 L for flammable liquid, and within 18 L for others. In addition, the maximum size of the outer package was set within 130 cm for total length, width, and height, and no dimension of the packaging could exceed 60 cm. Sixty-four hazardous chemicals with explosiveness or acute inhalation toxicity were prohibited for delivery transportation. Conclusion: Specified handling guidelines for inner and outer containers as well as packaging were regulated for delivery transportation of hazardous chemicals used for reagents. In addition, 64 hazardous chemicals were prohibited for delivery transportation. These are designed to prevent transportation accidents involving hazardous chemicals for reagents and thus protect the safety and health of transporters who handle hazardous chemicals.

• Journal of the Korean Geographical Society
• /
• v.36 no.3
• /
• pp.233-246
• /
• 2001

Topography and soil characteristics of earth hummocks are examined in the summit crater of Mt. Halla in order to evaluate their morphoclimatic significance as an indicator of a periglacial environment. The hummocks are generally oval in outline, and they have a diameter of 42 to 200 cm and a height of 9 to 27 cm Seventeen hummocks are distributed In a 5$\times$5 m quadrat at an interval of 20 to 40 cm Excavation reveals the cryoturbated soil profiles which consist of upper dark brown layer and lower brown layer. The dark brown layer has 61.8% total clay and silt content, implying Its high frost susceptibility Earth hummocks have the dry density of 0.761 to 1.009 g/㎤ the void ratio of 1420 to 2.008, and the moisture content of 24.2 to 68.8% by weight, respectively. The hummocky soils become compacted and desiccated downward. Earth hummocks are frozen as a hard solid mass during winter and early spring, and freezing fronts reach about 45 cm below their apices. The layer with high lute content appears in the upper horizon of dark brown soil. but Ice lenses are not so much segregated The moisture content of hummocky soils generally increases up to 73.9 to 118.80% for dark brown layer and 49.9 to 82.8% for brown layer during thins period Because the cohesive soil of earth hummocks indicates 72.8% of the moisture content as a liquid limit, the dark brown layer is highly fluid and consequently subject to cryoturbation processes.

• Nutrition Research and Practice
• /
• v.8 no.3
• /
• pp.336-341
• /
• 2014

BACKGROUND/OBJECTIVE: It is expected that dairy products such as cheeses, which are the main source of cholesterol and saturated fat, may lead to the development or increase the risk of cardiovascular and metabolic diseases; however, the results of different studies are inconsistent. This study was conducted to assess the association between cheese consumption and cardiovascular risk factors in an Iranian adult population. SUBJECTS/METHODS: Information from the Isfahan Healthy Heart Program (IHHP) was used for this cross-sectional study with a total of 1,752 participants (782 men and 970 women). Weight, height, waist and hip circumference measurement, as well as fasting blood samples were gathered and biochemical assessments were done. To evaluate the dietary intakes of participants a validated food frequency questionnaire, consists of 49 items, was completed by expert technicians. Consumption of cheese was classified as less than 7 times per week and 7-14 times per week. RESULTS: Higher consumption of cheese was associated with higher C-Reactive Protein (CRP), apolipoprotein A and high density lipoprotein cholesterol (HDL-C) level but not with fasting blood sugar (FBS), total cholesterol, low density lipoprotein cholesterol (LDL-C), triglyceride (TG) and apolipoprotein B. Higher consumption of cheese was positively associated with consumption of liquid and solid oil, grain, pulses, fruit, vegetable, meat and dairy, and negatively associated with Global Dietary Index. After control for other potential confounders the association between cheese intake and metabolic syndrome (OR: 0.81; 96%CI: 0.71-0.94), low HDL-C level (OR: 0.87; 96%CI: 0.79-0.96) and dyslipidemia (OR: 0.88; 96%CI: 0.79-0.98) became negatively significant. CONCLUSION: This study found an inverse association between the frequency of cheese intake and cardiovascular risk factors; however, further prospective studies are required to confirm the present results and to illustrate its mechanisms.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.68-74
• /
• 2010

In this study, fluidized-bed pyrolysis has been conducted in order to recover the bitumen contained in the oil sand. Canada Alberta oil sand contains 11.9% of bitumen and the bitumen-derived heavy oil produced in fluidizedbed tends to be upgraded relative to the bitumen. The continuous operation has been performed using $N_2$ as a fluidization gas at 1 atm and $500^{\circ}C$ in a reactor of 170 cm height. The results showed 87.76% of bitumen conversion, where liquid products are 74.45% and gas products are 13.31%. $H_2$, $O_2$, CO, $CO_2$, $CH_4$, and NO and $C_1{\sim}C_4$ hydrocarbons in the gas products were analyzed by on-line gas analyzer and gas chromatography, respectively. The pyrolysis oil was analyzed by using proximate analysis, heavy metal analysis, SIMDIS, asphaltenes, and heating value. By SIMDIS analysis, naphtha was 11.50%, middle distillation was 44.83% and heavy oil was 43.66%. It was obvious that the pyrolysis oil was upgraded compared with bitumens.