• 제목/요약/키워드: Liquid Fossil Fuel

검색결과 40건 처리시간 0.024초

삼중수소 저장용기 이종용접부의 수소취화 거동 평가 (II) (Evaluations of Hydrogen Embrittlement Behaviours on Dissimilar Welding Part of SDS Bottles (II))

  • 조경원;최재하;장민혁;이영상;홍태환
    • 한국수소및신에너지학회논문집
    • /
    • 제26권2호
    • /
    • pp.120-126
    • /
    • 2015
  • Recently, the ever-increasing use of fossil fuels for rapid industrial development and population significantly caused an environment pollution and global warming such as climate change. So research and development of sustainable and eco-friendly energy have been performed. Especially the interest in nuclear fusion fuel was significantly increased from the developed countries. The system of fusion energy production was tritium separation, storage and delivery, and purification. Republic of Korea is in charge of Storage and Delivery System (SDS) in the International Thermonuclear Experimental Reactor (ITER). Welding part of the SDS bottles for storing the tritium is known to be susceptible to hydrogen embrittlement. In this study, conducted a study for the relaxation of the stability and hydrogen embrittlement of the weld area. The hydrogen heat treatment was processed through the Pressure-Composition-Temperature (PCT) device according to the time variation. Also mechanical properties such as impact test and hardness test according to using the alkaline cleaning liquid for hydrogen embrittlement relief and the fracture was observed by scanning electron microscopy (SEM) after the mechanical properties evaluation.

Quantitative Determination of Organic Yield by Continuous Percolation Processes of Bio-wastes at K Composting Plant

  • Seo, Jeoung-Yoon;Jager, Johannes
    • Environmental Engineering Research
    • /
    • 제19권2호
    • /
    • pp.123-130
    • /
    • 2014
  • Percolation is the important process of extracting the soluble constituents of a fine mesh, porous substance by passage of a liquid through it. In this study, bio-wastes were percolated under various conditions through continuous percolation processes, and the energy potential of percolate was evaluated. The representative bio-wastes from the K composting plant in Darmstadt, Germany were used as the sample for percolation. The central objective of this study was to determine the optimal amount of process water and the optimum duration of percolation through the bio-wastes. For economic reasons, the retention time of the percolation medium should be as long as necessary and as short as possible. For the percolation of the bio-wastes, the optimal percolation time was 2 hr and maximum percolation time was 4 hr. After 2 hr, more than two-thirds of the organic substances from the input material were percolated. In the first percolation process, the highest yields of organic substance were achieved. The best percolation of the bio-wastes was achieved when the process water of 2 L for the first percolation procedure and then the process water of 1.5 L for each further percolation procedure for a total 8 L for all five procedures were used on 1,000 g fresh bio-waste. The gas formation potentials of 0.83 and $0.96Nm^3/ton$ fresh matter (FM) were obtained based on the percolate from 1 hr percolation of 1,000 g bio-waste with the process water of 2 L according to the measurement of the gas formation in 21 days (GB21). This method can potentially contribute to reducing fossil fuel consumption and thus combating climate change.

전기자동차 배터리팩 열관리시스템에서 상변화물질 적용에 관한 고찰 (A Study on the Application of Phase Change Material for Electric Vehicle Battery Thermal Management System using Dymola)

  • 최철영;최웅철
    • 전기학회논문지
    • /
    • 제66권12호
    • /
    • pp.1889-1894
    • /
    • 2017
  • Global automobile manufacturers are developing electric vehicles (EVs) to eliminate the pollutant emissions from internal combustion vehicles and to minimize fossil fuel consumptions for the future generations. However, EVs have a disadvantage of shorter traveling distance than that of conventional vehicles. To answer this shortfall, more batteries are installed in the EV to satisfy the consumer expectation for the driving range. However, as the energy capacity of the battery mounted in the EV increases, the amount of heat generated by each cell also increases. Naturally, a better battery thermal management system (BTMS) is required to control the temperature of the cells efficiently because the appropriate thermal environment of the cells greatly affects the power output from the battery pack. Typically, the BTMS is divided into an active and a passive system depending on the energy usage of the thermal management system. Heat exchange materials usually include gas and liquid, semiconductor devices and phase change material (PCM). In this study, an application of PCM for a BTMS was investigated to maintain an optimal battery operating temperature range by utilizing characteristics of a PCM, which can accumulate large amounts of latent heat. The system was modeled using Dymola from Dassault Systems, a multi-physics simulation tool. In order to compare the relative performance, the BTMS with the PCM and without the PCM were modeled and the same battery charge/discharge scenarios were simulated. Number of analysis were conducted to compare the battery cooling performance between the model with the aluminum case and PCM and the model with the aluminum case only.

급수가 다른 아민 혼합에 따른 이산화탄소 흡수 특성 (Carbon dioxide absorption characteristics according to amine mixtures with different order)

  • 최수현;유정균;박기태;백일현;박소진
    • 한국산학기술학회논문지
    • /
    • 제14권9호
    • /
    • pp.4635-4642
    • /
    • 2013
  • 화력발전소로부터 배출되는 이산화탄소를 분리하기 위하여 급수가 다른 아민을 혼합한 개선 흡수제를 개발하고자 하였다. 급수가 다른 1, 2, 3급 아민을 혼합한 후 이산화탄소 부분압에 따른 이산화탄소 흡수능을 조사하였다. 동일한 압력에서 이산화탄소 흡수능은 3DMA1P 30wt%>3DMA1P 27wt%+MEA 3wt%>3DMA1P 27wt%+DEA 3wt% 순으로 나타내었으며, 이는 3급인 3DMA1P에 2급인 DEA보다는 1급인 MEA를 혼합하는 것이 우수한 흡수능을 보이고 있다. 따라서 흡수능이 우수한 3급 아민에 흡수속도를 높이기 위하여 1급 아민을 혼합하는 것이 유리함을 알 수 있다. 최종적으로 준경험 기액 평형모델을 이용하여 실험 결과를 계산한 결과 실험치와 잘 일치하였다.

건축적용을 위한 다공성 물질을 이용한 상안정 PCM 제조 (Preparation of Shape Stabilized PCM Using Porous Materials for Application to Buildings)

  • 정수광;유슬기;장슬애;박진성;김태현;이정훈;김수민
    • 설비공학논문집
    • /
    • 제25권8호
    • /
    • pp.432-437
    • /
    • 2013
  • The increase of greenhouse gas emission and decrease of fossil fuel are being caused by the indiscreet consumption of energy by people. Recently, green policy has been globally implemented to reduce energy consumption. This paper studied the research to reduce the energy consumption in buildings, by using the heat storage properties of PCM. PCM has to prevent leakage from the liquid state. Therefore, we prepared form stable PCM, by using the vacuum impregnation method. Three kinds of organic PCMs were impregnated into the structure of porous material. The characteristics of the composites were determined by using SEM, DSC, FTIR and TGA. SEM morphology showed the micro structure of silica fume/PCM. Also, thermal properties were examined by DSC and TGA analyses; and the chemical bonding of the composite was determined by FTIR analysis.

LNG 저장탱크 바닥판 단열 시스템 개선 (Improvement of Insulation System for LNG Storage Tank Base Slab)

  • 이용진;노병철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제14권4호
    • /
    • pp.141-147
    • /
    • 2010
  • LNG 천연가스로서 저장과 운반이 용이한 액체로 변형이 가능하며, 청정연료로 각광받게 되어, 석유에너지의 의존도를 낮추고 에너지사용의 다변화를 위해 1986년 인도네시아로부터 처음 도입된 이래로 산업의 성장과 더불어 그 수요량이 지속적으로 증가하고 있다. LNG는 천연가스의 부피를 영하 약 $-162^{\circ}C(-260^{\circ}F)$까지 냉각시켜 1/600까지 줄일 수 있으므로, 저장 및 운반에 있어서 매우 효율적이다. 현대의 LNG 저장탱크는 철근 콘크리트 이중벽과 내부 니켈방호벽 및 벽사이의 효율이 높은 단열재로 구성된 완전 방호식이 적용되고 있다. 단열재는 극저온의 온도가 LNG 탱크 외벽으로 전달되는 것을 차단하며, 바닥슬래브, 외벽 및 상부에 설치된다. LNG 저장탱크의 단열재의 배치에 따라 콘크리트 외조에 작용하는 온도분포에 차이가 나므로, 본 연구에서는 기 건설된 완전 방호식 LNG 저장탱크 바닥판 단열재의 배치에 대해 검토하고, 이를 바탕으로 단열시스템 개선 방안을 제안하고자 한다.

바이오디젤 생산을 위한 미세조류 옥외배양 시스템의 영양원에 따른 미세조류 성장 특성 비교 (The Effect of Microalgal Growth on Nutrient Sources Using Microalgal Small Scale Raceway Pond (SSRP) for Biodiesel Production)

  • 김동호;김병혁;최종은;강시온;김희식
    • 미생물학회지
    • /
    • 제50권4호
    • /
    • pp.313-318
    • /
    • 2014
  • 최근 지구온난화문제와 화석연료 자원의 부족문제로 인해 지속적이고 친환경적인 미세조류 기반 바이오디젤이 주목받고 있다. 본 연구에서는 돈분 액체비료와 농업용 복합비료가 바이오 디젤 생산을 위한 미세조류 영양원으로 활용될 가능성을 확인해 보았다. 혼합 미세조류 CSS (Chlorella spp., Scenedesmus spp., Stigeoclonium spp.) 배양을 위한 영양원은 돈분 액체비료, 돈분 액체비료와 농업용 복합비료의 혼합, 농업용 복합비료이며, 28일간 Small Scale Raceway Pond (SSRP)에서 옥외배양하였다. 그 결과 혼합 실험구의 바이오매스와 지질 생산성은 각각 0.8g/L, 5.8 mg/L/day로 가장 우수한 바이오매스량과 지질 생산성을 보여주었다. 이 연구를 통해 농업용 복합비료와 돈분 액체비료의 혼합액이 미세조류에 안정적인 영양 공급을 하는 영양원으로 활용될 가능성을 확인하였다. 또한, 미세조류 배양단가와 바이오디젤 생산단가를 낮출 가능성도 탐구하였다.

잡초 및 농림부산물을 이용한 Biorefinery 기술개발 (Biorefinery Based on Weeds and Agricultural Residues)

  • 황인택;황진수;임희경;박노중
    • 한국잡초학회지
    • /
    • 제30권4호
    • /
    • pp.340-360
    • /
    • 2010
  • 이제 바야흐로 21세기 탈석유 시대에 대비하기 위해서는 범국가적 차원의 새로운 산업전략이 필요하게 되었다. "바이오리파이너리"란 원유로부터 각종 화학제품을 생산하는 기존의 기술과 달리 석유대신 나무나 볏짚 등과 같은 식물을 원료로 해서 바이오화학제품이나 바이오연료 등을 생산하는 기술을 총칭한다. 바이오리파이너리를 통한 바이오매스 기반의 화학산업은 석유로부터 생성되는 많은 역기능적인 문제점들을 해결할 수 있다. 바이오리파이너리 기술을 이용해서 생산할 수 있는 제품을 특성별로 분류하면, 바이오 연료, 대체원료, 특수 기능물질, 바이오폴리머 등이 있으며, 이러한 공정기술 개발이 미래지속 성장 화학기술의 중심기술이 될 것이다. 바이오 연료에는 에탄올, 디젤, 수소 등이 있고, 대체원료(chemical feedstock)로서는 글리세롤, 젖산, 아세톤, 부탄올, 프로피온산, 부틸산, 부탄디올, 프로판디올, 구연산, 숙신산, 각종 아미노산 등이 해당된다. 특수기능물질 중에는 항생제, 다당류, 미생물농약, 생리활성물질 등과 각종 생촉매 전환반응 생산제품, 바이오 식품소재 등이 있고, 바이오 폴리머는 미생물 대사산물 유기산을 원료로 하는 고분자와 미생물이 직접 생산하는 바이오 폴리머 등이 있다. 이러한 공정기술 개발이 미래 지속 성장 화학기술의 중심기술이 될 것이며, 공정기술 중에서 가장 핵심이 되는 것은 충분한 양의 바이오매스 확보 및 생화학적/열화학적 전환기술이다. 바이오매스 확보를 위하여 환경적응성이 큰 잡초의 이용이 기대된다. 바이오리파이너리는 농업으로 시작되며, 농업과 화학산업의 다리역할을 하는 기술이 바로 바이오리파이너리인 것이다.

온실보온(溫室保溫)을 위한 상변화(相變化) 물질(物質)의 축열특성연구(蓄熱特性硏究) (Study on the Thermal Storage Characteristics of Phase Change Materials for Greenhouse Heating)

  • 송현갑;유영선;김영복
    • 태양에너지
    • /
    • 제13권2_3호
    • /
    • pp.65-78
    • /
    • 1993
  • 자연적인 기후조건하에서 농산물을 생산하는 재래식 농업으로부터 계절을 초월하는 시설 농업이 파생 발전함에 따라 태양에너지이외의 화석에너지 사용이 급증하고 있으며, 이로 인한 농산물 가격상승과 품질저 하는 물론이고, 농촌환경을 오염시키고 있다. 이와 같은 문제를 근원적으로 해결하기 위해서는 태양에너지 농업이용을 극대화 하여야 하며, 이를 실현하기 위해서는 동적이며, 순간적 공급의 특성을 갖는 태양에너지를 정적이며, 조절이용이 가능한 에너지로 전환하여야 한다. 이런 필요성에 부응하여 본 연구에서는 태양에너지를 저장할 수 있는 상변화 잠열재를 선택하였으며, 축열특성을 분석하므로서 다음과 같은 결과를 얻을 수 있었다. 유기 잠열재, $C_{28}H_{58}$은 안정된 물성을 가지고 있기 때문에 400 사이클의 상변화 후에도 열특성 변화가 없었으나, 무기 잠열재($CH_3COONa{\cdot}3H_2O,\;Na_2SO_4{\cdot}10H_2O$)는 불안정한 물성을 가지고 있기 때문에 조핵제와 농화제를 사용하여 $400{\sim}600$ 사이클의 상변화 후에 나타나는 열특성 변화를 최소화 하였다. 잠열량이 최대가 되는 결정핵의 임계반경을 수식으로 정리하므로서 잠열량 감소현상을 억제할 수 있는 방법을 찾는데 도움을 줄 수 있었다. 유기 잠열재, $C_{28}H_{58}$의 상변화 온도는 $62^{\circ}C$였으며, 잠열량은 $50{\sim}52$ kcal/kg이었고, 고상비열, $C_{ps}$$0.572{\sim}0.750kcal/kg^{\circ}C$였으며, 액상비열, $C_{pL}$$0.540{\sim}0.690kcal/kg^{\circ}C$였다. 무기 잠열재, $CH_3COONa{\cdot}3H_2O$의 상변화 온도는 $61{\sim}62^{\circ}C$였으며, 잠열량은 $64.9{\sim}65.8$ kcal/kg이었고, 고상 비열, $C_{ps}$$0.510{\sim}0.520kcal/kg^{\circ}C$였으며, 액상비열, $C_{pL}$$0.83kcal/kg^{\circ}C$였다. 무기 잠열재, $Na_2SO_4{\cdot}10H_2O$는 물성안정제를 가한 상태의 시약수준에서는 상변화 온도가 $29.72^{\circ}C$였고, 잠열량은 53.0 kcal/kg이었으며, 고상비열, Cps는 $0.742kcal/kg^{\circ}C$이었고, 액상비열, $C_{pL}$$1.002kcal/kg^{\circ}C$였다. 공업용 수준에서는 상변화 온도가 시약수준의 경우보다 약간 높은 $30{\sim}30.9^{\circ}C$였으며, 비열은 고상에서 $0.50{\sim}0.7kcal/kg^{\circ}C$였고, 액상에서 $0.78{\sim}0.89kcal/kg^{\circ}C$였다. SSD($Na_2SO_4{\cdot}10H_2O$)에 urea를 첨가함으로서 상변화 온도와 잠열량이 변하였으며, urea 함량을 $0{\sim}7.5wt%$로 변화시킴에 따라 상변화 온도는 $29.72^{\circ}C$에서 $25.18^{\circ}C$로 낮아졌으며, 잠열량은 53.0 kcal/kg에서 38.5 kcal/kg으로 감소하였다. Greenhouse 보온용으로 urea를 21.85% 첨가하고, 상변화를 $0{\sim}600$ 사이클까지 반복한 경우 상변화 온도는 $16.7^{\circ}C$에서 $16.0^{\circ}C$로 낮아졌고, S.V를 첨가하지 않은 경우 잠열량은 46.22 kcal/kg에서 36.30 kcal/kg으로 감소하였으나, 비열은 큰 변화가 없었다. 상변화 사이클의 증가에 의한 열특성의 감쇠현상을 줄이기 위하여 S.V를 $0{\sim}1.5wt%$ 첨가한 결과 S.V 0.5wt% 이하에서는 약간의 효과가 있었으나, 그 이상에서는 효과적인 증후가 없었다.

  • PDF

이산화탄소 흡수 공정에서 흡수액 최적 재생 조건에 대한 이론적 고찰 (Theoretical Study on Optimal Conditions for Absorbent Regeneration in CO2 Absorption Process)

  • 박성열
    • Korean Chemical Engineering Research
    • /
    • 제50권6호
    • /
    • pp.1002-1007
    • /
    • 2012
  • 에너지 수요의 지속적인 증가는 화석 연료의 사용을 통해 상당한 부분이 충족되고 있으며 이로 인한 이산화탄소의 배출은 지구온난화의 주요 원인으로 인식되고 있다. 대규모 발생원으로부터 이산화탄소를 포집하기 위한 방안의 하나로 흡수 공정이 적용되고 있으며, 흡수제의 흡수 및 재생으로 구성된 연속 순환 공정 특성상 흡수제의 특성뿐만 아니라 흡수 재생 운전 조건은 전체 공정 성능에 매우 중요한 부분을 차지한다. 이러한 최적의 운전 조건은 실제로 운전되고 있는 공정에서 찾아내는 것이 최선이라 할 수 있으나, 이를 위해 실제 상용 공정의 운전 변수를 임의로 변경하는 것은 공정 안정성 측면에서 현실적으로 불가능한 경우가 많다. 따라서 본 논문에서는 이러한 현실적인 제약을 극복하고자 흡수제의 기-액 상평형에 대한 이론적인 접근법을 적용하였다. 12 wt% $NH_3$ 수용액을 이용한 $CO_2$ 흡수 공정에서 최적 흡수 재생 조건 파악에 적용된 이론적인 접근법을 20 wt% Monoethanl amine (MEA) 수용액에 적용하여 흡수제의 최적 재생 조건을 예측하였다. 12 wt% $NH_3$ 수용액을 $CO_2$ 흡수 재생 공정에 사용할 경우, 재생 공정으로 공급하는 흡수액의 $CO_2$ 부하(loading)를 0.4 이하로 유지하는 것이 필요한 반면, 20 wt% MEA 수용액을 사용하는 경우에는 재생 공정으로 공급되는 흡수액의 $CO_2$ 부하에 대한 제한이 필요 없음을 알 수 있었다. 최적 재생 온도는 이론적 접근법을 이용해서 재생 공정으로 공급되는 흡수액의 $CO_2$ 부하에 따라 결정할 수 있으며, 재생된 흡수액의 $CO_2$ 부하는 흡수 공정에서 필요한 $CO_2$ 흡수량에 따라 결정되고 이를 기준으로 최적 재생 온도에 해당하는 열원의 공급량을 결정할 수 있게 된다. 12 wt% $NH_3$ 수용액을 이용한 실험실 규모의 연속 $CO_2$ 흡수 재생 실험에서 최적 재생 조건을 비교적 정확하게 예측할 수 있었던 이론적 접근법을 20 wt% MEA 수용액에 적용하여 최적 재생 조건 예측에 적용할 수 있음을 확인하였고, 실제 화학흡수제를 이용한 $CO_2$의 흡수 재생 공정의 설계 및 운전에 사용할 수 있는 가능성을 확인하였다.