• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1724-1728
• /
• 2007

In this paper we propose a novel electrode structure for high transmittance in the Patterned Vertical Alignment (PVA) LC cell. We use the 'TechWiz LCD' for calculation of the director configuration and optical characteristics. We studied the area decreasing the transmittance through the electrode structure for wide viewing angle and proposed new electrode design to change LC director configuration in the area. We show the comparison of the calculated optical transmittance between the conventional PVA mode and the proposed PVA mode. From the results, we confirm that the optical transmittance of the proposed structure of the PVA cell becomes higher.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1815-1817
• /
• 1999

In this paper, the generation of high pretilt angle in nematic liquid crystal (NLC) by dipping effect on three kinds of the rubbed polyimide (PI) surface was investigated. The generated pretilt angle of NLC increases due to dipping effect before rubbing treatment on two kinds of the rubbed PI surface with side chain. The generated pretit angle in NLC by using dipping effect after rubbing treatment on PI surface with short side chain is high compared to the PI surface with long side chain. The generated pretit angle of the positive type NLC $(\Delta{\varepsilon}>0)$ is higher as than that of the negative type NLC $({\Delta}{\varepsilon}<0)$ by using dipping effect before rubbing treatment on homeotropic layer. The generated pretilt angle of NLC is attributed to perpendicular component of permittivity ${\varepsilon}_{\perp}$ of NLC on rubbed PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.159-159
• /
• 2009

We characterize a flexible self-assembled liquid crystal display (LCD) fabricated from a polyimide (PI) alignment layer with polydimethylsiloxane pixel walls. Ion beam (IB) irradiation aligned LC molecules in the PI layer and bonded two flexible plastic substrates in a one-step assembly of the pixel walls. X-ray photoelectron spectroscopic analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy provided chemical and physical evidence for the formation of stable chemical bonds between the PI layer and the PDMS pixel walls in addition to the important maintenance of a uniform 6 um gap between the two substrates without the use of any epoxy resins or other polymers.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.89-114
• /
• 1996

Liquid crystal-polymer composite(LCPC) films consisting of a continuous LC phase embedded in a three-dimensional network of polymer matrix are formed by photopolymerization-induced phase separ on. The LCPC films are switched from a light-scattering stats to a highly transparent stats on the application of electric fields. Since the alignment of LC molecular determines the electro-optical properties of films, the requirement for good contrast is to generate the nematic phase at high concentration. On the other hand, the concentration of UV-curable monomer must be increased above some critical value to from the flexible matrix of unbounded polymer. The mixing ratio of LC and UV-curable monomer affects the electro-optical and viscoelastic properties of LCPD films in two opposing ways. By controlling the phase separation process, at an LC fraction of 0.7, the maximum performance of LCPC films has been achieved, the response time of which is 2ms on the application of electric fields.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.21-25
• /
• 1998

Organic-based electroluminescent devices have attracted lots of interests because of their possible application as a large-area flat panel display. Polyimides have been used for photo-alignment in LCD(Liquid Crystal Display). However, the devices used in this study were fabricated with polyimide doped with N,N'-Diphenyl-N,N'-di(m-tolyl)-benzidine(TPD) (3, 10, 30wt%) for electroluminescent hole tranforting layer(EHTL). The photochemical and physical properties of EHTL was studied. The film thicknesses were reduced under illumination with UV light. Polyimide films doped with TPD(3wt%) was irradiated and the electrical properties of the films were studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.327-329
• /
• 2008

We have studied the optically compensated splay (OCS) mode using reactive mesogen monomer to reduce critical voltage, setting voltage and phase transition time from initial bend to splay state. The high pretilt angle from vertical alignment was formed through the polymerization of UV curable RM monomer at the surfaces. In this way, orientation of the LC with OCS can be achieved without setting voltage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.726-730
• /
• 2002

Electro-optical (EO) performances of the ion beam (IB) aligned twisted-nematic (TN)-liquid crystal display (LCD) with ion beam exposure on the new diamond-like carbon (DLC) thin film surface were investigated. A good voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min was observed. Also, the fast response time of the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min can be achieved. Finally, the residual DC voltage of the ion beam aligned TN-LCD on the DLC thin film surface is almost the same as that of the rubbing aligned TN-LCD on a polyimide (Pl) surface.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1385-1387
• /
• 1998

In this paper, we studied the electro-optical(EO) performance of photo-aligned twisted nematic(TN)-liquid crystal display(LCD) with oblique non-polarized ultraviolet (UV) light irradiation on polyimide (PI) surface. The monodomain alignment of photo-aligned TN-LCD is obtained with an angle of incidence of $85^{\circ}$ on PI surface. Also, we observed that the voltage transmittance and response time characteristics of photo-aligned TN-LCD is almost same compared to rubbing treated TN-LCD. Finally, we measured that the voltage-holding-ratio(VHR) of photo-aligned TN-LCD is almost same compared to rubbing treated TN-LCD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.118-120
• /
• 2002

Electro-optical (EO) characteristics of the ion beam (IB) aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the diamond-like carbon (DLC) thin film surface were studied. An excellent voltage-transmittance (V-T) curve of the ion beam aligned IN-LCD was observed with oblique ion beam exposure on the DLC thin film surface for I min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the DLC thin film surface for 1 min can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.407-410
• /
• 2005

We report on a high speed flexible display based on a deformed helix ferroelectric liquid crystal (DHFLC) in a vertically aligned configuration. The mechanical stability of the flexible DHFLC display was achieved using a periodic array of columnar spacers formed directly on the top sides of in-plane electrodes by the photolithography technique. Several unique features of display performances such as flexibility, uniform alignment, fast response, and gray scale capability were obtained.