• Journal of Information Display
• /
• 제5권2호
• /
• pp.19-22
• /
• 2004

A ${\pi}$ cell is initially in splay state. Before driving a ${\pi}$ cell, transition from splay to bend state is always necessary which originates from nucleation. We propose a novel technique to make bend transition fast and effectively by forming transition cores around the pixels with the technique of multi-domain alignment, where domain boundaries play a crucial role in splay to bend transition. This noble technique enables the splay to bend transition to occur within less than 2 seconds with a low applied voltage.

• 폴리머
• /
• 제34권3호
• /
• pp.242-246
• /
• 2010

선택 반사를 보이는 콜레스테릭 액정의 planar 배열과 선택적 반사 효율과의 연관성에 대하여 FTIR spectroscopy를 이용하여 정량적으로 조사하였다. Cholesteric liquid crystal(CLC) 내 planar 배열이 잘 유도될수록 선택 반사율이 높아짐을 알 수 있었고, 배향막을 사용하지 않고 shear force 효과에 의해서만 planar 배열을 유도할 수 있었지만 완전한 planar 배열을 유도하기 위해서는 배향막을 사용하는 것이 효과적이었다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.21-25
• /
• 2006

In this study, liquid crystal (LC) aligning properties for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method with electron beam system in accordance with the evaporation angles were investigated. Also, the control of pretilt angles homeotropic aligned LC on $SiO_x$ thin film as the function of the evaporation angles were studied. The uniform vertical LC alignment on the $SiO_x$ thin film surfaces with electron beam evaporation was achieved with all of the thin film angle conditions. It is considerated that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation. The values of the pretilt angles according to the evaporation angle were from about $0.7^{\circ}$ to about $3.4^{\circ}$. The highest pretilt angles of about $3.4^{\circ}$ in aligned NLC on the $SiO_x$ thin film surfaces by electron beam evaporation were measured under the condition of $45^{\circ}$. Also, good LC alignment states on the treated $SiO_x$ thin film layer by electron beam evaporation were observed at annealing temperature of $250^{\circ}C$. Consequently, the high pretilt angle and the good thermal stability of LC alignment on the $SiO_x$ thin film by electron beam evaporation can be achieved.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.243-246
• /
• 2008

We have studied the liquid crystal (LC) alignment, the pretilt angle generation, and the annealing behavior for a nematic liquid crystal (NLC) on the homogeneous polyimide (PI) surfaces by using the rubbing method and the ion beam (IB) method. An excellent LC alignment of the NLC on the PI surface with rubbing and IB irradiation were observed. The pretilt angle of NLC on the homogeneous PI surface for the rubbing method is decreased from $4.5^{\circ}$ to $3.5^{\circ}$ as rubbing time is increased, that of the for the IB irradiation method is decreased from $0.5^{\circ}$ to $0.1^{\circ}$ as the time of IB irradiation is increased. After the annealing, the pretilt angles of the rubbed PI surfaces increased up to $4^{\circ}$, these of the IB irradiated PI surfaces little increased. It is considered the side chain of the rubbed PI show the its abilities of the original capacities, while the side chain of the IB irradiated PI cannot show the its abilities of the original capacities due to the IB has already destroyed the side chain of the PI.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.124-127
• /
• 2002

LC aligning capabilities and the variation of pretilt angles with ion beam irradiation on the a-C:H thin films, and electro-optical (EO) performances of the ion beam aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the a-C:H thin film were studied. A high pretilt angle of $3.5{^{\circ}}$ via ion beam irradiation on the a-C:H thin film was measured. Also, the LC pretilt angle decreased due to the increase in surface roughness at over 2 min of IB exposure time. It is considered that this roughness increase due to increasing IB exposure time that generated destroy of oriented rings of atoms related to LC alignment. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the a-C:H thin film for 1 min can be achieved. Finally, the residual DC property of the ion beam aligned TN-LCD with ion beam exposure of 1 min on the a-C:H thin film is almost same as that of the rubbing aligned TN-LCD on a PI surface.

• 폴리머
• /
• 제30권2호
• /
• pp.97-107
• /
• 2006

방향족 강직사슬 폴리이미드는 높은 주사슬 간의 인력으로 인해 유기용제에 용해되지 않고 상전이온도가 분해 온도보다 높아 응용분야에 많은 제한이 되고 있다. 방향족 폴리이미드의 가공성을 향상시키기 위해서 긴 곁사슬을 도입하면 가공성 향상뿐만 아니라 곁사슬과 주사슬 사이에 독특한 구조를 가지게 됨으로써 새로운 응용분야를 개척할 수가 있다. 본 논문에서는 여러 가지 형태의 곁사슬을 가지는 방향족 폴리이미드의 합성과 화학구조에 따른 물성변화에 대해 논의하고 또한 폴리이미드의 액정배향막, 감광재료, 교대 다층박막, 발광재료 등으로의 응용특성에 관해서도 조감한다.

• 반도체디스플레이기술학회지
• /
• 제7권3호
• /
• pp.41-43
• /
• 2008

The electro-optical characteristics of the Liquid Crystal on Silicon (hereinafter "LCOS") micro-display on vertically alignment (VA) mode were studied depending on various cell gaps. 5 different cell gaps, such as $1.4{\mu}m,\;1.8{\mu}m,\;2.1{\mu}m,\;2.4{\mu}m$ and $2.8{\mu}m$, were selected. The reflectance-voltage (R-V) characteristics, distributions of reflected light and reflectance were calculated with 3-dimmensional LC code. At the center of cell, the smallest $1.4{\mu}m$ cell gap showed the lowest reflectance and the largest $2.8{\mu}m$ cell gap showed the highest reflectance due to the surface anchoring effect. In case of $2.1{\mu}m$ cell gap, the sum of reflectance overall cell was the highest value. Considering the reflectance and RV curve characteristic, the optimized cell gap was $2.1{\mu}m$.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.871-874
• /
• 2004

In recent, it is said that the trend of LCD is direction to pursue high qualities like as high transmittance, high contrast ratio, wide viewing angle, fast response time, and so on. Especially, it is known that these qualities are essential to large size LCD like as LCD TV and we can realize them through to uniform cell gap and deep black state. Until now, the ball spacer has been used to control of uniform cell gap. However, the existence of ball spacer inside the cell causes the deformation of the liquid crystal molecules and damage to alignment layer. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. Nowadays, this problem has been solved by using Patterned Spacer on Color Filter. but Side Effect just as gravity mura has been induced. In this paper, we studied the mechanism on gravity mura in case of using patterned spacer on color filter.

• Transactions on Electrical and Electronic Materials
• /
• 제7권2호
• /
• pp.81-86
• /
• 2006

In this paper, the response surface modeling of the control of the pretilt angle in the nematic liquid crystal on the homogeneous polyimide surface with different surface treatment is investigated. The pretilt angle is one of the main factors to determine the alignment of the liquid crystal display. The pretilt angle is measured to analyze the variation of the characteristics on the various process conditions. The rubbing strength and the hard baking temperature are considered as input factors. After the design of experiments is performed, the process model is then explored using the response surface methodology. The analysis of variance is used to analyze the statistical significance and the effect plots are also investigated to examine the relationship between the process parameters and the response.

• Transactions on Electrical and Electronic Materials
• /
• 제6권3호
• /
• pp.106-109
• /
• 2005

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with in-situ photoalignment method on polyimide (PI) surfaces using polymer films. Especially, we studied in-situ photoalignment changing heating temperature from $50^{\circ}C\;to\;120^{\circ}C$ on the polymer film. The LC aligning capabilities and pretilt angle on the polymer substrates were better than those on the glass substrate using in-situ photoalignment method. It is considered that this increase in pretilt angle may be attributed to the roughness of the micro-groove substrate induced by the in-situ photoalignment. As temperature of heated subtrate and UV exposure time increase, pretilt angle of the cell used polymer film increased. It is considered that the heating temperature of substrate is attributed to generate pretilt angle. Also, electro-optical performances of the in-situ photoaligned TN cell using the polymer substrate are almost the same as that of the TN cell using the glass substrate.