• 한국분무공학회지
• /
• 제6권4호
• /
• pp.14-21
• /
• 2001

Rotary atomizer is widely used in practical application ranging from combustion, cooling, spray drying, agriculture, chemical system. Rotary cup atomizer has some advantages such as extreme versatility and liquid atomization successfully varying widely in viscosity. In rotary atomization, the feed liquid is centrifugally accelerated to high velocity and the liquid extends over the rotating surface as a thin film before being discharged into an atmosphere. The degree of rotary atomization depends upon peripheral speed, feed rate, liquid properties and atomizer design. An important asset is that thickness and uniformity of the liquid sheet can readily be controlled by regulating the liquid flow rate and the rotational speed. LDPA(Laser Diffraction Particle Analyser) and image aquisition system are used to measure drop size distribution and spray pattern. The atomization characteristics of the rotary cup atomizer is investigated experimentally by varing the liquid feed rate, rotary cup speed and air velocity for atomization. As a results, the effect of air velocity on the atomization characteristics such as drop size and spray uniformity is considerably greater than variation of those with liquid feed rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.793-794
• /
• 2011

발사 전 발사체에 공급되는 추진제는 엔진의 정상작동을 위해 설정된 추진제 온도범위 내로 공급되어야 하며, 이는 발사체 공급계 시스템 내에서의 온도변화도 고려되어 발사 전 지상공급시스템 운용 절차에 반영된다. 본 논문에서는 나로호 발사대 액체산소 충전시스템의 액체산소 충전 온도 제어를 위한 시스템 운용절차와 액체산소 냉각방법에 대해 고찰한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.59-63
• /
• 2016

The superconducting NMR magnets have used cryogen such as liquid helium for their cooling. The conduction cooling method using cryocoolers, however, makes the cryogenic cooling system for NMR magnets more compact and user-friendly than the cryogen cooling method. This paper describes the thermal and structural analysis of a cryogenic conduction cooling system for a 400 MHz HTS NMR magnet, focusing on the magnet assembly. The highly thermo-conductive cooling plates between HTS double pancake coils are used to transfer the heat generated in coils, namely Joule heating at lap splice joints, to thermal link blocks and finally the cryocooler. The conduction cooling structure of the HTS magnet assembly preliminarily designed is verified by thermal and structural analysis. The orthotropic thermal properties of the HTS coil, thermal contact resistance and radiation heat load are considered in the thermal analysis. The thermal analysis confirms the uniform temperature distribution for the present thermal design of the NMR magnet within 0.2 K. The mechanical stress and the displacement by the electromagnetic force and the thermal contraction are checked to verify structural stability. The structural analysis indicates that the mechanical stress on each component of the magnet is less than its material yield strength and the displacement is acceptable in comparison with the magnet dimension.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.151-155
• /
• 2003

The coldbox operating with reverse brayton system for cooling HTS cable has been designed. This coldbox consists of heat exchangers, liquid-gas separator liquified nitrogen chamber and pump. The design was discussed in this paper. These results will be applied to commercial HTS cable in near future.

• Tribology and Lubricants
• /
• 제5권1호
• /
• pp.44-50
• /
• 1989

High strength steel is similar to carbon steel in its composition. This material is developed originally for special uses such as aerospace and automobile due to its high strength and shock-free property in spite of lightness. But the chemical attraction of high strength steel is serious, which includes comminution of formation, metalization and strengthening. Machining results in built-up edge between this material and the tool. Especially the work hardening behavior results in tool life shortening, which was caused by temperature generation during machining. In this study, cooling system was made in which liquid nitrogen is supplied to circulate in order to make up for these weaknesses. Machining of high strength steels, which is recognized as difficult to machine materials, was conducted after tool is cooled at -195$\circ$C. Experimental results showed that the tool was cooled down rapidly below -195$\circ$C in about 200 seconds. The tool temperature of machining with cooling system was lowered by 60~95$\circ$C than that of machining in room temperature. The hardness of the surface of chip is decreased by machining with cooling system. And the machining using the cooling system made it possible to increase shear angle, to retain smooth surface on chip without built-up-edge and to get a better roughness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.37-44
• /
• 2000

Numerical investigation is made to study the effects of natural convection on the formation of macrosegregation of a Pb-Sn alloy solidification process in a 2-D confined rectangle mold. The governing equations are calculated using previous continuum models with SIMPLE algorithm doring the solidification process. In addition. to track the solid-liquid interface with time variations. the moving boundary condition Is adopted and irregular interface shapes are treated with Boundary-Fitted Coordinate system. As the temperature reduce from the liquidus to the solidus, the liquid concentration of Sn. the lighter constituent, increases. Then the buoyancy-driven flow due to temperature and liquid composition gradients, called thermosolutal convection or double diffusion, occurs in the mushy region and forms the complicated macrosegregation maps. Related to this phnomena, effects on the macrosegregation formation depending on the cooling condition and gravity values are described.

• 대한기계학회논문집B
• /
• 제34권2호
• /
• pp.213-218
• /
• 2010

인공위성 적외선 탑재체의 열싱크 역할을 위해, 액체헬륨을 이용하여 극저온패널(가로 약 800 mm, 세로 약 700 mm)을 4.2 K까지 냉각시키는 시스템을 설계, 개발, 검증하였다. 유효직경 8 m, 유효 깊이 10 m의 대형열진공챔버에서 검증된 본 냉각시스템은 500리터 용량의 액체헬륨용기 두 개(극저온 패널로의 액체헬륨 또는 저온헬륨가스 주 공급용기 및 주공급용기로의 재충진용기)를 사용하였는데, 목표인 극저온패널의 냉각 및 온도제어는 주 공급용기 내부의 미세압력조절을 통해 액체헬륨 공급유량을 제어함으로써 이루었다. 극저온패널에 공급된 후 배기되는 저온 헬륨가스는 특별히 설계, 제작된 사중진공배관의 제3층을 흐르며 열차단막의 역할을 수행함으로써, 액체헬륨 공급 라인인 제1층(중심배관)으로의 열유입을 최소화하였다. 극저온패널을 상온에서 40 K(합성표준불확도 194 mK)까지 냉각시키는데 약 3시간이 소요되었으며, 20 W의 열을 발산하는 극저온패널을 40 K 주변 온도에서 1 K 이내의 온도균일도를 가지며 유지할 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권2호
• /
• pp.41-43
• /
• 2009

The HTS power cable system of 3-phase 100-m class has been tested at the KEPCO's Gochang power testing center in Korea during 8,000 hours or more for investigating long-term operating performance. The system is rated 22.9kV, 1250A and is cooled with sub cooled liquid nitrogen. Several cooling performance tests such as cooling capacity, heat load, AC loss, temperature stability and thermal cycle were performed at operating temperature of 66.4K and several different temperatures.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.936-946
• /
• 2005

The liquid nitrogen as an environmentally safe coolant has been widely recognized in cryo­genic machining, its function as a lubricant is plausible due to its chemical inertness, physical volatility and low viscosity. Since a reduced friction is a direct witness of the lubrication effect from a tribological viewpoint, this paper presents an evaluation of the apparent friction coefficient on the tool-chip interface in cryogenic cutting operations to prove and characterize the lubricity of LN2 in cryogenic machining. The cryogenic cutting technology used in this study is based on a cooling approach and liquid nitrogen delivery system which are intended to apply liquid nitrogen in well-controlled fine jets to selectively localized cutting zones and to penetrate liquid nitrogen to the tool-chip interface. It has been found that the apparent friction coefficient can be significantly reduced in cryogenic machining, depending on the approach of liquid nitrogen delivery.

• 대한전기학회논문지
• /
• 제43권6호
• /
• pp.958-964
• /
• 1994

To study on the superconducting properties with cooling conditions, silver-sheathed Bi-Pb-Sr-Ca-Cu-O wires fabricated by the powder-in-tube method. The wires cooled down in the furnace, air and liquid NS12T after sintering at 840$^{\circ}C$ Critical current density of sample cooled in the furnace is 5.1${\times}$10S03TA/cmS02T and sample cooled in the air is 40A/cmS02T at 77K, zero magnetic field. The latter is very low critical current density of Bi system. 2223 high-Tc superconducting phase of sample cooled in the air was distroyed. Properties of sample cooled down in the liquid nitrogen is the same as cooled in the furnace.