• 한국재난정보학회 논문집
• /
• 제12권3호
• /
• pp.286-291
• /
• 2016

본 연구에서는 불연성 무기단열재를 제조하기 위해 바인더 종류를 대체하여 열전도율을 충족시키고 경량 무기단열재 개발을 위해 연구하였다. 열전도율 측정은 열전도 측정기인 HFM-436을 이용하여 열전도율을 측정하였다. 무기단열재를 바인더 SH-1(액체), SH-2(고체)와 펄라이트를 배합하여 단열재 샘플1을 만들었고, SH-3(액체)와 펄라이트를 배합하여 단열재 샘플 2를 제조했다. 총 4개의 샘플을 제조했다. 각각 바인더와 펄라이트를 틀에 넣어 성형하였으며 완전건조 후 HFM-435을 이용하여 열전도율을 측정하였다. 두 가지 다른 바인더를 사용하여 열전도율을 측정하였고 바인더에 따른 열전도율의 영향을 분석하였다.

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.471-477
• /
• 1999

Fe and Fe-Mo binder were used to produce TiB2 based cermet by a pressureless sintering. The densification behaviour of TiB2-Fe-Mo cermet during liquid-phase sintering in argon was studied in relation to binder phase charactertics. The effects of Mo addition and sintering condition on the sintering behaviour and mechanical properties were also investigated. TiB2-based cermets with Fe-Mo binder composition showed a better sinterability than the cermets with only Fe binder. In TiB2-Fe-Mo cermet higher densities in the wide temperature range were obtained and also fully densified sintered cermet were obtained at 1873K The enhancement in the densification phenomenon of TiB2-Fe-Mo system can be explained by improved liquid phase wettability associated with the roles of Mo components as solute atoms. When Fe-Mo binders were used cermets with a finer grain size and enhanced mechanical properties wereproduced and new phases such as Fe2B and Mo2FeB2 were observed in the sintered cermet. The highest bending strength was obtained from the 20vol% Fe-Mo cermet and these hardness-fracture toughness combination in the wide binder compositions is better than that of TiB2-Fe cermet. In order to improve mechanical properties microstructure control with high purity powders is desirable because high purity powders prevent the formation of Fe2B and Mo2FeB2 phase which comsume the ductile binder phase.

• 한국건축시공학회지
• /
• 제16권1호
• /
• pp.45-52
• /
• 2016

본 연구에서는 무시멘트 결합재(NCB)를 사용한 지반 그라우팅용 약액주입재의 B액 결합재의 종류, 결합재의 W/B 및 A액과 B액의 부피비에 따른 겔타임 및 호모겔강도의 변화 특성을 검토함으로써 무시멘트 결합재의 지반 그라우팅용 결합재로서의 적용 가능성을 검토하고자 하였다. 무시멘트 무기결합재는 당사에서 공동연구를 통해 개발된 시멘트를 대체할 수 있는 고로슬래그 기반의 친환경 무기결합재로서 화학조성비가 다른 NCB-1, 2, 3을 사용하여 실험을 진행하였다. 실험 및 현장 적용성 분석 결과, 겔타임 및 호모겔강도의 요구성능을 확보할 수 있는 결합재 종류별 W/B 및 A액과 B액의 부피비가 도출되었으며, W/B가 100~140%, A : B가 50 : 50~30 : 70인 조건에서 급결구간 및 중결구간의 경우 NCB가 OPC 대비 동일한 겔타임 수준에서 호모겔강도의 확보가 유리한 것으로 평가되어 NCB의 지반 그라우팅용 결합재로서의 적용이 가능할 것으로 판단된다.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.54-61
• /
• 2005

Liquid-phase catalytic degradation of waste high-density polyethylene (HDPE) over ZSM-5 (powder type (PW)) and ZSM-5+binder (granule type (GR)) has been investigated with a stirred semi-batch operation at 400°C. Two ZSM-5 catalysts with a different crystal size were synthesized and also each ZSM-5 (25%) Catalyst was mixed with a same binder (kaolin: silica sol: alumina = 55%:10%:10%). The performance of prepared catalysts that has different physicochemical properties was discussed with the cumulative amount distribution, molecular weight distribution and also paraffin, olefin, naphthene and aromatic (PONA) distribution in liquid product. These liquid product quality and distributions were changed depending on the physicochemical properties of the catalyst. Moreover, the characteristic of ZSM-5 in the catalyst was strongly influenced on the activity and PONA distribution in liquid product.

• 한국주조공학회지
• /
• 제41권6호
• /
• pp.516-520
• /
• 2021

주조공정에서 사형 제작 시 사용된 바인더는 고온의 용탕에 의해 다양한 가스를 발생시키며 이러한 가스는 가스결함을 유발하게 된다. 본 연구에서는 기존의 주물사와 바인더가 혼합된 주형 블럭을 활용하여 발생 가스부피를 산출하는 방법과 달리 액상 바인더, 고상 바인더, 주물사 등 사형을 구성하는 구성 요소별로 각각 시편을 만들고 열중량 분석기 (Thermo Gravimetry )와 질량분석기 (Mass Spectrometer)를 활용하여 온도에 따른 중량감소, 가스발생 성분을 측정하고 가스발생량을 분석하였다. 액상 바인더와 고상화 바인더의 TG결과로부터 촉매제에 의한 탈수량을 산정하였고 발생 가스성분이 서로 다름을 분석하였다. 또한 TG와 MS 결과를 상호 분석하여 각 가스성분별 발생량을 간접적으로 정량화 하였다. 이를 활용하면 추후 주조공정해석에서 가스발생량을 정량적으로 예측하는데 사용할 수 있다.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.124-128
• /
• 1997

An attempt was made to understand the dissolution and reprecipitation behavior of the constituent phases such as TiC, TiN, and Ti(CN) in TiC-TiN-Ni system. During the liquid-phase sintering the TiC phase was found to dissolve preferentially in Ni binder. The solid-solution phase, Ti(CN), formed around the TiN phase, resulting in a core/rim structure. This result was reproduced when large TiC particles were used with fine TiN particles. The path for the microstructural change in TiC-TiN-Ni system was largely controlled by the difference in the interfacial energy of each phase with the liquid binder phase. The results were discussed with thermodynamic principles.

• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1821-1826
• /
• 2009

Liquid crystal display (LCD) devices contain a colour filter which can visualise colour images by transmitting or absorbing light. Colour properties of LCD mainly depend on colour materials such as pigments and polymeric binders. In this paper, colour properties were studied to improve colour quality of LCD. Generally, the colour properties can be classified into three categories which are colour purity, brightness and contrast ratio. For this study, photo resists were prepared by treatment of pigments and synthesis of polymeric binder. The treated pigments were dispersed and formulated with additives for preparing a photo resist that could be used for manufacturing colour filters. As a result of what we studied, type, mixture ratio and concentration of pigments were very important to improve colour purity of LCD device.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.113-119
• /
• 2013

PURPOSES : The objectives of this study are to develop the eco-friendly pavement material using polyurethane binder and evaluate mechanical properties of the developed binder and concrete. METHODS : The bending beam test was conducted to select the sample candidates of polyurethane binder based on the bending strength. The characteristics of viscosity, curing time, and temperature change of sample binder was examined on different temperature conditions. The mechanical properties of polyurethane binder was estimated using the dynamic modulus testing. The indirect tensile strength test was conducted on polyurethane binder concrete with different gradation and binder content for evaluating the mechanical properties of concretes. RESULTS : Based on the beading beam test, four different binder samples were prepared for estimate the mechanical properties. The viscosity of polyurethane binder tends to increase with increase of liquid temperature and the hardening phenomenon begins 10 to 15 minutes at room temperature after mixing the resin and hardener. It is observed that the dynamic modulus of binder increases as loading frequency increases and change of modulus is found to be the highest in the PU-2I binder type. The PU-2I binder concretes shows the largest value of indirect tensile strength and indirect tensile energy. CONCLUSIONS : The use of polyurethane binder as pavement materials is capable of increasing the pavement performance and reducing the detrimental environmental effect during the highway construction.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.107-116
• /
• 2013

PURPOSES: The liquid-type chemical warm-mix asphalt (WMA) additive has been developed. This study evaluates the basic properties of the additive and the mechanical properties of WMA asphalt and mixture manufactured by using the newly developed chemical additive. METHODS: First, the newly developed WMA additive was applied to the original asphalt by various composition of additive components and dosage ratio of additive. These WMA asphalt binders were evaluated in terms of penetration, softening point, rotational viscosity, and PG grade. Based on the binder test results, one best candidate was chosen to apply to the mixture and then the mechanical properties of WMA mixture were evaluated for moisture susceptibility, dynamic modulus, and rutting and fatigue resistance. RESULTS : According to the binder test, WMA asphalt binders showed the similar properties to the original asphalt binder except the penetraion index of WMA additive was a little higher than original binder. From the Superpave mix design, the optimum asphalt content and volumetric properties of WMA mixture were almost the same with those of hot mix asphalt (HMA) mixture even though the production and compaction temperatures were $30^{\circ}C$ lower for the WMA mixture. From the first set of performance evaluation, it was found that the WMA mixture would have some problem in moisture susceptibility. The additive was modified to improve the resistance to moisture and the second set of performance evaluation showed that the WMA mixture with modified chemical additive would have the similar performance to HMA mixture. CONCLUSIONS : Based on the various laboratory tests, it was concluded that the newly developed chemical WMA additve could be successfully used to produce the WMA mixture with the comparable performance to the HMA mixture. These laboratory evaluations should be confirmed by applying this additive to the field and monitoring the long-term performance of the pavement, which are scheduled in the near future.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.538-544
• /
• 2022

In existing ceramic mold manufacturing processes, inorganic binder systems (Si-Na, two-component system) are applied to ensure the effective firing strength of the ceramic mold and core. These inorganic binder systems makes it possible to manufacture a ceramic mold and core with high dimensional stability and effective strength. However, as in general sand casting processes, when molten metal is injected at room temperature, there is a limit to the production of thin or complex castings due to reduced fluidity caused by the rapid cooling of the molten metal. In addition, because sodium silicate generated through the vitrification reaction of the inorganic binder is converted into a liquid phase at a temperature of 1,000 ℃. or higher, it is somewhat difficult to manufacture parts through high-temperature casting. Therefore, in this study, a high-strength ceramic mold and core test piece with effective strength at high temperature was produced by applying a Si-Na-Ti three-component inorganic binder. The starting particles were coated with binary and ternary inorganic binders and mixed with an organic binder to prepare a molded body, and then heat-treated at 1,000/1,350/1,500 ℃ to prepare a fired body. In the sample where the two-component inorganic binder was applied, the glass was liquefied at a temperature of 1,000 ℃ or higher, and the strength decreased. However, the firing strength of the ceramic mold sample containing the three-component inorganic binder was improved, and it was confirmed that it was possible to manufacture a ceramic mold and core via high temperature casting.