• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.104-104
• /
• 2015

Due to the demand of the cold neutron flux in the neutron science and beam utilization technology, the cold neutron source (CNS) has been constructed and operating in the nuclear research reactor all over the world. The majority of the heat load removal scheme in the CNS is two-phase thermosiphon using the liquid hydrogen as a moderator. The CNS moderates thermal neutrons through a cryogenic moderator, liquid hydrogen, into cold neutrons with the generation of the nuclear heat load. The liquid hydrogen in a moderator cell is evaporated for the removal of the generated heat load from the neutron moderation and flows upward into a heat exchanger, where the hydrogen gas is liquefied by the cryogenic helium gas supplied from a helium refrigeration system. The liquefied hydrogen flows down to the moderator cell. To keep the required liquid hydrogen stable in the moderator cell, the CNS consists of an in-pool assembly (IPA) connected with the hydrogen system to handle the required hydrogen gas, the vacuum system to create the thermal insulation, and the helium refrigeration system to provide the cooling capacity. If one of systems is running out of order, the operating research reactor shall be tripped because the integrity of the CNS-IPA is not secured under the full power operation of the reactor. To prevent unscheduled reactor shutdown during a long time because the research reactor has been operating with the multi-purposes, the introduction of the standby cooling system (STS) can be a solution. In this presentation, the design considerations are considered how to design the STS satisfied with the following objectives: (a) to keep the moderator cell less than 350 K during the full power operation of the reactor under loss of the vacuum, loss of the cooling power, loss of common electrical power, or loss of instrument air cases; (b) to circulate smoothly helium gas in the STS circulation loop; (c) to re-start-up the reactor within 1 hour after its trip to avoid the Xenon build-up because more than certain concentration of Xenon makes that the reactor cannot start-up again; (d) to minimize the possibility of the hydrogen-oxygen reaction in the hydrogen boundary.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1548-1562
• /
• 2003

This paper is the first of several companion papers which compare the methods of Air-fuel ratio determination. There are many methods which calculate Air-Fuel ratio from exhaust emission. Most of them are based on the simple chemical equations, which use balance of atom, and the error of the calculation is negligible as far as the instrumentation accuracy is guaranteed. They assume homogeneous mixture and complete combustion to the extent of oxygen availability. Because of these simple assumptions, they cannot offer the information about the fuel distribution state and the malfunction of instrument. For these limitations, Eltinge offered new one based on stricter mathematical model. This result coincides with the others very well and gives more information about the mixture state and instrumentation. Consequently this might be a general solution for Air-fuel ratio determination and exhaust composition. The objects of the calculation, however, were not commercial fuels except gasoline and the compensation method of unburned hydrocarbon was not appropriate to recent analyzer. Moreover he did not consider the fuel which contains oxygen, such as methanol, ethanol and blend of gasoline-alcohol. In this paper, Eltinge chart is expanded to the arbitrary fuel composition as the reference exhaust compositions for the purpose of further discussions about Air-fuel ratio determination methods and the charts fur gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane, butane are illustrated.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.218-226
• /
• 2007

In modern naval ships, the design of submarines has continually evolved to improve survivability and it is also important to design ship against shock response. Exiting underwater ship design has been peformed due to results of static analysis considering shock acceleration by simple method. However, it can not be anticipated good assesment. The present study applied the Arbitrary Lagrangian-Eulerian (ALE) technique, a fluid-structure interaction approach, to simulate an underwater explosion and investigate the survival capability of a damaged submarine liquefied oxygen tank. The Lagrangian-Eulerian coupling algorithm and the equations of state for explosives and seawater were also reviewed. It is shown that underwater explosion analysis using the ALE technique can accurately evaluate structural damage after attack. This procedure could be applied quantitatively to real structural design.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1563-1571
• /
• 2003

This paper is the second part of several companion papers which compare the method of Air-fuel ratio(AFR) determination. In the previous paper, Eltinge chart was applied to the arbitrary fuel composition and the charts for gasoline, diesel, methanol, M85, liquefied petroleum gas(LPG), natural gas(NG), propane and butane were illustrated. In Eltinge chart, however, unburned hydrocarbon (UHC) is not used for determination of AFR. For improving accuracy, Eltinge suggested UHC compensation after the AFR reading in the chart. This compensation reduced the difference between real and reading value. In the compensation, however, the correction of oxygen and carbon dioxide is uncertain and there might be a mistake in conversion of UHC reading value. Therefore, the error is overestimated comparing with Spindt one which is most widely used. In addition, there is no comparison of the value with other useful methods. In this paper, the compensation of unburned HC was performed in Eltinge chart and the compensated value was compared with Spindts formula over wide range of AFR. The objects of investigating fuel are gasoline, methanol, NG and LPG. The result shows that Eltinge and Spindt method is flawlessly compatible and the difference between the two methods is under 0.3% in a λrange from 0.9 to 1.7. The method fur debugging instrumentation error is also presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.321-326
• /
• 2006

Vitiated air heater which could supply air of 700K and 6 bar was designed conceptually for the firing test on the ground of the air breathing propulsion engines. This vitiated air heater consists of premixer with air and excessive gas oxygen, mixing head, combustor with gas passage, convergent-divergent nozzle and diffuser. the fuel was natural gas and/or liquefied natural gas. Through computational fluid dynamics, each component of the air heater was analyzed and flame-holding after ignition was investigated.

• Journal of Power Electronics
• /
• v.5 no.4
• /
• pp.305-311
• /
• 2005

Throughout the world, studies on the water energization are currently under way. Of those, Brown gas, which is generated through the electrolyzation of water and is a mixed gas of the constant volume of 2 parts hydrogen to 1 part oxygen, has better characteristics in terms of economy, energy efficiency, and environmental affinity than those of acetylene gas and LPG (Liquefied Petroleum Gas) used for existing welding machines. This paper analyzes the characteristics of Brown gas and presents methods for increasing the generating efficiency of Brown gas by designing a power supply to deliver power to a water-electrolytic cell and designing a cylindrical electrode to improve the efficiency of the electrolyzer needed for water electrolyzation. Based on the above the methods, a welding machine using Brown gas is developed. And the generation efficiency of Brown gas is measured tinder different conditions (duty ratio, frequency and amplitude) of supplied power.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.5
• /
• pp.1591-1602
• /
• 1996

In operating the underwater engines such as encountered in exploring submarines, the dumping of the exhaust gas out of the engine requires a large portion of the total power, frequently amounting to 25-30% of the power generated. This unfavorable circumstance can be cured by liquefying the exhaust gas and storing it. In the present study, two liquefaction systems were simulated to enhance the overall efficiency; one is a closed cycle diesel engine and the other is a closed cycle LNG engine. The liquefied natural gas (LNG) is chosen as a fuel, not only because its use is economical but also because its cold energy can be utilized within the liquefaction system. Since a mixture of oxygen and carbon dioxide is used as an oxidizer, liquefying carbon dioxide is of major concern in this study. For further improving this system, the intercooling of the compressor is devised. The necessary power consumed for the liquefying system is examined in terms of the related properties such as pressure and temperature of the carbon dioxide vessel as a function of the amount of the exhaust gas which enters the compressor. The present study was successful to show that much gain in the power and reduction of the vessel pressure could be achieved in the case of the closed cycle LNG engine. The compression power of exhaust gas were observed remarkably lower, typically only 6.3% for the closed cycle diesel engine and 3.4% for the closed cycle LNG engine respectively, out of net engine power. For practicality, a design -purpose map of the operating parameters of the liquefaction systems was also presented.

• Ocean and Polar Research
• /
• v.27 no.1
• /
• pp.59-65
• /
• 2005

To assess the effect of anaesthetic on stress response in cultured sweetfish (Plecoglossus altivelis) during transportation, the levels of plasma cortisol, glucose, lactic acid, $Na^+,\;K^+,\;Cl^-$, osmolality and survival were determined. The transportation was performed in square boxes where liquefied oxygen was saturated in polyethylene bags. Fish transportation was carried by car for 2 hours after anaesthesis with lidocaine-HCl/1,000 ppm $NaHCO_3$ in experiment. Mean plasma cortisol concentration before transportation was 170.7ng/ml. After transportation, the levels of plasma cortisol increased to 518.5ng/ml (Control), 461.9ng/ml (Sham control), 369.4ng/ml (20ppm anaesthetic), 304.0ng/ml (40 ppm anaesthetic), 405.7ng/ml (80 ppm anaesthetic) and 499.1ng/ml (160ppm anaesthetic) in each experimental groups, respectively (p<0.05). However levels of glucose, lactic acid, $Na^+,\;Cl^-$ and osmolality in 40ppm anaesthetic group did not show significant differences in this before and after transportation (P>0.05). These result reveal an anaesthetic lidocaine HCl/1,000ppm $NaHCO_3$ is effective as sedative for transportation mixture in this species. This research provides baseline data on cortisol, glucose, lactic acid, $Na^+,\;K^+,\;Cl^-$, osmolality and survival for anaesthetic transportation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.54-65
• /
• 2022

We are developing a compact ignition device that can provide a multi-ignition capability for an upper stage methane engine of a two staged small satellite launch vehicle. Firstly, the multi-ignition device is designed and built as an integral part of an additively manufactured mixing head. Secondly, the ignition device requires no separate high-pressure vessels to store ignition propellants as they are branched out from the main feed lines for the mixing head. We performed experiments at various levels, including igniter autonomous tests, thrust chamber ignition and combustion tests on the new compact ignition device which is integrated in the thrust chamber of one-tonf class liquid oxygen/liquid methane engine, and confirmed stable ignition performance.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1389-1402
• /
• 2013

This paper focuses on the impacts of waste dumping on inorganic nutrients in the dumping area of the Yellow Sea, and the effect of an governmental regulation of pollution in dumping areas. The environmental variables and parameters of the dumping and reference areas in the Yellow Sea were measured during July 2009 and analyzed. In addition, the analyzed data for inorganic nutrients over the last 10 years were obtained from the Korea Coast Guard (KCG) and the National Fisheries Research and Development Institute (NFRDI). The chemical environment of the study area revealed increases in concentrations of inorganic nutrients, Chemical Oxygen Demand (COD), and Volatile Suspended Solids (VSS) in the bottom layer. On the contrary, the pH level was decreased. Most notably, the time series data of inorganic nutrients showed gradual increase over time in the dumping area, and thus, the oligotrophic waters trend toward eutrophic waters. The increases appears to be due to the disposal of large amounts of organic waste. In recent times, the wastes disposed at the area were largely comprised of livestock wastewater, and food processing waste water. The liquefied waste, which contains an abundance of nutrients, causes a sharp increase in concentrations of inorganic nitrogen in the dumping area. On the one hand, the dumping sites have been deteriorated to such an extent that pollution has become a social problem. Consequentially, the government had a regulatory policy for improvement of marine environmental since 2007 in the dumping area. Hence, the quality of marine water in the dumping site has improved.