• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.294-301
• /
• 2005

Ground response analysis is one of the most important and most commonly encountered problems in geotechnical earthquake engineering. It is a prerequisite step for liquefaction assessment of saturated soil or the pseudo-static and dynamic analysis of geotechnical structures. A number of techniques have been developed for ground response analysis. In this study, ground response analyses were performed using the computer programs that are currently being used domestically. From these analyses, the analysis techniques applied to the programs were compared and analyzed. The results of ground response analyses were compared as follows: 1) 1-dimensional analysis vs. 2-dimensional analysis; 2) equivalent linear analysis vs. nonlinear analysis.

• Preventive Nutrition and Food Science
• /
• 제11권4호
• /
• pp.318-322
• /
• 2006

The objective of this experiment was to investigate the effect of extrusion of ginseng roots in twin screw extruder on susceptibility of ginseng starch toward hydrolysis by ${\alpha}-amylase$ BAN 480L (Novozyme, Denmark) and cellulase Celluclast 150L and saccharification by amyloglucosidase AMG-E (Novozyme, Denmark). The extrusion was conducted at 22% and 30% moisture contents of feed at screw speed 300 rpm. Barrel temperature at zone 1 was adjusted at $100^{\circ}C$ and $120^{\circ}C$. The results showed that extrusion process improved the ginseng ${\alpha}-amylase$ susceptibility as compared to traditionally dried ginseng (white and red ginseng). Reducing sugar of hydrolyzed extruded samples was 2,500% of its initial concentration, whereas the reducing sugar of hydrolyzed non-extruded sample was only 200% of its initial concentration. However, addition of cellulase during liquefaction lowered the saccharification yield of both non-extruded and extruded samples as well.

• Geomechanics and Engineering
• /
• 제35권4호
• /
• pp.449-464
• /
• 2023

Advanced nonlinear effective stress constitutive models are started to be frequently used in one-dimensional (1D) and two-dimensional (2D) site response analysis for assessment of porewater generation and liquefaction potential in soft soil deposits. The emphasis of this research is on the assessment of the implementation of this category of models at the element stage. Initially, the performance of a coupled porewater pressure (PWP) and constitutive models were evaluated employing a catalogue of 40 unidirectional cyclic simple shear tests with a variety of relative densities between 35% and 80% and effective vertical stresses between 40 and 80 kPa. The authors evaluated three coupled constitutive models (PDMY02, PM4SAND and PDMY03) using cyclic direct simple shear tests and for decide input parameters used in the model, procedures are recommended. The ability of the coupled model to capture dilation as strength is valuable because the studied models reasonably capture the cyclic performance noted in the experiments and should be utilized to conduct effective stress-based 1D and 2D site response analysis. Sandy soils may become softer and liquefy during earthquakes as a result of pore-water pressure (PWP) development, which may have an impact on seismic design and site response. The tested constitutive models are mathematically coupled with a cyclic strain-based PWP generation model and can capture small-strain stiffness and large-strain shear strength. Results show that there are minor discrepancies between measured and computed excess PWP ratios, indicating that the tested constitutive models provide reasonable estimations of PWP increase during cyclic shear (r_u) and the banana shape is reproduced in a proper way indicating that dilation and shear- strain behavior is well captured by the models.

• Earthquakes and Structures
• /
• 제24권6호
• /
• pp.455-475
• /
• 2023

The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

• Geomechanics and Engineering
• /
• 제8권5호
• /
• pp.663-674
• /
• 2015

Many seismically vulnerable regions in India and worldwide are located on deep soil deposits which extend to several hundred meters of depth. It has been well recognized that the earthquake shaking is altered by geological conditions at the location of building. As seismic waves propagates through uppermost layers of soil and rock, these layers serve as filter and they can increase the duration and amplitude of earthquake motion within narrow frequency bands. The amplification of these waves is largely controlled by mechanical properties of these layers, which are function of their stiffness and damping. Stiffness and damping are further influenced by soil type and thickness. In the current study, an attempt has been made to study the seismic site response of deep soils. Three hypothetical homogeneous soil models (e.g., soft soil, medium soil and hard soil) lying on bedrock are considered. Depth of half space is varied from 30 m to 2,000 m in this study. Controlled synthetic motions are used as input base motion. One dimensional equivalent linear ground response analyses are carried out using a computer package DEEPSOIL. Conventional approach of analysing up to 30 m depth has been found to be inadequate for deep soil sites. PGA values are observed to be higher for deeper soil profiles as compared to shallow soil profiles indicating that deeper soil profiles are more prone to liquefaction and other related seismic hazards under earthquake ground shaking. The study recommends to deal the deeper soil sections more carefully for estimating the amplification factors for seismic hazard assessment at the surface.

• 한국지리정보학회지
• /
• 제10권4호
• /
• pp.142-152
• /
• 2007

지반정보DB는 NGIS 2단계 기본계획의 하나인 '지하지리정보'구축의 기초자료로써, 건설교통부가 2000년부터 전국토를 대상으로 구축하고 있다. 구축된 지반정보는 지층의 심도, 종류, 색 및 지하수위 등 지하의 상태정보 뿐만 아니라, 표준관입시험, 압축시험 등의 건설공사 설계업무에 적용가능한 공학정보를 포함하고 있다. 그러나 현재는 시험 결과서만 제공되고 있기 때문에 공학업무의 지반의 해석 및 설계에 활용하기 어려운 실정이다. 본 연구는 지반정보DB의 효과적인 활용지원을 위하여 웹기반의 지리공간정보 시스템을 개발하였다. 먼저, 지반정보DB에서 공간정보, 지층정보 및 공학 시험정보를 실시간으로 불러와 지반단면모델을 생성하고, 이를 통해 해당 지반의 토공량, 지지력, 침하량을 산정하고, 연약지반, 액상화에 대한 평가를 수행하는 웹 클라이언트를 개발하였다. 본 시스템을 통해 지반정보 DB를 건설공사의 계획 및 설계 등 실무 전반에 적극 활용할 수 있을 것이다.