• KSBB Journal
• /
• v.14 no.6
• /
• pp.696-701
• /
• 1999

The enzymatic hydrolysis of Castor oil for the mass production of ricinoleic acid was studied to find out the optimum conditions such as solvents and the weight ratio of substrate to enzyme. Three different lipases were tested for the hydrolysis of castor oil: lipase from Porcine Pancrease(lipsase PP), lipase from Candida cylindracea(lipase CC), lipase from Candida Rugosa(lipase CR). The poor mass transfer in water caused a low degree of hydrolysis of castor oil. To overcome this problem, organic solvents were used. Among organic solvents tested, hydrophobic solvents gave better results of hydrolysis than hydrophilic solvents. Organic solvents also lowered or changed the effect of pH. Isopropyl ether made complete hydrolysis of castor oil. The ratio of water to isopropyl ether and the ratio of weight ratio of lipase to castor oil were important for the hydrolysis of castor oil. At 30$^{\circ}C$ castor oil was completely hydrolyzed by 4 wt% of lipase in the mixture of isopropyl ether and water(1:1 in volume).

• Journal of Microbiology and Biotechnology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 1997

Two commercially available lipases, Lipase OF (non-specific lipase from Candida rugosa) and Lipolase 100T (1, 3-specific lipase from Aspergillus niger), were immobilized on insoluble hydrophobic support HDPE (high density polyethylene) by the physical adsorption method. Hydrolysis performance was enhanced by mixing a non-specific Lipase OF and a 1, 3-specific Lipolase 100T at a 2 : 1 ratio. The results also showed that the immobilized lipase maintained its activity at broader temperature ($25~55^{\circ}C$) and pH (4-8) ranges than soluble lipases. In the presence of organic solvent (isooctane), the immobilized lipase retained most of its activity in upto 12 runs of hydrolysis experiment. However, without organic solvent in the reaction mixture, the immobilized lipase maintained most of its activity even after 20 runs of hydrolysis experiment.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.339-343
• /
• 2006

The aim of this paper is to improve moisture regain of PET fabrics using a lipase treatment. Effects of nine lipase sources, lipase activator and nonionic surfactant on moisture regain of PET fabrics are examined. Moisture regains of lipase-treated samples improve by two times in average compared with untreated and buffer-treated samples. Alkaline treatment creates larger pitting by more aggressive attack into fiber which is proved by SEM and water contact angle measurement. Moisture regain by alkaline treatment ($0.568%{\pm}0.08$) does not improve. However, lipase-treatment (L2 treatment) improves moisture regain up to 2.4 times ($1.272%{\pm}0.05$). Although lipase treatment is more moderate than alkaline treatment, lipase hydrolysis on PET fabrics improves moisture regain, efficiently. K/S values improved confirm that carboxyl and hydroxyl groups are produced on the surface of PET fabrics by lipase hydrolysis. Moisture regain and dyeability improve by lipase hydrolysis on PET fabrics.

• Textile Coloration and Finishing
• /
• v.8 no.4
• /
• pp.25-30
• /
• 1996

This study was carried out to examine the effect of lipase on the removal of tripalmitin in the various conditions of washing. The relations between the removal and the hydrolysis of tripalmitin by lipase were discussed. The hydrolysis characteristics of lipase were examined by a colorimetric determination of liberated fatty acids as a new assay of lipase in reverse micelies. The hydrolysis of tripalmitin by lipase was increased with the increase of reaction time and reaction above lipase concentration 150mg/l pH at reaction temperature 4$0^{\circ}C$.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.489-493
• /
• 2004

The hydrolysis characteristics of various fatty acids composing the fish oil was investigated for function of acyl chain specificities using Lipase-OF 360,000 from Candida cylindracea. The hydrolysis of fatty acids decreased with the increase of the number of carbon and double bond in the fatty acids, in case that the number of double bond and the position of the first double bond from the methyl group of fatty acids were the same. The position of the first double bond was found to be an acyl chain specificity of Lipase-OF 360,000 for the hydrolysis of fish oil. Lipase-OF 360,000 also showed the another acyl chain specificity that the increase of double bond of fatty acids, having the same number of carbon and the position of double bond, brought about the decrease of hydrolysis.

• Journal of the Korean Applied Science and Technology
• /
• v.2 no.1
• /
• pp.77-81
• /
• 1985

In order to investigate the effect of ginseng saponins on the activity of lipoprotein lipase, it was attempted to conform the enzymatic hydrolysis of chylomicron with post-heparin induced plasma lipoprotein lipase of normal rabbit in vitro. And the activity of lipoprotein llipase was determined by the quantitative determination of liberated free fatty acids on the hydrolysis of chylomicron. As the result, it was observed that the ginseng saponins accelerated the hydrolysis of chylomicron by post-heparin plasma in vitro. And the optimum concentration of ginseng saponins for the activity of the lipoprotein lipase in the 2% bovine serum albumin was $10^{-4}%$. But ginseng saponins on the hydrolysis of chylomicron was influenced by the presence and the absence of albumin. And the optimum concentration of albumin and Na-cholate on the activity of lipoprotein lipase was each of the $10^{-6}%$ albumin and 5mM Na-cholate. From these results, it seems that ginseng saponins might stimulate the intravascular hydrolysis of chylomicron.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.377-382
• /
• 1991

Reef tallow was hydrolyzed with lipase under the conditions of liquid state and solid state. Lipase OF 360 was used for that purpose, and the lipase had the maximum activity when the olive oil was used as a substrate at pH 6 and $37^{\circ}C$. Beef tallow was dispersed by an agitator to perform a liquid enzymatic reaction. Water content, reaction temperature, and enzyme amount were varied as parameters affecting hydrolysis percentage. Ninety three percents of tallow were hydrolyzed at the following conditions: water content 80% w/w, temperature $37^{\circ}C$, and enzyme amount 200 unitlg tallow. In order to conduct a solid phase enzymatic reaction, sonication was employed for pretreating tallow with the enzyme solution. Molten tallow was sonified with the enzyme solution, and solidified by lowering temperature. And then hydrolysis reaction proceeded at $30^{\circ}C$. Sonication intensity and time were varied to control hydrolysis percentage. Optimum values of the intensity and the time were found to exist since the hydrolysis percentage did not increase further according to the increases of the intensity and the time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.6
• /
• pp.670-677
• /
• 2011

This study is to optimize the enzymatic processing conditions of Polylactic Acid (PLA) fiber using lipase from Porcine pancreas as an environmental technology. Hydrolytic activity dependent on pH, temperature, enzyme concentration, and treatment time, and structural change of PLA fiber were evaluated. The PLA fiber hydrolysis by lipase was maximized at 50% (o.w.f) lipase concentration $50^{\circ}C$ for 120 minutes under pH 8.5. There was a change of the protein absorbance in the treatment solution before and after the lipase treatment. In addition, there was no substantial change in the molecular and crystalline structures of PLA by lipase treatment as confirmed by DSC, XRD, and FT-IR.

• Fisheries and Aquatic Sciences
• /
• v.12 no.1
• /
• pp.16-23
• /
• 2009

Lipids were extracted from marine rotifer, Brachionus rotundiformis in order to examine the functionality of lipid enzymatic modification. The fatty acids, palmitic, linoleic, oleic and stearic acids were the dominant forms accounting for approximately 35.8%, 21.5%, 15.9% and 7.7% of the total lipid content, respectively. Lipid fractions were categorized as neutral lipids (38.5%), glycolipids (45.9%) and phospholipids (17.6%), and after extraction from the rotifer were isolated by thin-layer chromatography (TLC) as free fatty acids (FFA), monoacylglycerol (MAG), diacylglycerol (DAG) and triacylglycerol (TAG). The production of polyunsaturated fatty acid (PUFA) concentrate from rotifer lipids was studied using lipase-catalyzed hydrolysis. In addition, rotifer lipids were modified by hydrolysis using lipases such as porcine pancreas, Candida rugosa and Rhizomucor miehei. The lipase from Rhizomucor miehei was effective in extracting linoleic acid (C 18:2), while the lipase from Candida rugosa was effective in palmitic acid (C16:0) extraction.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.60-64
• /
• 1985

To utilize microbial lipases for hydrolysis of milk fat, optimum reaction conditions and characteristics of enzymatic reactions of lipases originated from Rhizopus delemar, Mucor sp., and Candida cylindracea were investigated. Optimum pH and temperature were pH 5.6 and $45^{\circ}C$ for Rhizopus delemar lipase, pH7.5 and $35^{\circ}C$ for Mucor sp. lipase, and pH7.5 and $35^{\circ}C$ for Candida cylindracea lipase. Optimum lipase concentration and optimum substrate concentration were $600{\sim}800\;units/ml$ and 20% milk fat, regardless of their origin. Km values were 6.06% milk fat for Rhizopus delemar lipase, 7.69% for Mucor sp. lipase and 7.99% for Candida cylindracea lipase. Rate of lipid hydrolysis was Rhizopus delemar lipase>Mucor sp. lipase>Candida cylindracea lipase. As the reaction time was extended, liberation of short chain fatty acids was increased. After 8 hours reaction, capric acid content significantly increased with Candida cylindracea lipase, palmitic acid with Mucor sp. lipase and butyric acid with Rhizopus delemar lipase.