• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.3
• /
• pp.200-204
• /
• 2012

In the repair of unilateral complete cleft lip, the most popular method is the rotation-advancement by Millard. Despite advantages of Millard repair, a few pitfalls exist. Above all, some of the scars, at the height of the cleft side philtral ridge, cross the Langer's line. Further, in the repair of complete cleft lip, small triangular lateral lip flap is often added in the base of an advancement flap to level the Cupid's bow. Moreover, preservation of the advancement flap has some negative effects on a primary nasal repair. As a result, the shape of philtrum is somewhat unnatural. Therefore, I applied the extended Mohler repair in the six cases of complete wide cleft lip to get a more esthetic scar. As a result, more natural, straight philtral ridge was obtained, without adding small triangular flap in the base of the advancement flap.

• Archives of Plastic Surgery
• /
• v.39 no.3
• /
• pp.244-248
• /
• 2012

Many types of upper lip reconstruction have been introduced to treat defects after a tumor excision or trauma. The authors treated two cases of upper lip defects. A 35-year-old woman presented with a squamous cell carcinoma of the left upper lip that had invaded the corner of the mouth. After resecting the tumor, the defect was $3.7{\times}3.5cm$ in size. A 52-year-old woman presented with a dog bite of the right upper lip. The defect measured $4.0{\times}2.2cm$ in size. The two cases were reconstructed by combined rotation and advancement of a cheek flap. This technique produced a good functional outcome that allowed for oral competence and created an opening of adequate size. A combination of rotation and an advancement flap can be used to treat upper lip defects in a single-stage procedure. This approach produces a good functional and cosmetic outcome.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.51-55
• /
• 2014

This paper was analyzed for a sealing characteristics of single lip contact type o-ring and multiple lip contact type packing for a swivel joint using the finite element method. According to the FE analysis, a conventional o-ring produces a maximum contact normal stress of 2.5MPa for a supplied LP gas pressure of 1.8MPa, which is related to the sealing performance. But, a sealing performance of newly invented multi-lip packing produces a maximum contact normal stress of 3.01MPa, which is 20.4% higher than that of a conventional o-ring. And an extrusion of a conventional o-ring, which is strongly related to the sealing endurance safety, was occurred at a supplied gas pressure of 1.62MPa. But, a multi-lip packing does not produce up to the gas pressure of 1.8MPa. This means that a new type of multi-lip packing may have excellent sealing characteristics because of no extrusion for high gas pressure. Thus, multi-lip packing with multiple lip contacts may be useful for high sealing and endurance safety compared to that of the conventional o-ring with a single lip contact.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.23-29
• /
• 2018

Objective: In accordance with the changing demographics in the United States, orthodontists working on various ethnic populations should be more conscious when using the standardized profile analyses for the African American patient. The objective of this study was to examine whether the perception of lip protrusiveness in modern African American faces has changed. For this purpose, we investigated the most favorable African American lip profile using the opinions of 10 experienced and 10 newly trained younger orthodontists. Methods: Attractiveness was converted to a number on visualized analog scales. Comparative ranks on 16 African American profiles, with focus on lip protrusiveness and thickness, were made among the groups. Mixed-effects linear regression models were fit and group differences were estimated. Results: Younger orthodontists favored a more protrusive lip profile, and the variance in their perceptions was narrower than those of older orthodontists. Measurements related to upper lip protrusion showed the strongest correlation to attractiveness (r = -0.82). The association with attractiveness decreased linearly as the protrusiveness of the upper lip increased. Steiner's E-line was the most influential reference for determining the level of attractiveness for the older orthodontists, whereas upper lip protrusion was the most influential factor for the young orthodontists. Conclusions: An adequate level of lip protrusiveness and thickness should be essential for maintaining attractive esthetics in African American patients. Yet, a new set of standards for prominent lips in this population is necessary to reflect the current trend in the concept of a beautiful face in the modern world.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.486-493
• /
• 2000

Extrusion die-lip buildup has direct and negative impact on the properties of the final product. At the present time there is no absolute method of die-lip prevention. However, a Periodical shut down of extrusion line for the removal has been the general practice throughout the industry in concern. In this study the die-lip buildup was Investigated with a particular attention paid to the influence of die exit geometry and dimensions on the stresses produced at the point of die exit. To demonstrate the relationship between the stress state and the magnitude of the die-lip buildup, a method of virtual manufacturing was performed, assuming elastic-plastic material behavior for the high-density polyethylene under investigation. The overall numerical results suggested that the longer the die-land and/or the smaller the areal reduction of the die would reduce the tendency for the die-lip formation. Similarly, haying a fillet around the circumferential edge of the die exit would be favorable in decreasing the die-lip buildup.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.1-6
• /
• 2002

In the extrusion process, the working material is forced to flow through a die with the desired profile. In general the width of m extruded section is limited to about an inch less than the diameter of the round billet But through the lip die, material is spreaded to produce a wider extruded section than the diameter of round billet. In this study, the extrusion process of an aluminum plate using the lip die is investigated. The width of extruded plate is 450nm that is formed form the round billet with a diameter of 250mm. The flow characteristic through the lip die is considered to produce the wide-extruded plate with a small billet.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.108-114
• /
• 2017

Lip reading is a field of image processing to assist the process of sound recognition. In some environment, the capture of sound signal usually has significant noise and therefore, the recognition rate of sound signal decreases. Lip reading can be a good feature for the increase of recognition rates. Conventional lip extraction methods have been proposed widely. Maia et. al. proposed a method by the sum of Cr and Cb. However, there are two problems as follows: the point with maximum saturation is not always regarded as lips region and the inner part of lips such as oral cavity and teeth can be classified as lips. To solve these problems, this paper proposes a method which adopts the histogram-based classifier for the extraction of lips region. The proposed method consists of two stages, learning and test. The amount of computation is minimized because this method has no color conversion. The performance of proposed method gives 66.8% of detection rate compared to 28% of conventional ones.

• Archives of Plastic Surgery
• /
• v.43 no.3
• /
• pp.242-247
• /
• 2016

Background Median cleft lip is a rare anomaly consisting of a midline vertical cleft through the upper lip. It can also involve the premaxillary bone, the nasal septum, and the central nervous system. In our current report, we present the clinical features of 6 patients with a median cleft lip and their surgical management according to the accompanying anomalies. Methods From December 2010 to January 2014, 6 patients with a median cleft lip were reviewed. Five of these cases underwent surgical correction; alveolar bone grafting was performed in a patient with a median alveolar cleft. The surgical technique included inverted-U excision of the upper lip and repair of the orbicularis oris muscle. The mean follow-up period was 20.4 months (range, 7.4-44.0 months). Results The study patients presented various anomalous features. Five patients received surgical correction, 4 with repair of the median cleft lip, and one with iliac bone grafting for median alveolar cleft. A patient with basal sphenoethmoidal meningocele was managed with transoral endoscopic surgery for repair of the meningocele. Successful surgical repair was achieved in all cases with no postoperative complications. Conclusions Relatively mild forms of median cleft lip can be corrected with inverted-U excision with good aesthetic outcomes. In addition, there is a broad spectrum of clinical features and various anomalies, such as nasal deformity, alveolar cleft, and short upper frenulum, which require close evaluation. The timing of the operation should be decided considering the presence of other anomalies that can threaten patient survival.

• Archives of Plastic Surgery
• /
• v.47 no.3
• /
• pp.277-280
• /
• 2020

Functionally, the lip serves to prevent food and drink from spilling out of the beginning of the gastrointestinal tract, and it is also used for vocalization. In addition, the lip has cosmetic importance as part of the face involved in making expressions, and in many cultures, it is considered to be sexually appealing. The results of lip reconstruction procedures must therefore be both functionally and cosmetically satisfactory. When the orbicularis oris muscle and oral mucosa are excised, functional reconstruction is prioritized. In contrast, if there are no functional problems, cosmetic reconstruction is the main focus. This case involved the reconstruction of a right upper lip defect caused by a dog bite. When the skin defect was covered with a local flap, the right angulus oris shifted medially, so we incorporated a YV flap at the right angulus oris to modify its position and allow for a cosmetically satisfactory result. We believe that this method can be used not only for cases in which asymmetry of the angulus oris is expected to occur at the time of lip reconstruction, but also for cases in which it has already occurred in the initial operation.

• Proceedings of The Korean Cleft Lip And Palate Association
• /
• 2003.06a
• /
• pp.27-27
• /
• 2003