• Structural Engineering and Mechanics
• /
• 제69권6호
• /
• pp.591-605
• /
• 2019

Investigations on seismic performance of eccentrically braced frames equipped with dual vertical links have received little attention. Therefore, the main goal of this paper is to describe design steps for such frames and evaluate nonlinear performance of this system according to the reliability analysis. In this study, four and eight story frame structures are analyzed and the response modification factors for different intensity and damage levels are derived in a matrix form based on a new approach. According to the obtained results, the system has high ductility and acceptable seismic performance. Moreover, it is concluded that using response modification factor equal to 8 in the design of system provides desirable seismic reliability under the design and maximum probable hazard levels. Due to desirable performance and significant advantages of the dual vertical links, this system can be used as a main lateral load bearing system, in addition to its application for rehabilitation of damaged structures.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.407-422
• /
• 2000

This article is concerned with the selecting predictor variables to be included in building a class of binary response t-link regression models where both probit and logistic regression models can e approximately taken as members of the class. It is based on a modification of the stochastic search variable selection method(SSVS), intended to propose and develop a Bayesian procedure that used probabilistic considerations for selecting promising subsets of predictor variables. The procedure reformulates the binary response t-link regression setup in a hierarchical truncated normal mixture model by introducing a set of hyperparameters that will be used to identify subset choices. In this setup, the most promising subset of predictors can be identified as that with highest posterior probability in the marginal posterior distribution of the hyperparameters. To highlight the merit of the procedure, an illustrative numerical example is given.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.85-86
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1299-1302
• /
• 1999

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) was used to demonstrate cross-linking of peptides induced by transglutaminase. The presence of ε-( Υ-glutamyl)lysine isopeptide cross-link in the acid hydrolysate of the cross-linking reaction mixture was also demonstrated by MALDI-TOF-MS without prior separation. MALDI-TOF-MS quickly provided peptide mass maps after pronase digestion of the cross-linked peptide adduct, which enabled us to monitor the hydrolytic sequence. Pronase appears to preferentially hydrolyze peptide bonds distant from the cross-link before hydrolyzing peptide bonds around the cross-link. The results suggest that pronase digestion followed by MALDI-TOF-MS could be used for determination of amino acid sequence around a modification site.

• 구강회복응용과학지
• /
• 제36권1호
• /
• pp.1-11
• /
• 2020

목적: 본 연구의 목적은 polyetherketoneketone (PEKK)의 표면 처리 방식에 따른 세가지 종류의 임시 보철물 제작용 레진과의 전단결합강도를 비교하는 것이다. 연구 재료 및 방법: 60개의 PEKK 시편을 110 ㎛의 산화알루미늄 입자(Cobra, Renfert GmbH, Hilzinge, Germany)로 분사 처리하고 시편에 Visio.link (Bredent, Senden, Germany)를 도포하지 않은 군(U)과 도포한 군(P)으로 30개씩 나누었다. 이후 한 변이 3.2 mm인 정사각형의 모양으로 polymethylmethacrylate (PMMA), polyethylmethacrylate (PEMA), bis-acryl composite resin을 PEKK에 각각 20개씩 접착하여 총 6개의 군(UM, UE, UC, PM, PE, PC)으로 분류하였다. 완성된 시편은 37℃의 증류수에 24시간 보관하였다. 만능재료시험기의 크로스헤드의 속도를 2 mm/min로 설정하고 전단결합강도를 측정하였다. 각 군간의 전단결합강도 값의 유의차를 확인하기 위하여 일원배치분산분석(one-way ANOVA)과 Tukey HSD test를 시행하였다. 결과:UM, UE군은 UC군과 유의한 전단결합강도의 차이를 나타내었다(P < 0.05). PC군이 UC군보다 높은 전단결합강도를 나타내었다(P < 0.05). 결론: 임상적으로 PEKK에 PMMA와 PEMA를 접착하는 경우에 Visio.link의 적용이 필요하지 않으나, bis-acryl composite resin을 접착하는 경우에는 Visio.link의 적용이 추천된다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제2B권3호
• /
• pp.81-89
• /
• 2002

The sensorless AC motor drive is a popular topic of study due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of motors including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of the sensorless AC motor drive. However, the output voltage of the SVPWM-VSI, which is widely used in sensorless AC motor drives, has considerable errors. In particular, the SVPWM-VSI is error-prone in the low speed range because the constant DC link voltage causes poor resolution in a low output voltage command and the output voltage is distorted due to dead time and voltage drop. This paper investigates a novel high-performance strategy for overcoming these problems in a sensorless ac motor drive. In this paper, a variation of the DC link voltage and a direct compensation for dead time and voltage drop are proposed. The variable DC link voltage leads to an improved resolution of the inverter output voltage, especially in the motor's low speed range. The direct compensation for dead time and voltage drop directly calculates the duration of the switching voltage vector without the modification of the reference voltage and needs no additional circuits. In addition, the proposed strategy reduces a current ripple, which deteriorates the accuracy of a monitored current and causes torque ripple and additional loss. Simulation and experimentation have been performed to verify the proposed strategy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.812-814
• /
• 1999

In this paper, we propose a new control algorithm based on the neural network(NN) feedback compensation with a desired trajectory modification. The proposed algorithm decreases trajectory errors by a feed-forward desired torque combined with a neural network feedback torque component. And, to robustly control the tracking error, we modified the desired trajectory by variable structure concept smoothed by a fuzzy logic. For the numerical simulation, a 2-link robot manipulator model was assumed. To simulate the disturbance due to the modelling uncertainty. As a result of this simulation, the proposed method shows better trajectory tracking performance compared with the CTM and decreases the chattering in control inputs.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1558-1565
• /
• 2018

Three-phase current is reconstructed from the dc-link current in an AC machine drive with a single current sensor. Switching pattern modification methods, in which the magnitude of the effective voltage vector is secured over its minimum, are investigated to accurately reconstruct the three-phase current. However, the existing methods that modify the switching pattern cause voltage and current distortions that degrade sensorless performance. This paper proposes a variable-magnitude voltage signal injection method based on a high frequency voltage signal injection. The proposed method generates a voltage reference vector that ensures the minimum magnitude of the effective voltage vector by varying the magnitude of the injection signal. This method can realize high quality current reconstruction without switching pattern modification. The proposed method is verified by experiments in a 600W Interior permanent magnet synchronous machine (IPMSM) drive system.

• Journal of Digestive Cancer Reports
• /
• 제1권2호
• /
• pp.89-94
• /
• 2013

The dramatic increase in colorectal cancer incidence in the population of East Asia indicates that diet and lifestyle play a role in colorectal cancer risk. Colorectal cancer prevention and etiologic studies have long provided dietary modification strategies for colorectal cancer prevention. In this review, we provide an overview of the epidemiologic evidence on the association between diet and colorectal cancer risk. Several cohort studies and a few intervention studies, most conducted in Western countries, have shown a possible link between red and processed meat, alcoholic beverages, calcium, vitamin D, vitamin B and the Western dietary pattern with colorectal cancer development. For colorectal cancer prevention in both Western and Asian populations, dietary modification is a key component of colorectal cancer prevention.

• Journal of Digestive Cancer Research
• /
• 제1권2호
• /
• pp.89-94
• /
• 2013

The dramatic increase in colorectal cancer incidence in the population of East Asia indicates that diet and lifestyle play a role in colorectal cancer risk. Colorectal cancer prevention and etiologic studies have long provided dietary modification strategies for colorectal cancer prevention. In this review, we provide an overview of the epidemiologic evidence on the association between diet and colorectal cancer risk. Several cohort studies and a few intervention studies, most conducted in Western countries, have shown a possible link between red and processed meat, alcoholic beverages, calcium, vitamin D, vitamin B and the Western dietary pattern with colorectal cancer development. For colorectal cancer prevention in both Western and Asian populations, dietary modification is a key component of colorectal cancer prevention.