• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.91-92
• /
• 2016

무선 센서 네트워크에서 무선통신기술을 활용한 저비용의 정밀 측위 기술은 교통상황, 의료, 생활정보 등의 다방면에서 활용되고 있다. RSSI를 기반으로 한 측위기법은 TOA, AOA, TDOA에 비해 추가적인 전력 또는 하드웨어가 필요하지 않아 비용 면에서 효율적이다. 하지만 RSSI 값의 패턴은 실제 환경에서 전파방해 요소가 존재하여 작은 움직임에도 크게 변하게 되는 문제점이 있다. 본 논문에서는 RSSI와 IEEE 802.15.4 표준에서 제공되는 정보인 LQI를 이용하여 타겟 노드의 실내 위치를 추정하는 기법을 제안한다. 제안하는 기법을 통해 실제 환경에서 보다 정확한 위치추정을 할 수 있음을 보여준다.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.11-19
• /
• 2010

ZigBee is a standard for wireless personal area networks(WPANs) based on the IEEE 802.15.4 standard. It has been developed for low cost and low power consumption. There are two alternative routing schemes that have been proposed for the ZigBee standard: Ad-hoc On-Demand Distance Vector(AODV) and tree routing. The tree routing forwards packets from sensors to a sink node based on the parent-child relationships established by the IEEE 802.15.4 MAC topology formation procedure. In order to join the network, a sensor node chooses an existing node with the strongest RSSI(Received signal strength indicator) signal as a parent node. Therefore, some nodes carry a large amount of traffic load and exhaust their energy rapidly. To overcome this problem, we introduce a new metric based on link quality and traffic load for load balancing. Instead of the strength of RSSI, the proposed scheme uses the new metric to choose a parent node during the topology formation procedure. Extensive simulation results using TOSSIM(TinyOS mote SIMulator) show that the CFR scheme outperforms well in comparison to the conventional tree routing scheme.

• Journal of the Korean Society for information Management
• /
• v.39 no.2
• /
• pp.233-254
• /
• 2022

Link reduction algorithms such as pathfinder network are the widely used methods to overcome problems with the visualization of weighted networks for knowledge domain analysis. This study proposed NetRSQ, an indicator to measure the goodness of fit of a link reduction algorithm for the network visualization. NetRSQ is developed to calculate the fitness of a network based on the rank correlation between the path length and the degree of association between entities. The validity of NetRSQ was investigated with data from previous research which qualitatively evaluated several network generation algorithms. As the primary test result, the higher degree of NetRSQ appeared in the network with better intellectual structures in the quality evaluation of networks built by various methods. The performance of 4 link reduction algorithms was tested in 40 datasets from various domains and compared with NetRSQ. The test shows that there is no specific link reduction algorithm that performs better over others in all cases. Therefore, the NetRSQ can be a useful tool as a basis of reliability to select the most fitting algorithm for the network visualization of intellectual structures.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.9
• /
• pp.901-905
• /
• 2008

In this paper, we propose a detection scheme for sinkhole attacks in wireless sensor networks. Sinkhole attack makes packets that flow network pass through attacker. So, Sinkhole attack can be extended to various kind of attacks. We analyze sinkhole attack methods in the networks that use LQI based routing. For the purpose of response to each attack method, we propose methods to detect attacks. Our scheme can work for those sensor networks which use LQI based dynamic routing protocol. And we show the detection of sinkhole attack can be achieved by using a few detector nodes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3219-3236
• /
• 2012

A tree routing structure is often adopted for many-to-one data gathering and aggregation in sensor networks. For real-time scenarios, considering lossy wireless links, it is an important issue how to construct a maximum-lifetime data gathering tree with delay constraint. In this work, we study the problem of lifetime-preserving and delay-constrained tree construction in unreliable sensor networks. We prove that the problem is NP-complete. A greedy approximation algorithm is proposed. We use expected transmissions count (ETX) as the link quality indicator, as well as a measure of delay. Our algorithm starts from an arbitrary least ETX tree, and iteratively adjusts the hierarchy of the tree to reduce the load on bottleneck nodes by pruning and grafting its sub-tree. The complexity of the proposed algorithm is $O(N^4)$. Finally, extensive simulations are carried out to verify our approach. Simulation results show that our algorithm provides longer lifetime in various situations compared to existing data gathering schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2894-2909
• /
• 2015

As the number of mobile devices such as smart phones and tablets explodes, the need for new services or applications is also rapidly increasing. Smart class application is one of the emerging applications, in which most of contents are distributed to all members of a class simultaneously. It is highly required to select relay nodes to cover shadow area of radio as well as extend coverage, but existing algorithms in a smart class environment suffer from high control packet overhead and delay for exchanging topology information among all pairs of nodes to select relay nodes. In addition, the relay selection procedure should be repeated in order to adapt to the dynamic topology changes caused by link status changes or device's movement. This paper proposes the learning based relay selection algorithm to overcome aforementioned problems. The key idea is that every node keeps track of its relay quality in a fully distributed manner, where RQI (Relay Quality Indicator) is newly defined to measure both the ability of receiving packets from content source and the ability of successfully relaying them to successors. The RQI of each node is updated whenever it receives or relays broadcast packet, and the node having the higher RQI is selected as a relay node in a distributed and run-time manner. Thus, the proposed algorithm not only removes the overhead for obtaining prior knowledge to select relay nodes, but also provides the adaptability to the dynamic topology changes. The network simulation and experimental results prove that the proposed algorithm provides efficient and reliable content distribution to all members in a smart class as well adaptability against network dynamics.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.