• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.29-32
• /
• 2013

An aircraft made an emergency landing through the loss of capability controlling steering. A torsion link which is a part of steering apparatus has been adrift from the steering system and the bolt connected to the steering link has fractured. At the same time, the FLIR(Forward Looking Infrared Radar) mounted in front of the steering link has been also damaged. In the early of this investigation, we considered the failure of the FLIR had occurred first, that FLIR hit the steering link and finally the bolt fractured. The fractured section of the bolt has shown a beach mark and a dimple mark as well. The outside of the bolt has shown a large deformation by a heavy load. As a result, we have found out what the cause of the heavy load and the fractures for bolt, link and FLIR have occurred in what order.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.217-222
• /
• 1999

Usually, the failure of quasi-brittle materials is numerically difficult to describe because of the localization process with softening behavior. In this study, ADLE(Axial Deformation Link Elements) with stochastic material properties are developed to simulate the quasi-brittle material failure behavior. The ADLE method is adopted both Fictitious Crack Model and stochastic method to implement the fracture behavior with the localization behavior of quasi-brittle materials. The main objective of this paper is to show the mash independency and the capability of ADLE for the failure behavior of a quasi-brittle materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.129-146
• /
• 2000

An increasing demand for esthetic restorations has led to the development of new ceramic systems. In-Ceram, a glass-infiltrated alumina ceramic has three to few times greater flexural strength than other ceramic glass material. Because of its high strength, In-Ceram has been suggested as inlay, crown, laminate veneer and core material for resin bonded fixed partial dentures. This clinical application requires a stable resin bond to In-Ceram core. The purpose of this study was to evaluate the shear bond strength between In-Ceram core and resin cements according to various surface treatments and storage conditions. The surface of each In-Ceram core sample was subjected to one of the following treatments and then bonded to Panavia 21 or Variolink II resin cement. ; (1) sandblasting with $110{\mu}m$ aluminum oxide powder, (2) sandblasting and silanization, (3) sandblasting and Siloc treatment, (4) sandblasting and Targis link application. Each of eight bonding groups was tested in shear bond strengths after the following storage times and thermocycling. ; A) 24 hours storage in distilled water at $37^{\circ}C$, B) 5 weeks storage in distilled water at $37^{\circ}C$ C) 5 weeks storage in distilled water at $37^{\circ}C$ and thermocycled 2,000 thormocycling for every 10 days(totally 10,000 thermocycting) in $5^{\circ}C-55^{\circ}C$ bath. The bond failure modes were observed with scanning electron microscope(SEM). The results were as fellows : 1 The shear bond strengths of sandblasting group were significantly lesser than the other groups after 24 hours water storage. No significant difference of bonding strengths was found between storage time conditions(24 hours and 5 weeks). The shear bond strengths showed a tendency to decrease in Variolink II bonding groups and to increase in Panavia 21 bonding groups. 3. After thermocycling, the shear bond strengths of all groups were significantly decreased(p<0.01) and Targis link group exhibited significantly greater strengths than the other groups(p<0.05). 4. Panavia 21 bonding groups exhibited significantly greater bonding strengths in sandblasting group(p<0.01) and silane group(p<0.05) than Variolink II bonding groups. 5. In observation of bond failure modes, Targis link group showed cohesive failure in resin part and silane group and Siloc group showed complex failure and sandblasting group showed adhesive failure between In-Ceram and resin.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.722-728
• /
• 1999

When one link failure happens in BSHR/2 networks, it is possible to restore all traffics by following the ITU-T G.841 rules. However, when a node that is currently executing a ring switch receives a long-path ring bridge request for an higher priority, it shall drop its bridge and switch immediately, then enter full pass-through. Even through link connection between two nodes exists, it is impossible to restore the service. In this paper, when multi-link failures happen, the services through connected link can be restored by exchanging messages through DCC(Data Communication Channel). Partially reconstructing the ring map that is unable to restore services because of multi-link failures made it possible to restore these kinds of traffic pattenrs. This paper shows that the services through connected link can be restored by using proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.11
• /
• pp.902-910
• /
• 2013

The most representative research network in Korea, KREONET, has developed DynamicKL, an advance reservation based Network Service Agent (NSA) for user driven virtual circuit services. DynamicKL provides reservation, provisioning, release, termination, and inquiry web services for network resources by using an open standard network service interface (NSI), as well as web services for network resources by using a GUI interface. In addition, it has the RICE interface to support a protection management function per VC for virtual circuits and reservations. In this article, a protection management per VC for provisioned VCs and reservations is addressed in the DynamicKL framework, as a contribution to the VC protection management issue, which results in more manageable and reliable VC services compared to other advance reservation frameworks. An administrator can detect successful or unsuccessful VC protections in the event of a primary link failure and successful or unsuccessful VC retrievals after a primary link repair, by using RICE.

• The Journal of Engineering Research
• /
• v.7 no.1
• /
• pp.53-60
• /
• 2005

Community Wireless Networks define the next generation wireless services. Multimedia usages for financial services over community Wireless LAN (WLAN) based mesh networks require link stability. Several new services are being proposed for multimedia over WLANs. Portable Internet Services are implemented by several wireless carriers to proliferate their customer base. However, these services are still expensive and require a central telecom/wireless carrier whose monopoly and preference defines the availability of new services. Our research project identifies the usage of these critical services in public places over the financial services backbone architecture to provide efficient easy-to-use and economical services to their customers and merchants without being dependent on the central wireless carrier. The user connects to the network using his regular WLAN NIC using the Mesh Router/Bridge interconnectivity and obtains the needed multimedia and financial services from the ATM-AP Gateway, In our proposed scenario, the ATN AP-MR use AODV protocol and MR-MC is based on 802.11g/a/b IEEE standard. We use multi path routing protocols for reducing the congestion over a particular route. We demonstrate the results of our simulations and test-bed outcome to evaluate link failure rate and oversubscription factors to eliminate network congestion and non-availability of the critical financial services.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.69-81
• /
• 2013

Maintaining connectivity is essential in multi-hop wireless networks since the network topology cannot be pre-determined due to mobility and environmental effects. To maintain the connectivity, a critical point in the network topology should be identified where the critical point is the link or node that partitions the network when it fails. In this paper, we propose a new critical point identification algorithm and also present numerical results that compare the critical points of the network and H-hop sub-network illustrating how effectively sub-network information can detect the network-wide critical points. Then, we propose two localized topological control resilient schemes that can be applied to both global and local H-hop sub-network critical points to improve the network connectivity and the network resilience. Numerical studies to evaluate the proposed schemes under node and link failure network conditions show that our proposed resilient schemes increase the probability of the network being connected in variety of link and node failure conditions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.553-558
• /
• 2000

In this study, a numerical simulation that can effectively predict the interfacial fracture behavior in repaired structures is developed using the axial deformation link elements. In repaired structures, concrete and interface are considered as quais-brittle materials, and steel plate as a repair material and reinforcement are modeled as elasto-plastic materials. The behavior of repaired reinforced concrete structures under flexural loading conditions is numerically simulated, and compaired with experimental results. The strengthening effect according to the length and thickness of the repair material is studied and rip-off, debonding and rupture failure mechanism of interface between substrate and repair materials are detected. It is shown that the interface properties affect on the mechanical behavior of repaired structures. Therefore, the developed numerical method using axial deformation link elements can be used for determining the strengthening effects and failure mechanism of repaired structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10B
• /
• pp.841-848
• /
• 2004

In case of failure in the IP network services should be provided via a backup path which fully meets QoS requirements. In this regard, we in this paper suggest simple-PFC(5-PFC) to restore single link failure, iterative-PFC(i-PFC) for multiple link failures, and fault_node Avoidance-PFC(a-PFC) for failures of nodes such as routers. Taking the minimum cost rerouting problem into account, we compare and analyze performance of those three mechanisms carrying out Direct_destination Rerouting(DR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9B
• /
• pp.791-798
• /
• 2004

In case of failure in the IP network, services should be provided via a backup path which fully meets QoS requirements. In this regard, we in this paper suggest simple-PFC(s-PFC) to restore single link failure, iterative-PFC(i-PFC) for multiple link failures, and fault_node Avoidance-PFC(a-PFC) for failures of nodes such as routers. Taking the minimum cost rerouting problem into account, we compare and analyze performance of those three mechanisms carrying out Direct-destination Rerouting(DR).