• Advances in concrete construction
• /
• 제8권4호
• /
• pp.269-276
• /
• 2019

The cracking and spalling caused by fracture of concrete lining have adverse impacts on serviceability and durability of the tunnel, and the subsequent maintenance work for damaged structure needs to be specific to the damaging causes. In this paper, a particular case study of an operational tunnel structure is presented for the serious cracking and spalling behaviours of concrete lining, focusing on the multi-factors inducing lining failure. An integrated field investigation is implemented to characterize the spatial distribution of damages and detailed site situations. According to results of nondestructive inspection, insufficient lining thickness and cavity behind lining are the coupled-inducement of lining failure bahaviors. To further understanding of the lining structure performance influenced by these multiple construction deficiencies, a reliable numerical simulation based on extended finite element method (XFEM) is performed by using the finite element software. The numerical model with 112 m longitudinal calculation, 100 m vertical calculation and 43 m vertical depth, and the concrete lining with 1450 solid elements are set enrichment shape function for the aim of simulating cracking behavior. The numerical simulation responses are essentially in accordance with the actual lining damaging forms, especially including a complete evolutionary process of lining spalling. This work demonstrates that the serious lining damaging behaviors are directly caused by a combination of insufficient thickness lining and cavity around the surrounding rocks. Ultimately, specific maintenance work is design based on the construction deficiencies, and that is confirmed as an efficient, time-saving and safe maintenance method in the operational railway tunnel.

• 한국터널지하공간학회 논문집
• /
• 제8권1호
• /
• pp.77-86
• /
• 2006

터널라이닝에 대한 필요성 여부에 대한 논란은 지속적으로 되고 있으나, 대부분의 터널기술자들은 라이닝의 필요성에 대하여 동의하고 있다. 따라서 설계 및 시공상의 라이닝 특성을 고려한 콘크리트 라이닝 품질향상방안 수립을 위하여 근본적인 문제점을 파악하고 해결하는데 도움이 되고자한다. 본 논문에서는 균열발생량이 상대적으로 많은 대단면 4차로 터널을 대상으로 하여 콘크리트라이닝 시공에서부터 터널운용전 발생되는 초기균열에 대한 발생원인 분석을 실시하고, 국내 콘크리트 라이닝 시공특성을 파악하기 위한 사례조사를 실시하였다. 이를 바탕으로 하여 균열발생 최소화를 위한 시공개선방안을 제안하고, 개선방안에 대한 라이닝 콘크리트 타설모형실험 및 강재거푸집내 콘크리트의 유동분석을 수행하여 고품질 콘크리트 라이닝시공을 위한 제안방안의 효율성을 검증하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.97-102
• /
• 2002

Two dimensional Analysis has been applied to most of tunnel lining design in these days. Two dimensional analysis uses beam or curved beam element for finite element method. But because the behaviors of tunnel concrete lining structure is near to shell, it is required to model the tunnel lining as shell structure for safety design of tunnel lining structure. In this paper, two dimensional analysis by beam element and the three dimensional analysis by shell element of tunnel concrete lining are studied, in which 3 type of tunnel lining and lateral pressure factors are considered. As results of the study, three dimensional analyses of the behavior of tunnel concrete lining structure considering lateral pressure factor shows that the moment of three dimensional analysis is greater than those of two dimensional analysis. The results shows that three dimensional analysis is necessary for safety design of tunnel lining.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 가을 학술발표회논문집
• /
• pp.32-37
• /
• 1993

A method of tunnel analysis for a new type of tunnel construction method (ACLCM, Automatic Concrete Lining Construction Method) is presented here. ACLCM is an unique tunnel construction method which provides concrete lining at the end of shield machine by extruding concrete into the space between the excavated ground surface and the inner form (Automatic Concrete Lining Machine). Since behaviors of tunnel and the surrounding soils are greatly influenced by the construction method, existing tunnel design methods may not be applicable to the design of ACLCM tunnel. In this study, a method of ACLCM tunnel analysis is suggested to provide the prediction of behavior of ACLCM tunnel and surrounding soils as well as to check up the safety during the construction and after the completion of ACLCM tunnel

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.621-628
• /
• 2005

The concrete lining in tunnel performs structural and nonstructural functions. The concrete lining works as a structural member for released load and residual water pressure in NATM tunnel system. Also concrete lining used for finishing the tunnel surface. The initial crack of concrete lining is reported because of difficulties in construction process, which concrete is injected into 30$\sim$40cm narrow gap between lining form and tunnel surface through 500${\times}$600mm small injection holes in the form. In this paper, we research a reason of initial crack occurrence by the case study of 4 lane wide span tunnel, and propose an improved method for crack minimization in construction process. We verify that the proposed method can give qualified concrete lining by carrying out the concrete injection model test and the numerical analysis of concrete flow.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.270-281
• /
• 2005

An especial attention for old tunnel safety is required on increasing of The various tunnel recently. Specially, the lining investigation method of the old tunnel will be able to presume condition of concrete lining indirectly. Because it is many restriction thought of environment and ground condition investigation method of tunnel lining rear. This study carried out section & convergence measurement of part which was deformed in tunnel lining. It had been observed for the change of tunnel behavior with a continuous measurement. It has been analyzed for a cause of tunnel deformation and inspected for the effect after a repair-reinforcement to tunnel compared with the effect before those by structure analysis. By establishing automatic measurement system after repair-reinforcement to tunnel, it would be accomplished to convergence measurement continually. As a result, it was observed that deflection and deformation of tunnel was convergent. but it should be followed to a continuous maintenance because of unstable ground condition, cause of inner tunnel, environment. The railroad tunnel which was executed a reinforcement of the tunnel lining must investigate the close condition of reinforcement lining and concrete lining.

• 터널과지하공간
• /
• 제9권4호
• /
• pp.296-305
• /
• 1999

많은 터널 현장에서 계측을 수행하고 있지만, 일반적인 역해석 방법으로 이 계측자료를 통해 라이닝에 작용하는 변형율과 응력 등의 역학량을 추정하기는 어렵다. 그 이유는 현장에서 계측이 가능한 적은 변위수로부터 라이닝의 응력상태를 추정할 수 없기 때문이다. 계측의 시간과 비용을 고려해 볼 때, 계측자료를 이용할 수 있는 기법의 개발은 시급한 연구과제라 할 수 있다. 본 연구에서는 터널계측에서 계측 가능한 소수의 변위로 전테 라이닝의 변위와 응력 등의 역학량을 계산할 수 있는 역해석 모델을 개발하였다. 역해석 방법으로서 복공 외면에 작용하는 외력의 자승이 최소화될 때 해를 구하는 방법을 사용하였다. 라이닝 외면에 작용하는 하중을 가정하여 유한요소법으로 변위와 응력을 계산하고, 여기서 얻은 몇개의 변위를 계측 변위로 가정하여 역해석 모델에 입력함으로써 절점 변위, 요소의 변형율 및 응력 등을 다시 구하였다. 처음 계산된 변위와 역계산으로 구한 변위를 비교함으로써 모델의 신뢰성을 평가하였다. 자동계측으로 라이닝의 비교적 정확한 계측을 수행하고 있는 지하철 한강 하저터널 현장에서 얻은 계측변위를 개발한 역해석 모델을 적용하여 실제 계측한 응력과 유사한 결과를 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.153-160
• /
• 1999

It has been recognized that the assessment of concrete lining is very uncertain and subjective depending on the engineers who are in charge. T-FLAS which was based on fuzzy theory was developed in this study for the quantitative and objective assessment of the concrete lining in tunnels. Based on the application of T-FLAS on the evaluated field data, it was shown that the assessment system using fuzzy theory(T-FLAS) can be the effective and objective method for the assessment of concrete lining.

• 한국터널지하공간학회 논문집
• /
• 제26권3호
• /
• pp.255-280
• /
• 2024

쉴드TBM 터널에서 단면 부족이나 큰 변형이 세그먼트 라이닝의 안정성에 우려될 경우 터널 외부에 지반 그라우팅으로 보강하거나 터널 내부에 강판 보강, 링 빔 보강, Inner double layer lining으로 보강하는 경우가 있다. 또한, 기존의 쉴드 TBM 터널의 해석은 세그먼트라이닝의 분절 특성을 고려하지 않는 연속체의 강성일체법으로 해석되어왔다. 본 연구는 내부 강재 라이닝으로 보강한 double layer 보강 단면에 대해 보강 메커니즘을 연구하였다. 본 연구는 세그먼트 라이닝에 대한 모델링을 개선하여 세그먼트 라이닝의 분절 특성을 고려한 분절체 모델링(BJM)을 적용하였고 이를 통해 세그먼트 라이닝의 변형 특성을 반영한 double layer 보강 단면을 해석하였다. 연구 결과 기존 콘크리트 세그먼트 라이닝은 하중을 일정부분 분담하는 역할이 아닌 터널 주변 지반을 보강한 것과 같은 역할을 하였다. 일반적으로, 세그먼트 라이닝의 분절을 고려한 BJM 모델과 분절을 고려하지 않는 강성일체법 모두 하중을 받은 라이닝의 변형 형상과 응력 분포가 유사하게 나타났다. 그러나 하중의 강도가 임계치를 넘는 경우 변형의 양상에 차이가 있으며 변형 특성을 보다 면밀히 검토할 수 있는 것으로 나타났다.

• 복식문화연구
• /
• 제16권1호
• /
• pp.48-57
• /
• 2008

The purpose of this study was to examine the inconvenience when putting on stretchable pants and to analyze the whole actual conditions of making of the lining fabrics. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study were as follows. First, the survey result for the woman consumers it showed that the most uncomfortable problem about the lining of pants was not sufficient stretch as much as the out-shell. Secondly, it was shown that many brands(46.7%) were using the lining fabrics of stretch clothes mixed with 'non-stretch fabrics' and 'stretch fabrics'. The result of lining pattern making for the stretch pants showed that the ease of the lining fabrics was 0 to 4cm in the hip girth more than out-shell. The ease in crotch width was 0 to 1.3cm for lining fabrics. But in the stretch lining fabrics the ease for front crotch width was 0 to 1cm more than out-shell. The lengths of crotch rising were -0.7 to 1.3cm for the non-stretch lining fabrics and -1 to 1cm for the stretch lining fabrics.