• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.770-775
• /
• 2002

We present the band lineups of G $e_{1-}$x S $n_{x}$ G $e_{1-}$y S $n_{y(001)}$ heterostructures for the new devices. The energy gap of the bulk G $e_{1-}$x S $n_{x}$ alloy is calculated by taking into account the Vegard's law. The change of the energy gap due to the strain is understood in terms of the deformation Potential theory The valence band offset is obtained from the average bond energy model, where the changes of the band offset due to alloy compositions and strain are included. It is found that Ge/G $e_{1-}$y S $n_{y(001)}$ heterostructure has a staggered lineup type for 0$\leq$0.06 and a straddling one for 0.06$\leq$0.26. Meanwhile, Ge/G $e_{l-y}$ S $n_{y(001)}$ heterostructure has a staggered lineup type for 0$\leq$0.19 and a broken-gap one for 0.19$\leq$0.26. As a result, the various type of the G $e_{1-}$x S $n_{x}$ G $e_{1-}$y S $n_{y(001)}$ heterostructure can be applied for the useful device.evice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.950-955
• /
• 2005

This paper describes an intelligent filler wire feeding device which can control 3- dimensional seam tracking and the filler wire speed by measuring the gap position and the joint gap width in laser welding. By means of visual sensor controlled filling the missing material into the joint gap and 3 dimensional seam tracking, lineup errors from manufacturing tolerances and the repeatability of lineup jigs and weld robot can be balanced and at an even seam quality which avoids weld defects. In this paper, we assessed weld quality in 2mm sheets of A16061 which had various gap width by using the intelligent filler wire feeding device.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.307-316
• /
• 2012

Two experiments were conducted to test effects of ethnicity and gender of face stimuli and lineup procedure on face recognition. In experiment 1, all stimuli were frontal male pictures of Southeast Asian and Northeast Asian. It was tested that whether accuracy of face recognition improve when ethnicity of participant and stimulus was identical (own-ethnicity advantage). In experiment 2, the 'own-gender advantage' was tested using images of Northeast Asian's frontal male and female faces. All participants were Northeast Asian. The results showed that the own-ethnicity advantage or the effect of line-up procedure was not found, but accuracy of face recognition was high when target face was Southeast Asian. Interestingly, the own-gender advantages was observed in only case of female participants. It was discussed that face recognition could be affected by attention.

• Agricultural and Biosystems Engineering
• /
• v.5 no.2
• /
• pp.55-59
• /
• 2004

This study aimed to develop a seeder for sowing large seeds such as those of fruit vegetables used as rootstocks in grafting. It investigated how the nozzle diameter and the nozzle's vacuum pressure affected the seeding performance. This study found that a nozzle diameter of 1.5 mm was capable of sowing most of the seed sizes used in this study. The highest seeding rates for 'Chambak', 'Tuktozwa', and 'Hukjong' were $97.6\%$, $98.8\%$, and $97.6\%$, respectively. Lineup status after sowing was good. The working performance was 75.6 sheets/hr. An average seeding rate of 1 grain was $97.8\%$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.1037-1040
• /
• 2004

Sound and vibrations enter every aspect of our daily lives. Some, like music and verbal communications, soothe and relax us; others, such as the noise and vibration from traffic or machinery, can threaten our well being. The Rion Co., Ltd. was eslablished in 1944 as an affiliate of physics and acoustic pioneer, Kobayashi Institute of Physical Research. The RION lineup affords a full line of easy-to handle measuring, recording, and analyzing equipment with innumerable applications for monitoring and maintaining a comfortable environment. RION's concern takes in all manner of sound and vibration. Our activities extend from measuring reverberation time in concert halls and testing the soundproofing characteristics of housing materials to the control and maintenance of machine noise and vibration levels.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1778-1780
• /
• 2004

Microwave heating system of KSTAR consists of ECH and LHCD. ECH and LHCD offer the reliability of operation in the beginning of plasma formation and non-inductive current drive for long time steady state operation with maintaining MHD stability, respectively. LHCD demands 5 GHz of frequency and consists of c-band waveguide, 4-port circuitor, dry dummy load, dual directional coupler, E-bend, arc detector. Our system is a lineup type pulse modulator that has 45 kV of output pulse voltage, 90 A of pulse current, 4 us of pulse width. 1:4 step-up pulse transformer, 7 stages of PFN and thyratron tube (E2V, CX1191D) are used in this modulator. The purpose of this paper is to show the modulator design and experimental result.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.339-345
• /
• 2014

PURPOSE: This study is to investigate the effect of 4 weeks of gym ball exercise on the pelvis and spine of women in 20s. METHODS: Randomly selected 10 of 20 subjects are allocated to experimental group who will practice gym-ball exercise while the rest 10 subjects are allocated to control group. Values for pelvic obliquity DL-DR, pelvic torsion DL-DR, pelvic rotation, kyphotic angle ICT-ITL (max), and lordotic angle ITL-ILS (max) were measured through recording using 3-dimensional image analyzer as a preliminary inspection. Gym-ball exercise was implemented 3 sessions a week for 4 weeks. Each session consisted of 10 minutes of warm up exercise, 30 minutes of main exercise, and 10 minutes of cool down exercise totaling 50 minutes. Post inspections were measured after exercise. RESULTS: Experimental group showed statistically significant difference in pelvic obliquity DL-DR, pelvic torsion DL-DR, and kyphotic angle ICT-ITL (max) (p<.05) and values of pelvic obliquity DL-DR showed statistically significant difference between two groups (p<.05). However pelvic rotation, lordotic angle ITL-ILS (max) did not show a significant difference. CONCLUSION: These results showed that gym-ball exercise has positive effect in the pelvic obliquity, torsion and spine kyphotic angle and expected to have positive effect on the body balance, body lineup, and coordination.

• The Research Journal of the Costume Culture
• /
• v.28 no.1
• /
• pp.131-145
• /
• 2020

As the population of consumers of outdoor wear expands, there is increasing interest among consumers in trendy lifestyle outdoor. Accordingly, it is essential to develop designs that are drawn from outdoor wear. This can be limited to traditional mountaineering suits, and designs developed from men's outdoor zip-up T-shirts, which are highly utilized in everyday life, are very important. This study developed the design of a summer zip-up T-shirt for men with both functional and aesthetic qualities. Visual images of foreign brands and domestic outdoor-focused T-shirts from the spring/summer seasons of 2013-2019 were collected to analyze the following modeling elements: silhouettes, details, colors, materials, and prints. In addition, the design concept was derived by analyzing presentations from the global outdoor trade Fairs (2013-2019). To develop a sustainable eco-friendly outdoor summer T-shirt for men, the concept was derived according to three categories: eco-friendly, sportism-expressed active elements of sports, and an outro-concept of urban town wear as an outdoor lifestyle. Thus, a total of 12 styles of design were developed. High utilization of the outdoor wear T-shirts (which are also popular as lifestyle wear), is an important aspect of building a segmented lineup of the slow-growing outdoor wear market and supports expansion of the scope of theoretical research on outdoor wear design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.546-549
• /
• 2008

Institute of Space and Astronautical Science of Japan Aerospace Exploration Agency(ISAS/JAXA) successfully developed and operated the microwave discharge ion engines onboard Hayabusa asteroid explorer. The ${\mu}10$ ion engines feature the cathode-less plasma generation in both the ion generators and neutralizers with the results of long life and high reliability in space. Based on the space achievements of ${\mu}10$ ion engines with 8mN thrust, 3,000sec Isp and 350W consumption power, several programs are currently under developments: ${\mu}20$, ${\mu}10$HIsp and ${\mu}1$. The first is a 20-cm diameter microwave discharge ion engine, aiming to achieve 30mN/kW in the thrustto-power ratio for the asteroid sample return mission larger than Hayabusa. The second is a high Isp version of ${\mu}10$, and exhausts the plasma beam over 10,000sec Isp using 15kV acceleration voltage for deep space missions to such as Jupiter and Mercury. The third is ${\mu}1$ to be adapted to small satellites for drag-free.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2519-2528
• /
• 2013

The standard of estimate is being used as basic material for appropriating construction expenses of public institutions and private institutions. The present thesis aims to propose a new form of a standard of estimate and a calculation method of work amount of equipment by targeting a representative construction type selected at river reservation work. The present thesis expects that the convenience of users can be expanded by improving applicability of a standard of estimate and simplifying a calculation process of work amount of equipment in a process planning stage so that the provision of work crew lineup information and daily productivity information is possible by a standard of estimate. In case of river conservation work, because the variables called work conditions act very largely, there exists much difficulty for generalizing productivity information and work amount of equipment, but if its accuracy could be enhanced by improving continuous productivity information and work amount information of equipment, the simplification of process planning establishment and cumulative process through a standard of estimate would be possible.