• 한국환경복원기술학회지
• /
• 제16권4호
• /
• pp.53-63
• /
• 2013

The purpose of this study is to analyze impacts of the forest fragmentation caused by development project. Furthermore, to investigate the applicability of landscape indicator when 'Feasibility of forest land conversion to other use' is conducted. The study site was consisted of golf course development and road construction. It is to compare before and after impacts of areal and linear development. As for the methods, selecting landscape indices, clustered into 3 Categories have been utilized. Category I was concerned with 'size of forest patches', II as 'shape of forest patches', and III as 'Core Area' These were calculated by FRAGSTATS, the program for analyzing fragmentation. The results showed that linear development caused more fragmented than areal development projects. Also, patch size, patch shape and core area are related to impacts of development, while Patch size decreased, patch shape and core area increased after development. Therefore, it is necessary to minimize the impacts of forest by considering fragmentation when development project is planned.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.1-9
• /
• 2012

PURPOSES: A viscoelastic axisymmetric finite element analysis code has been developed for stress analysis of asphalt pavement structures. METHODS: Generalized Maxwell Model (GMM) and 4-node isoparametric element were employed for finite element formulation. The code was developed using $C^{+}^{+}$ computer program language and named as KICTPAVE. For the verification of the developed code, a structural model of a pavement system was constructed. The structural model was composed of three layers: asphalt layer, crushed stone layer, and soil subgrade. Two types of analysis were considered for the verification: (1)elastic static analysis, (2)viscoelastic time-dependent analysis. For the elastic static analysis, linear elastic material model was assigned to all the layers, and a static load was applied to the structural model. For the viscoelastic time-dependent analysis, GMM and linear elastic material model were assigned to the asphalt layer and all the other layers respectively, and a cyclic loading condition was applied to the structural model. RESULTS: The stresses and deformations from KICTPAVE were compared with those from ABAQUS. The analysis results obtained from the two codes showed good agreement in time-dependent response of the element under the loading area as well as the surface deformation of asphalt layer, and horizontal and vertical stresses along the axisymmetric axis. CONCLUSIONS: The validity of KICTPAVE was confirmed by showing the agreement of the analysis results from the two codes.

• 한국보건간호학회지
• /
• 제29권2호
• /
• pp.165-176
• /
• 2015

Purpose: This study was conducted to examine the relationships of depression symptom, self-esteem, and stress with health-related quality of life(HRQOL) in patients with hypertension registered to a community health center. Methods: This study was a correlational survey using a convenience sampling. A total of 110 patients diagnosed with hypertension were recruited from a health center in Gyeonggi-do. The questionnaires used were the Cardiovascular Disease Specific-HRQOL questionnaire, Center for Epidemiologic Studies Depression, Rosenberg Self-Esteem Scale, and Perceived Stress Scale. The acquired data were analyzed using IBM SPSS version 22.0. Multiple linear regression analysis was performed. Results: Moderate depression symptom(${\beta}=-.368$, p<.001), severe depression symptom (${\beta}=-.450$, p<.001), stress(${\beta}=-.339$, p=.001), and gender(${\beta}=-.148$, p=.049) were significant predictors for the HRQOL. Multiple linear regression showed that 51.8% ($R^2=.518$) of the variance in the HRQOL was explained. Conclusion: Based on these results, development of an intervention or education program, to decrease depression symptoms and stress is recommended. This may improve the HRQOL in patients with hypertension registered to a community health center.

• 한국멀티미디어학회논문지
• /
• 제5권5호
• /
• pp.494-504
• /
• 2002

볼륨랜더링은 연속적인 2차원 영상들을 기반으로 하여 3차원 데이터로 만드는 것이다. 오브젝트의 내부영역까지도 가시화 할 수 있는 장점 때문에, 최근 MRI, PET, SPECT같은 의료 영상의 경우 볼릅랜더링을 이용해서 진단에 많이 사용하고 있다. 본 논문에서는 볼륨랜더링을 쉽게 할 수 있도록 2차원 데이터를 바탕으로 볼륨데이터를 만드는 방법을 제시하고, 볼륨랜더링 기법을 이용해 의료 영상에 적용시켜 보았다. 또한 2차원 데이터를 추출하는 샘플링 단계에서 해상도를 향상시키기 위해 linear interpolation과 cubic interpolation을 통해 볼륨랜더링된 영상의 공간 해상도를 조절하도록 설계 및 구현하여 보았으며, 변형함수(transfer function)를 이용하여 각각의 결과를 비교하였다 2차원 영상의 샘플링에 사용되는 interpolation 방법을 3차원 영상에 적용하여 구현하였다. 의료영상의 볼륨랜더링 기법은 3차원 입체 데이터로 구현되는 것이므로 영상 분석을 통한 진단에 크게 기여 할 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.479-484
• /
• 1996

This paper describes a method of measuring tilt motion. This method measures the tilt motion of drilling machines using a laser interferometer, a simple sliding linear bearing, measurement of the probe and the LSC(least square center) method. The next order of business is discussing the procedure of measurement. First, The measured position is considered to be the point of contact between the drill shank and the probe. The revolution of the drill axis delivers the point of contact to the probe. Second, because the laser interferometer is attached on the sliding linear bearing, any movement of probe influences laser reflector. Thus, the laser program displays the moving factor of laser reflector. Namely, this is tilt factor. Third. the points of measurement are a full circle which has 8 points (each are 45$^{\circ}$), After it is finished measuring the 8 points, let the spindle of the drilling machine move down about 5 cm. Repeating this procedure three times, we can get tilt motion's values which are calculated by LSC method. Many error factors affect the accurate measurement of tilt motion. However in this paper we ignore some error factors because they are less significant than tilt motion.

• Tribology and Lubricants
• /
• 제21권4호
• /
• pp.171-176
• /
• 2005

O-ring seal is an essential component in various mechanical apparatuses for a sealing of oil container and pressure vessels. This paper presents the sealing pressure and compressive contact behaviors of hi-polymer O-rings, which is made by an outer shell of FFKM material and an inner solid ring of FKM one. The contact normal pressure and its ratios are measured by experimental method with an automatic control system of the working temperature and analyzed numerically by using the non-linear Marc FEM program. The results show reasonably good agreements between the computed FEM results and measured ones when the operating temperature is kom normal temperature of $18^{\circ}C$ and a high temperature of $300^{\circ}C$ But the compared values between the computed and tested results show a little difference because of the increased temperature, which is related to the non-linear parameter of the O-ring material. Bi-polymer 0-ring shows a good contact normal stress and compression behavior for a given operation temperature and compression ratio.

• 한국농공학회논문집
• /
• 제58권2호
• /
• pp.53-63
• /
• 2016

Monitoring of cyanobacteria bloom in reservoir systems is important for water managers responsible of water supply system. Cyanobacteria affect the taste and smell of water and pose considerable filtration problems at water use places. Harmful cyanobacteria bloom in reservoir have significant economic impacts. We develop a new method for estimating the cyanobacteria bloom using Landsat TM and ETM+ data. Developed model was calibrated and cross-validated with existing in situ measurements from Daecheong Reservoir's Water Quality Monitoring Program and Algae Alarm System. Measurements data of three stations taken from 2004 to 2012 were matched with radiometrically converted reflectance data from the Landsat TM and ETM+ sensor. Stepwise multiple linear regression was used to select wavelengths in the Landsat TM and ETM+ bands 1, 2 and 4 that were most significant for predicting cyanobacteria cell number and bio-volume. Based on statistical analysis, the linear models were that included visible band ratios slightly outperformed single band models. The final monitoring models captured the extents of cyanobacteria blooms throughout the 2004-2012 study period. The results serve as an added broad area monitoring tool for water resource managers and present new insight into the initiation and propagation of cyanobacteria blooms in Daecheong reservoir.

• Journal of Biosystems Engineering
• /
• 제12권3호
• /
• pp.42-49
• /
• 1987

The threshing action of the head-fed type threshing unit occurs mainly by the impact between threshing tooth and grains. It may be therefore the most fundamental step to calculate the time and order of the occurrance of impact by the tooth for predicting the performance of threshing unit. The threshing teeth arrangement was defined by length and diameter of threshing dram, number of spiral arrays, number of threshing teeth by kind per one spiral array, number of windings of spiral array around the threshing drum, delay angle of impact line. The linear equations for locus of left and right margin of paddy bundle, spiral array, impact line on the development figure of the threshing drum were expressed by fastors of the threshing teeth arrangement. In the computer program, the teeth which inflict impact were searched successively along the impact line. Searching range and impact condition were defined by the relation between four linear equations. If the impacting tooth was found, time and the kind of threshing tooth was derived from the coordinate of the threshing tooth. At this time the unit torque curve was accumulated on the array of computer memory. At last the completed torque curve of threshing drum shaft was described on the computer screen. Remarkably the peack valae and fluctuation of torque curve was decreased by adopting the delay angle of impact line.

• International Journal of Aeronautical and Space Sciences
• /
• 제2권2호
• /
• pp.65-72
• /
• 2001

This paper demonstrates an explicit-implicit, finite element analysis for linear as well as nonlinear hygrothermal stress problems. Additional features, such as moisture diffusion equation, crack element and virtual crack extension(VCE) method for evaluating J-integral are implemented in this program. The Linear Elastic Fracture Mechanics(LEFM) Theory is employed to estimate the crack driving force under the transient condition for an existing crack. Pores in materials are assumed to be saturated with moisture in the liquid form at the room temperature, which may vaporize as the temperature increases. The vaporization effects on the crack driving force are also studied. The ideal gas equation is employed to estimate the thermodynamic pressure due to vaporization at each time step after solving basic nodal values. A set of field equations governing the time dependent response of porous media are derived from balance laws based on the mixture theory. Darcy's law is assumed for the fluid flow through the porous media. Perzyna's viscoplastic model incorporating the Von-Mises yield criterion are implemented. The Green-Naghdi stress rate is used for the invariant of stress tensor under superposed rigid body motion. Isotropic elements are used for the spatial discretization and an iterative scheme based on the full Newton-Raphson method is used for solving the nonlinear governing equations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.82-85
• /
• 1987

The objective of this paper is to develop computer programs to aid in the design and analysis of control systems in which nonlinear characteristics exist. Control systems are dynamic systems, which can be described using various mathematical models. A convenient model for digital computer simulation is the state model in which described using a set of linear and non linear first order differential equations. The digital simulation was performed on a IBM PC/XT personal computer, and the computer language was BASIC. There are four possible configurations from which a user may choose. When running a program, the user is asked to enter the system parameters according to a specified control system configurations are; 1. A control system with a nonlinear element followed by a plant in a feedback configurations(NLSVF1). 2. A control system with a nonlinear device situated between two plants in a feedback configurations(NLSVF2). 3. A control system with a nonlinear element followed by a plant, followed by a the dealy in feedback configurations(TLAG). 4. A motor and load with a backlash nonlinearity between dynamic portions of the motor/load configurations (BACKLASH). The matrix from state equations are integrated using combination the trapezoidal method and fixed point iteration. Several cases which have nonlinearity were implemented on the computer and the results were discussed.