• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.7-13
• /
• 2007

This study proposes a new screw measurement system that is capable of measuring the pitch or lead of a screw, which is one of the most important parameters representing the screw quality. There are various conventional methods for screw measurement including some mechanical and optical ones, but they can not be applied to measure the lead except the profiles or sizes. The newly suggested method is able to measure the pitch or lead directly. This is executed by scanning the thread with a digital probe while the target screw rotates. The devised measurement system is a integrated computer system which is composed of a stepping motor, a digital linear gauge and a chuck device for holding the measured screw. In order to operate the system effectively and conveniently, a computer program having graphical user interface facility is developed. Some experiments were done to prove the effectiveness of the system.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.368-371
• /
• 1999

In this paper, we propose a neural network processor architecture with on-chip learning and with reconfigurability according to the data dependencies of the algorithm applied. For the neural network model applied, the proposed architecture can be configured into either SIMD or SRA(Systolic Ring Array) without my changing of on-chip configuration so as to obtain a high throughput. However, changing of system configuration can be controlled by user program. To process activation function, which needs amount of cycles to get its value, we design it by using PWL(Piece-Wise Linear) function approximation method. This unit has only single latency and the processing ability of non-linear function such as sigmoid gaussian function etc. And we verified the processing mechanism with EBP(Error Back-Propagation) model.

• Journal of the Korean Magnetics Society
• /
• v.11 no.2
• /
• pp.78-83
• /
• 2001

The thermal characteristics of TMR devices by using Fast Linear Annealing method has been studied. A computer program that employs the finite differential method has been developed to simulate the temperature distribution of a diameter of 4" silicon wafer, which is subjected to radiation heat from the halogen lamp. We adopted the temperature of 350$\^{C}$, which is the highest temperature usually used in annealing for magnetic thin films. We changed moving velocity of the lamp from 0.05 mm/sec to 1 mm/sec. The moving velocity of halogen lamp has less effect on the local peak temperature of the sample only about 40$\^{C}$. Therefore, we may be able to anneal TMR devices in such short time of 1 minute and 40 seconds per one wafer, using the Fast Linear Annealing method.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.163-170
• /
• 2001

This paper presents results of nonlinear analyses for underground structures including both the soil-structure interaction and nonlinear behavior of concrete material. For this purpose, a hybrid method is employed, in which a dynamic analysis technique for a linear soil-structure interaction system and a general purpose FE program are combined in hybrid and practical manners. A couple of nonlinear analyses are carried out for framed structures in multi-layered half space soil medium. The yielding of concrete structure is considered by a multi-linear stress- strain relationship. The numerical results suggest that ductile design fur the intermediate columns in the underground framed structure is substantially important in aseismic design.

• Journal of applied mathematics & informatics
• /
• v.6 no.1
• /
• pp.79-88
• /
• 1999

This work aims to establish an algorithm for solving the problem of convex programming with several objective-functions with linear constraints. Starting from the idea of Rosen's algorithm for solving the problem of convex programming with linear con-straints and taking into account the solution concept from multi-dimensional programming represented by a program which reaches "the best compromise" we are extending this method in the case of multidimensional programming. The concept of direction of min-imization is introduced and a necessary and sufficient condition is given for a s∈Rn direction to be a direction is min-imal. The two numerical examples presented at the end validate the algorithm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2266-2273
• /
• 2000

Equations of motion of a multi-beam system undergoing overall rigid body motion are derived by employing finite element method. An orientation angle is employed to allow the arbitrary orientation o f the beam element. Modal coordinate reduction technique, which has been successfully utilized in the conventional linear modeling method, is employed for the present modeling method to reduce the computational effort. Different from the conventional linear modeling method, the present modeling method captures the motion-induced stiffness variations which are important for the dynamic analysis of structures undergoing overall rigid body motion. The numerical results are compared to those of a commercial program to verify the reliability of the present method.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.398-403
• /
• 1998

This paper describes a controller design for the stator reactive power generator in the transmission system. The controller of static reactive power generator was designed using a mathematical model and non-linear state feedback. The performance of controller was verified using computer simulation with EMTP code and experimental work with scaled-model. The dynamic interaction with a simple power system was also analyzed using both the simulation model and hardware scaled-model. Both simulation and experimental results prove that the controller using PI block and non-linear state feedback offers better performance than the controller using PI block only.

• Journal of the Korean Statistical Society
• /
• v.35 no.3
• /
• pp.281-303
• /
• 2006

In an earlier work, we investigated the problem of using linear programming to bound performance measures in a discrete time Jackson network. There it was assumed that the system evolution is controlled by the early arrival scheme. This assumption implies that the system can't be modelled by a Markov chain. This problem was resolved and performance bounds were calculated. In the present work, we use a modification of the early arrival scheme (without corrupting it) in order to make the system evolves as a Markov chain. This modification enables us to obtain explicit expressions for certain moments that could not be calculated explicitly in the pure early arrival scheme setting. Moreover, this feature implies a reduction in the linear program size as well as the computation time. In addition, we obtained tighter bounds than those appeared before due to the new setting.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.401-406
• /
• 2011

The abnormal vibration from the BTV(Brake Torque Variation) and DTV(Disc Thickness Variation) is transferred to the suspension and steering system during braking. In this paper, judder simulation is carried out using multi-body dynamic analysis program to analyze the relation of the judder and transfer mechanism which is composed of the suspension and steering system. In order to analyze the brake judder transfer system, the full vehicle model was composed with rigid body, non-linear bushing, non-linear constraints and joints. Full vehicle model analysis was compared by actual vehicle judder test and sensitivity analysis of the suspension system is carried out.

• The Mathematical Education
• /
• v.38 no.1
• /
• pp.77-85
• /
• 1999

In this paper, we analyze strategies and error patterns in solving word problems of linear equation for middle school students. From a test conducted to the sampled 106 second grade middle school students, we obtain the following results: (1)The most difficult types of word problem are velosity and density related problems. The second one is length related problems and the easist one is number related problems. (2)Regardless of the types of word problem, the most familiar strategy is the constructing algebraic equations. However, the most successful strategy is the trial and error. (3)Most likely error patterns are the use of inadequate formulas and wrong trial and errors. Based on these results, a teaching program with various schema is developed and shown to be effective for mid level students in classroom.